journal article·2025-09

Synthesis of hydrophobically modified polyacrylamide: Exploring the effect of hydrolysis on rheological and thermal properties

Somayeh Farhadi, Ahmad Ramazani Saadatabadi

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (60)

Show source-provided references
1. Comparative studies of rheological properties of polyacrylamide and partially hydrolyzed polyacrylamide solutions10.1002/app.25247 ↗
2. Effect of hydrolysis degree of hydrolyzed polyacrylamide grafted carboxymethyl cellulose on dye removal efficiency10.1007/s10570-013-9987-2 ↗
3. Hydrolysis and thermal stability of partially hydrolyzed polyacrylamide in high-salinity environments10.1002/app.47793 ↗
4. Selection and screening of polymers for enhanced-oil recovery
5. Rheology and polymer flooding characteristics of partially hydrolyzed polyacrylamide for enhanced heavy oil recovery10.1002/app.38070 ↗
6. Polymer injectivity: investigation of mechanical degradation of enhanced oil recovery polymers using in-situ rheology10.3390/en12010049 ↗
7. Development of new polymers with better performance under conditions of high temperature and high salinity
8. W.N. Diab, E.W. Al-Shalabi, Recent developments in polymer flooding for carbonate reservoirs under harsh conditions, in: Day 3 Thu, Oct. 31, 2019, OTC, 2019. 〈https://doi.org/10.4043/29739-MS〉.10.4043/29739-MS ↗
9. Improved rheology and high-temperature stability of hydrolyzed polyacrylamide using graphene oxide nanosheet10.1002/app.47582 ↗
10. Synthesis and solution properties of poly(acrylamide-styrene) block copolymers with high hydrophobic content10.1002/pen.11589 ↗
11. Association and effective hydrodynamic thickness of hydrophobically associating polyacrylamide through porous media10.1002/app.28596 ↗
12. C. St, L. Ernesto, E. Jim, M.A. De Jesús-, G. Festag, U.S. Schubert, C. Guerrero-s, Understanding the influence of chemical structure and length of hydrophobic blocks on the rheological properties of associative copolymers, vol. 143, 2021. 〈https://doi.org/10.1016/j.eurpolymj.2020.110190〉.10.1016/j.eurpolymj.2020.110190 ↗
13. Thomas · Polym. Chem. · 2019 · 1010.1039/C9PY01311C ↗
14. E.J. Regalado, J. Selb, Scaling behavior of the zero shear viscosity of hydrophobically modified poly(acrylamide)s, vol. 9297, 1998, pp. 5550–2.10.1021/ma9802982 ↗
15. Flow behavior of thermo-thickening associative polymers in porous media: effects of associative content, salinity, time, velocity, and temperature10.1007/s42452-022-04961-w ↗
16. Study on rheological behavior and salt-thickening mechanism of a synthesized twin-tailed hydrophobically modified polyacrylamide10.1016/j.molliq.2019.111619 ↗
17. Synthesis, characterization, and property evaluation of a hydrophobically modified polyacrylamide as enhanced oil recovery chemical10.1080/01932691.2015.1045600 ↗
18. Hydrophobic aggregation in aqueous solutions of hydrophobically modified polyacrylamide in the vicinity of overlap concentration10.1016/S0032-3861(03)00043-0 ↗
19. Hydrophobically associating polyacrylamides and their partially hydrolyzed derivatives prepared by post-modification. 1. Synthesis and characterization10.1016/S0032-3861(01)00774-1 ↗
20. Effects of NaCl on steady rheological behaviour in aqueous solutions of hydrophobically modified polyacrylamide and its partially hydrolyzed analogues prepared by post-modification10.1002/pi.959 ↗
21. Novel hydrophobic associating polymer with good salt tolerance10.3390/polym10080849 ↗
22. Aqueous solutions of associating poly(acrylamide-co-styrene): a path to improve drag reduction?10.1021/acs.macromol.2c01219 ↗
23. Application of a novel acrylamide copolymer containing highly hydrophobic comonomer as filtration control and rheology modifier additive in water-based drilling mud10.1016/j.petrol.2019.04.069 ↗
24. High molecular weight polyacrylamide nanoparticles prepared by inverse emulsion polymerization: reaction conditions-properties relationships10.1007/s00396-015-3803-5 ↗
25. Theoretical studies of hydrolysis and stability of polyacrylamide polymers10.1016/j.polymdegradstab.2015.08.012 ↗
26. Alkaline hydrolysis of polyacrylamide10.1023/A:1012786826774 ↗
27. A comparative study on enhancing oil recovery with partially hydrolyzed polyacrylamide: emulsion versus powder10.1002/cjce.24300 ↗
28. A chemometric approach to assess the rheological properties of durum wheat dough by indirect FTIR measurements10.1007/s11947-022-02799-z ↗
29. Synthesis of copolymer of chitosan with acrylamide as an adsorbent for heavy metal waste treatment10.1088/1757-899X/833/1/012064 ↗
30. Stability and rheological properties of HPAM/nanosilica suspensions: impact of salinity10.1016/j.colsurfa.2019.124320 ↗
31. Falcaria vulgaris leaves extract as an eco-friendly corrosion inhibitor for mild steel in hydrochloric acid media10.1038/s41598-023-30571-6 ↗
32. A zwitterionic surfactant bearing unsaturated tail for enhanced oil recovery in high-temperature high-salinity reservoirs10.1002/jsde.12024 ↗
33. Synthesis and characterization of highly hydrophilic self-associating terpolymers: rheological, thermal, and corrosion protection studies10.1016/j.cej.2020.126939 ↗
34. Upper critical solution temperature (UCST) behavior of polystyrene-based polyampholytes in aqueous solution10.3390/polym11020265 ↗
35. UV-initiated polymerization of acid- and alkali-resistant cationic flocculant P(AM-MAPTAC): synthesis, characterization, and application in sludge dewatering10.1016/j.seppur.2017.06.035 ↗
36. Solution properties of a hydrophobically associating polyacrylamide and its polyelectrolyte derivatives determined by light scattering, small angle X-ray scattering and viscometry10.1590/S0103-50532011000300012 ↗
37. Hydrophobically associating terpolymers of acrylamide, alkyl acrylamide, and methacrylic acid as EOR thickeners10.1007/s10965-016-1058-6 ↗
38. Fabrication of the weak gel based on hydrolyzed polyacrylamide crosslinked by inorganic-organic mixed crosslinker10.1007/s10965-013-0311-5 ↗
39. Oil displacement efficiency of a Silica/HPAM nanohybrid10.1021/acs.energyfuels.1c01489 ↗
40. Thermal degradation behavior and kinetic studies of polyacrylamide gel in TiO2 nanoparticles synthesis10.1007/s13726-012-0086-2 ↗
41. Evaluation of a nanocomposite hydrogel for water shut-off in enhanced oil recovery applications: design, synthesis, and characterization10.1002/app.38258 ↗
42. New nanohybrid based on hydrolyzed polyacrylamide and silica nanoparticles: morphological, structural and thermal properties10.3390/polym12051152 ↗
43. Behavior study of a thermo-responsive hydrophobically associative water-soluble terpolymer in laboratory test with heavy crude oil10.1002/app.52860 ↗
44. Evaluation of solution and rheological properties for hydrophobically associated polyacrylamide copolymer as a promised enhanced oil recovery candidate10.1016/j.ejpe.2016.10.012 ↗
45. Viscosity study of salt tolerant polymers10.1002/app.32011 ↗
46. A simple model of the rheological curve of HPAM solutions at different temperatures10.1038/s41598-024-79242-0 ↗
47. Polymer-based stress sensor with integrated readout10.1088/0022-3727/35/21/302 ↗
48. Rheological studies of nanocomposites based on hydrolyzed polyacrylamide with silica and alumina in saline media to enhance oil recovery10.1016/j.molliq.2023.122855 ↗
49. Effects of alkali, salts, and surfactant on rheological behavior of partially hydrolyzed polyacrylamide solutions10.1021/je100458a ↗
50. Effect of salt solutions on chain structure of partially hydrolyzed polyacrylamide10.1007/s11771-008-0319-x ↗
51. Characterization of co- and post-hydrolyzed polyacrylamide molecular weight and radius distribution under saline environment10.1002/app.50616 ↗
52. Molecular dynamics simulations of the conformation and diffusion of partially hydrolyzed polyacrylamide in highly saline solutions10.1016/j.ces.2019.115366 ↗
53. Impact of additives on the rheological properties of associating water-soluble multiblock polyelectrolytes10.1002/app.51270 ↗
54. Effect of aging, antioxidant, and mono- and divalent ions at high temperature on the rheology of new polyacrylamide-based co-polymers10.3390/polym9100480 ↗
55. Increasing viscosity in entangled polyelectrolyte solutions by the addition of salt10.1016/j.polymer.2011.03.053 ↗
56. Effect of charge distribution on the viscosity and viscoelastic properties of partially hydrolyzed polyacrylamide10.1021/acs.energyfuels.5b01066 ↗
57. Rheological behavior and reversible swelling of pH sensitive poly(acrylamide-co-itaconic acid) hydrogels10.1134/S0965545X16040015 ↗
58. Polyacrylamide solution aging10.1002/app.1978.070220330 ↗
59. The impact of polyacrylamide flocculant solution age on flocculation performance10.1016/S0301-7516(02)00035-2 ↗
60. Studies on the rheological properties of amphiphilic nanosilica and a partially hydrolyzed polyacrylamide hybrid for enhanced oil recovery10.1016/j.ces.2019.05.034 ↗