journal article·2026-07

Micro-XRF characterization of elemental mixing and diffusion in electron beam welded Ti–Al dissimilar joints

Raghawendra P.S. Sisodia, Piotr Sliwinski, Kalliopi Tsampa, Andreas G. Karydas

Publisher page

Abstract

This publication resulted from research activities supported by the NFFA-Europe Pilot project under the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement No. 101007417; Proposal ID 753). The Version of Record was originally published in Materials Today Communications under the DOI 10.1016/j.mtcomm.2026.115823. This repository deposit has been created in accordance with the NFFA-Europe Open Access requirements.
Source: openaire · Quality: candidate unverified · Source record ↗

References (36)

Show source-provided references
1. Joining of dissimilar materials10.1016/j.cirp.2015.05.006 ↗
2. Trends in joining dissimilar metals by welding10.4028/www.scientific.net/AMM.440.269 ↗
3. Application of a wavelength dispersive x-ray fluorescence spectrometric technique for the analysis of tantalum in titanium-tantalum alloys10.1016/0003-2670(94)00348-3 ↗
4. The application of electron beam welding for the joining of dissimilar metals: An overview10.1016/0924-0136(95)02150-7 ↗
5. Effect of laser-arc offset and laser-deviation angle on the control of a Ti-Al interlayer10.1016/j.jmatprotec.2019.04.010 ↗
6. TIG welding-brazing of Ti6Al4V and Al5052 in overlap configuration with assistance of zinc foil10.1016/j.jmatprotec.2017.08.015 ↗
7. Effect of welding time on microstructure and mechanical properties of Al-Ti ultrasonic spot welds10.1016/j.jmapro.2018.04.013 ↗
8. Microstructure and tensile properties of Ti/Al dissimilar joint by laser welding-brazing at subatmospheric pressure10.1016/j.jmapro.2020.04.062 ↗
9. Study on the wettability, intermetallic compound growth, voids formation and mechanical properties of Cu/Sn joints with changes in substrate roughness for electronic packaging10.1007/s10854-025-14931-8 ↗
10. Microstructural modification and stress corrosion mechanisms of in-situ rolling friction stir welding joints10.1016/j.matchar.2025.115884 ↗
11. Microstructures and mechanical properties analysis of TiAl joints using novel brazing filler metal10.1007/s40194-025-02210-3 ↗
12. Numerical simulation and process parameter optimization of laser spot welding for ultra-thin sheets10.1016/j.optlastec.2025.114240 ↗
13. Electron Beam Welding – Characteristics
14. G R, Electron Beam Welding of dissimilar metals
15. Advancements in laser processes for additive Manufacturing: Techniques and future directions10.1016/j.jmrt.2026.01.173 ↗
16. Kinetics of Evaporation of Alloying Elements under Vacuum: Application to Ti alloys in Electron Beam Melting10.1515/htmp-2015-0220 ↗
17. Experimental measurement of vacuum evaporation of aluminum in ti-al, v-al, ti6al4v alloys by electron beam
18. Faults and foibles of quantitative scanning electron microscopy/energy dispersive x-ray spectrometry (SEM/EDS)
19. Electron beam welding of dissimilar Titanium to aluminium: Interface microstructure and mechanical properties10.1177/09544089231190152 ↗
20. IAEA, In situ applications of X ray fluorescence techniques: final report of a coordinated research project, 2000-2003, 2005.
21. Karydas · 2015
22. Risk and benefit of diffraction in X-ray fluorescence mapping10.1016/j.sab.2016.09.018 ↗
23. Diffraction peak identification and correction in EDXRF spectroscopy10.1016/j.sab.2024.107060 ↗
24. Optimization of low-power femtosecond laser trepan drilling by machine learning and a high-throughput multi-objective genetic algorithm10.1016/j.optlastec.2021.107688 ↗
25. PhD Thesis, University of Miskolc
26. Kou · 2002
27. Electron Beam Welding Of A TMCP Steel With 700 Mpa Yield Strength10.1007/BF03321384 ↗
28. Dataset on cooling time (t8/5) and thermal cycle measurements during electron beam welding of quenched and tempered high strength structural steels
29. A multiplatform code for the analysis of energy-dispersive X-ray fluorescence spectra10.1016/j.sab.2006.12.002 ↗
30. A simple calibration procedure of polycapillary based portable micro-XRF spectrometers for reliable quantitative analysis of cultural heritage materials10.1002/xrs.2661 ↗
31. Insights into microstructure evolution and interface joining mechanism in ultrasonic spot welding of Cu/Ti-6Al-4V dissimilar joints10.1016/j.jmapro.2026.02.062 ↗
32. Welding of Ti6Al4V and Al6082-T6 Alloys by a Scanning Electron Beam10.3390/met13071252 ↗
33. XRFitVis: A Cloud‐Based Visualization Tool for μXRF Mapping Datasets10.1002/xrs.70030 ↗
34. Multi-physical process simulation of resistance spot welding available for synthetic data generation10.1016/j.jmapro.2025.03.024 ↗
35. Improving out-of-distribution generalization for online weld expulsion inspection using physics-informed neural networks10.1007/s40194-025-01950-6 ↗
36. Accelerating ultrashort pulse laser micromachining process comprehensive optimization using a machine learning cycle design strategy integrated with a physical model10.1007/s10845-022-02058-0 ↗