Influence of high melting-point elements on the microstructure and segregation behavior of Al-4.5Cu alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Segregation of Mg-6Gd alloy under natural convection: From macro solute distribution to micro dendrite growth10.1007/s41230-024-4126-2 ↗
2. Numerical simulation of macrosegregation phenomenon in Cu-6wt%Ag alloy ingots fabricated by electromagnetic stirring10.1016/j.jmrt.2023.11.220 ↗
3. Effect of casting speed on floating grains and macrosegregation of direct-chill cast 2024 alloy with intensive melt shearing10.1016/S1003-6326(21)65519-X ↗
4. Formation of inverse segregation on the surface of belt-cast Al–Fe–Si and Al-Fe-Si-Mn alloys10.1016/j.scriptamat.2007.06.004 ↗
5. Linear segregation in low-pressure casting ZL205A alloy fully enveloped castings and its formation mechanism
6. High thermal stability of Si-containing Al-Zn-Mg-Cu crossover alloy caused by metastable GPB-II phase10.1016/j.matchar.2025.114870 ↗
7. Processing map of 2219 Al alloy prepared by internal electromagnetic stirring direct chill casting10.1016/j.jmrt.2022.03.177 ↗
8. Advanced multi-scale analysis of segregation mechanisms in twin-roll casting of Al-Cu-Li alloys10.1016/j.jmatprotec.2024.118389 ↗
9. Microstructures and properties of Al–Mg–SI alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process10.1016/j.msea.2015.09.114 ↗
10. The cavitation erosion of ultrasonic sonotrode during large-scale metallic casting: experiment and simulation10.1016/j.ultsonch.2017.12.053 ↗
11. Understanding of macro-segregation in direct-chill cast 2024 alloy with intensive melt shearing based on the evolution of microstructure and temperature field10.1016/j.jmrt.2023.11.224 ↗
12. Study on micro-structure, solid solubility and tensile properties of 5A90 Al–Li alloy cast by low-frequency electromagnetic casting processing10.1016/j.jallcom.2019.153318 ↗
13. Scalable ultrasonic casting of large-scale 2219AA Al alloys: experiment and simulation
14. Evolution of microstructure and properties of novel aluminum‑lithium alloy with different roll casting process parameters during twin-roll casting10.1016/j.matchar.2020.110145 ↗
15. Effect of low cast-rolling speeds on the microstructure and mechanical properties of twin-roll casting high Mg AA5059 alloy sheets10.1016/j.jmrt.2022.05.078 ↗
16. Improvement of microstructure and properties in twin-roll casting 7075 sheet by lower casting speed and compound field10.1016/j.matchar.2017.03.024 ↗
17. Effect of electromagnetic fields on microstructure and mechanical properties of sub-rapid solidification-processed Al-Mg-Si alloy during twin-roll casting10.1016/j.msea.2019.138328 ↗
18. Abatement of segregation with the electro and static magnetic field during twin-roll casting of 7075 alloy sheet10.1016/j.msea.2014.01.042 ↗
19. Effect of trace Cr alloying on centerline segregations in sub-rapid solidified Al-Mg-Si (AA6061) alloys fabricated by twin-roll casting10.1016/j.msea.2021.141896 ↗
20. Effect of erbium on microstructure and properties of AA6061 twin-roll casting sheet10.1016/j.jallcom.2022.164458 ↗
21. Effect of ageing temper on the heat resistance of Al-Cu-Mg-Ag alloy with different compositions10.1016/j.msea.2024.146698 ↗
22. Effect of hot extrusion, novel stepwise-rolling, and heat treatment on microstructure, mechanical properties, and precipitate chemistry of ultra-high strength Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2024.177910 ↗
23. Effect of minor elements content on the phase formation and mechanical properties of 6xxx series aluminum alloy sheets10.1007/s11665-023-08211-x ↗
24. A novel Al-Ti-B alloy for grain refining Al-Si foundry alloys10.1016/j.jallcom.2009.07.064 ↗
25. High-temperature mechanical behaviour of Al-10Ce alloy with Sc, Zr, Si, and Mg alloying elements10.1016/j.matdes.2024.113524 ↗
26. Enhancing Fe tolerance in Al-Cu alloys by controlling the microstructure and mechanical properties with Mn and Cr additions10.1016/j.jmrt.2025.05.092 ↗
27. Mechanism of heterogeneous distribution of Cr-containing dispersoids in DC casting 7475 aluminum alloy10.1016/S1003-6326(22)65883-7 ↗
28. Dynamic recrystallization and precipitation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy during hot deformation10.1016/j.matchar.2021.111629 ↗
29. Synergistic effects of Mo and Ag on strengthening and corrosion resistance in marine-grade Al-5 Mg alloys
30. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
31. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
32. The effects of Al-5Ti-1B and Sr interaction on microstructure and properties of ZL10110.1007/s11665-023-08116-9 ↗
33. A quantitative study of microsegregation in aluminum-copper alloys10.1007/s11661-022-06669-3 ↗
34. Influence of Sr content on the microstructure, mechanical properties, and electrical conductivity of Al-Si-Mg alloy10.1016/j.cap.2025.03.011 ↗
35. Influence of Mg/Si ratio on the mechanical strength and electrical conductivity of Al-Mg-Si alloys
36. Effects of cooling rates on the solidification behavior, microstructural evolution and mechanical properties of Al-Zn-Mg-Cu alloys10.1016/j.jmrt.2022.12.082 ↗
37. Simultaneous refinement of α-Al and modification of Si in Al-Si alloy achieved via the addition of Y and Zr10.1016/j.jmrt.2024.03.219 ↗
38. Synergistic effects of Gd and Zr on grain refinement and eutectic Si modification of Al-Si cast alloy10.1016/j.msea.2017.03.097 ↗
39. Response of partitioning to cooling rate for different solutes in aluminum alloys10.1016/j.jmst.2023.11.009 ↗
40. Understanding of macro-segregation in direct-chill cast 2024 alloy with intensive melt shearing based on the evolution of microstructure and temperature field10.1016/j.jmrt.2023.11.224 ↗
41. Numerical modeling of annular electromagnetic stirring with intercooling in direct chill casting of 7005 aluminum alloy billet10.1016/j.pnsc.2019.01.007 ↗
42. The formation of AlB2 in an Al-B master alloy10.1016/j.jallcom.2005.04.204 ↗
43. Influence of Mo on microstructure, mechanical properties and intergranular corrosion properties of Al-Mg-Mn alloys10.1016/j.jallcom.2024.176284 ↗
44. Remarkable enhancement of strength and thermal stability of an additively manufactured Al-Mn-Sc-Zr alloy by Fe addition10.1016/j.jallcom.2025.179630 ↗
45. The effects of Cr addition on microstructure, hardness and tensile properties of as-cast Al-3.8wt%Cu-(Cr) alloys10.1016/j.jmrt.2020.04.054 ↗
46. Revisiting the homogenization process in 2024 Al alloy: role of temperatures on phase transformation and mechanical performance10.1016/j.jmst.2025.02.069 ↗
47. Effect of Mn substitution on Cr in the Al-Cu-Er-Mg-Zr-Fe-Si-Ti cast alloy10.1016/j.jallcom.2024.173958 ↗
48. Precipitation behaviour of Al3Zr precipitate in Al–Cu–Zr and Al–Cu–Zr–Ti–V alloys10.1016/S1003-6326(11)61398-8 ↗
49. Effect of Zr additions on thermal stability of Al-Cu precipitates in As-cast and cold worked samples10.3390/met8050331 ↗
50. Al-Cu-Zr (Aluminum-Copper-Zirconium)10.1007/s11669-011-9920-z ↗
51. Variations of microsegregation and second phase fraction of binary Mg-Al alloys with solidification parameters10.1007/s11661-014-2265-6 ↗
52. A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings10.1007/s11661-005-0338-2 ↗
53. A Scheil–Gulliver model dedicated to the solidification of steel10.1016/j.calphad.2015.01.002 ↗
54. Preparation of high purity metals by crystallization methods
55. Effect of solute Si and Cu on grain size of aluminium alloys10.1179/1743133612Y.0000000023 ↗
56. Equiaxed grain structure formation during directional solidification of a refined Al-20wt%Cu alloy: In situ analysis of temperature gradient effects10.1016/j.jcrysgro.2022.126645 ↗
57. Diffusion controlled early-stage L12-D023 transitions within Al3Zr10.1016/j.scriptamat.2023.115460 ↗