journal article·2025-11

Marine inspired design of soil rippers using ship bulbous bow geometries: A cross-disciplinary approach with DEM simulation insights

Egidijus Katinas, Regita Bendikienė, Antanas Čiuplys, Rostislav Chotěborský, Monika Hromasová, Barbora Kuřetová

Particuology· Volume 106
Publisher page

Abstract

Over the past decades, scientists have studied tillage and soil processing technologies based on the classical shapes of agricultural tools. Numerous studies highlight the importance of agricultural tool longevity in relation to abrasive wear resistance and draught force values. However, these studies are typically limited to the most common shapes and types of tools. This paper combines the insights gained from the marine industry's experience in the design of ship's bulbous bows with the challenges of designing soil rippers for agricultural machinery. New shape elements were developed based on the delta, oval, and nabla types of bulbous bows used in ships. Thirteen types of designed elements, along with the original shape, were tested virtually using the Discrete Element Method (DEM). The 3D-printed samples were then tested in a sand bin to measure draught force. DEM simulation parameters were validated by measuring the Static Angle of Repose (SAOR) of sand. The results of this study demonstrate that applying a bulbous bow-inspired shape to the soil ripper can reduce draught force by 7.1 %; however, in some cases, it can also increase the force by 4.1 % compared to the original shape. The values are giving statistically significant differences between the experimental measurements. To fully evaluate the application of these designed elements, further soil disturbance and wear analysis studies should be conducted in future research.
Source: openaire · Quality: candidate unverified · Source record ↗

References (58)

Show source-provided references
1. Calibration of discrete element parameters of crop residues and their interfaces with soil10.1016/j.compag.2021.106349 ↗
2. Review of discrete element method simulations of soil tillage and furrow opening10.3390/agriculture13030541 ↗
3. 2024
4. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
5. Discrete element method study of parameter optimization and particle mixing behaviour in a soil mixer10.1016/j.partic.2022.12.011 ↗
6. Research on discrete element parameter calibration of ore particles based on tavares breakage model in a SAG mill10.1016/j.partic.2024.10.017 ↗
7. Simulating the effect of rake angle on narrow opener performance with the discrete element method10.1016/j.biosystemseng.2018.04.013 ↗
8. Reduction of wear via hardfacing of chisel ploughshare10.1016/j.triboint.2005.06.005 ↗
9. Particle movement in DEM models and artificial neural network for validation by using contrast points10.3390/technologies12120257 ↗
10. Tracing of the rapeseed movement by using the contrast point tracking method for DEM model verification
11. Explorations in statistics : Standard deviations and standard errors10.1152/advan.90123.2008 ↗
12. Wear of blade spreader during powder spreading in additive manufacturing10.1016/j.triboint.2023.108818 ↗
13. Simulation of canola seedling emergence dynamics under different soil compaction levels using the discrete element method (DEM)10.1016/j.still.2022.105461 ↗
14. 3D DEM simulations of monotonic interface behaviour between cohesionless sand and rigid wall of different roughness10.1007/s11440-020-01085-6 ↗
15. Wear simulation and validation of composites (insert-reinforced matrix) in the dry sand rubber wheel test10.1016/j.mineng.2024.108583 ↗
16. Study on the reduction of soil adhesion and tillage force of bionic cutter teeth in secondary soil crushing10.1016/j.biosystemseng.2021.11.018 ↗
17. Measurement and modelling of soil displacement from sweeps with different cutting widths10.1016/j.biosystemseng.2017.06.005 ↗
18. Guyomard · 2020
19. Parameters and contact models for DEM simulations of agricultural granular materials: A review10.1016/j.biosystemseng.2016.02.017 ↗
20. Hoyle
21. Friction and wear the method of hardening soil rippers by surfacing10.3103/S106836661404014X ↗
22. Development and verification of a mathematical model for the specific resistance of a curved subsoiler10.1016/j.biosystemseng.2019.12.004 ↗
23. Experimental analysis of tablet properties for discrete element modeling of an active coating process10.1208/s12249-013-9925-5 ↗
24. Abrasive wear behaviour of 27MnB5 steel used in agricultural tines
25. The bulbous bow shape adaptability for the soil ripper tool
26. Wear modelling of soil ripper tine in sand and sandy clay by discrete element method10.1016/j.biosystemseng.2019.10.022 ↗
27. Sensitivity analysis of the influence of particle dynamic friction, rolling resistance and volume/shear work ratio on wear loss and friction force using DEM model of dry sand rubber wheel test10.1016/j.triboint.2021.106853 ↗
28. Durability and wear geometry of subsoiler shanks provided with sintered carbide plates10.1016/j.triboint.2016.08.020 ↗
29. Design of bulbous bows
30. DEM modelling of tillage tools in sand and verification of draft forces in the soil box
31. Modeling of soil–claw interaction using the discrete element method (DEM)10.1016/j.still.2015.12.010 ↗
32. Combining simulations and field experiments: Effects of subsoiling angle and tillage depth on soil structure and energy requirements10.1016/j.compag.2023.108323 ↗
33. Hull form optimization based on calm-water wave drag with or without generating bulbous bow10.1016/j.apor.2021.102861 ↗
34. Wear study on flexible brush-type soil removal component for removing soil used to protect grapevines against cold10.1016/j.biosystemseng.2023.03.001 ↗
35. Prediction of cutting forces and soil behavior with discrete element simulation10.1016/j.compag.2020.105848 ↗
36. Effect of nano coating materials on reduction of soil adhesion and external friction10.1016/j.still.2019.05.026 ↗
37. Influence of local soil conditions on mouldboard ploughshare abrasive wear10.1016/j.triboint.2007.06.002 ↗
38. Material characterization and inter/intra-particle validation for DEM simulation of urea coating process10.1016/j.partic.2023.09.010 ↗
39. Scalability of angle of repose tests for the calibration of DEM parameters
40. Evaluation of the performance of very narrow tines with different geometrical structures for tilling natural grassland10.1016/j.biosystemseng.2022.09.011 ↗
41. Energy use and carbon emission of conventional and organic sugar beet farming10.1016/j.jclepro.2018.08.077 ↗
42. Modelling of abrasive material loss at soil tillage via scratch test with the discrete element method10.1016/j.jterra.2020.08.002 ↗
43. Estimating stresses and movement work of a soil-cultivator tip using the finite-element method10.3103/S1068366616050172 ↗
44. Study on plowing performance of EDEM low-resistance animal bionic device based on red soil10.1016/j.still.2019.104336 ↗
45. Optimal design method of bulbous bow for fishing vessels10.1016/j.ijnaoe.2021.10.006 ↗
46. 3D DEM tillage simulation: Validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil10.1016/j.still.2013.10.003 ↗
47. Viscosity, granular-temperature, and stress calculations for shearing assemblies of inelastic, frictional disks10.1122/1.549893 ↗
48. Field experiments evaluating a biomimetic shark-inspired (BioS) subsoiler for tillage resistance reduction10.1016/j.still.2019.104432 ↗
49. DEM and soil bin study on a biomimetic disc furrow opener10.1016/j.compag.2018.11.023 ↗
50. Methods for reducing the tillage force of subsoiling tools: A review10.1016/j.still.2023.105676 ↗
51. Rolling friction as a technique for modelling particle shape in DEM10.1016/j.powtec.2011.10.057 ↗
52. Investigation of the effect of filling level on the wear and vibration of a SAG mill by DEM10.1016/j.partic.2021.04.009 ↗
53. Biomimetic design of soil-engaging components: A review10.3390/biomimetics9060358 ↗
54. Effect of drum structure on particle mixing behavior based on DEM method10.1016/j.partic.2022.05.008 ↗
55. Field wear tests of ploughshares in the southern Xinjiang region10.1016/j.engfailanal.2024.108522 ↗
56. A compacting device of rice dry direct-seeding planter based on DEM-MFBD coupling simulation significantly improves the seedbed uniformity and seedling emergence rate10.1016/j.biosystemseng.2024.07.018 ↗
57. Optimization design and performance study of a subsoiler underlying the tea garden subsoiling mechanism based on bionics and EDEM10.1016/j.still.2022.105375 ↗
58. A discrete element method model and experimental verification for wheat root systems10.1016/j.biosystemseng.2024.06.004 ↗