La3+ doped H1.6Mn1.6O4 lithium-ion sieve for Li+ efficient adsorption and analysing anti-dissolution loss mechanism
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (54)
Show source-provided references
1. Synthesis and adsorption properties of metal oxide-coated lithium ion-sieve from salt Lake brine10.1016/j.desal.2022.116196 ↗
2. Preparation of Mg-doped Li1.6Mn1.6O4 with enhanced Li+ adsorption performance and anti-dissolution properties of Mn10.1016/j.hydromet.2021.105772 ↗
3. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
4. Enhanced Li+ adsorption by magnetically recyclable iron-doped lithium manganese oxide ion-sieve: Synthesis, characterization, adsorption kinetics and isotherm10.1016/j.jmrt.2021.04.073 ↗
5. Lithium-desorption mechanism in LiMn2O4, Li1.33Mn1.67O4, and Li1.6Mn1.6O4 according to precisely controlled acid treatment and density functional theory calculations10.1039/C9TA06080D ↗
6. The mechanism of manganese dissolution on Li1.6Mn1.6O4 ion sieves with HCl10.1039/C8DT00033F ↗
7. Al and Cr ions co-doped spinel manganese lithium ion-sieve with enhanced Li+ adsorption performance and structural stability10.1016/j.micromeso.2023.112492 ↗
8. Eliminating the effect of pH: Dual-matrix modulation adsorbent enables efficient lithium extraction from concentrated seawater10.1016/j.watres.2024.122571 ↗
9. Improved adsorption performance and magnetic recovery capability of Al–Fe co-doped lithium ion sieves10.1039/D2NJ03217A ↗
10. Microenvironment-modulating adsorption enables highly efficient lithium extraction under natural pH conditions10.1021/acsnano.3c12978 ↗
11. Enhanced performance of Li+ adsorption for H1.6Mn1.6O4 ion-sieves modified by Co doping and micro array morphology10.1016/j.ceramint.2021.04.194 ↗
12. NMR and FT-IR investigation of spinel LiMn2O4 cathode prepared by the tartaric acid gel process10.1006/jssc.2001.9242 ↗
13. Preparation of tungsten-doped Ti-based lithium ion sieves with excellent adsorption performance by hydrothermal method10.1016/j.jallcom.2024.176058 ↗
14. Lithium recovery from oil and gas produced water: A need for a growing energy industry10.1021/acsenergylett.9b00779 ↗
15. Selective lithium leaching from spent Li(MnyFe1-y)PO4 cathodes with gradient in-situ-oxidation of Na2S2O810.1016/j.partic.2025.04.015 ↗
16. Surface modification of spinel λ-MnO2 and its lithium adsorption properties from spent lithium ion batteries10.1016/j.apsusc.2014.07.090 ↗
17. Adsorption of pyrene onto the agricultural by-product: Corncob10.1007/s00128-015-1687-1 ↗
18. Design and adsorption performance of hollow structure nano-metatitanic acid lithium ion sieve with strong structure stability and large adsorption capacity10.1016/j.colsurfa.2024.133960 ↗
19. Preparation, characterization, and adsorption performance of H2TiO3 lithium ion sieves with homogeneous nanoparticles: Kinetics, thermodynamics, and mechanism analysis10.1002/slct.202402440 ↗
20. Microwave-assisted hydrothermal synthesis of lithium ion-sieve for adsorption of lithium ion in coal gangue leaching solution10.1016/j.colsurfa.2023.132819 ↗
21. Integrated separation of precipitation and three-liquid-phase extraction for boron, lithium and magnesium from salt lake brine with high magnesium-lithium ratio10.1016/j.seppur.2024.127541 ↗
22. Challenges and opportunities of recovering lithium from seawater, produced water, geothermal brines, and salt lakes using conventional and emerging technologies10.1016/j.cej.2024.155349 ↗
23. Poly (ethylene imine)-mediated dihydroxy-functionalized resin with enhanced adsorption capacity for the extraction of boron from salt lake brine10.1016/j.jece.2024.113779 ↗
24. Recent advances in nanomaterial development for lithium ion-sieving technologies10.1016/j.desal.2022.115624 ↗
25. Lithium sorption properties of HMnO in seawater and wastewater10.1016/j.watres.2015.09.032 ↗
26. Interface and defect engineering enable fast and high-efficiency Li extraction of metatitanic acid adsorbent10.1016/j.cej.2021.130550 ↗
27. Enabling highly structure stability and adsorption performances of Li1.6Mn1.6O4 by Al-gradient surface doping10.1016/j.seppur.2021.118433 ↗
28. K-gradient doping to stabilize the spinel structure of Li1.6Mn1.6O4 for Li+ recovery10.1039/D0DT02405H ↗
29. Trace doping by fluoride and sulfur to enhance adsorption capacity of manganese oxides for lithium recovery10.1016/j.matdes.2020.108867 ↗
30. Surface trace doping of Na enhancing structure stability and adsorption properties of Li1.6Mn1.6O4 for Li+ recovery10.1016/j.seppur.2020.117583 ↗
31. Li4Mn5O12 doped cellulose acetate membrane with low Mn loss and high stability for enhancing lithium extraction from seawater10.1016/j.desal.2021.115003 ↗
32. Synthesis and properties of Li1. 6Mn1.6O4 and its adsorption application10.1016/j.hydromet.2011.09.004 ↗
33. Enhancing adsorption capacity and structural stability of Li1.6Mn1.6O4 adsorbents by anion/cation co-doping, Rsc
34. Global lithium flow 1994-2015: Implications for improving resource efficiency and security10.1021/acs.est.7b06092 ↗
35. Lithium extraction/insertion process on cubic Li-Mn-O precursors with different Li/Mn ratio and morphology10.1007/s10450-011-9356-0 ↗
36. Recovery and recycling of lithium: A review10.1016/j.seppur.2016.08.031 ↗
37. Regulation of morphology evolution and Mn dissolution for ultra-long cycled spinel LiMn2O4 cathode materials by B-doping10.1016/j.jpowsour.2022.231073 ↗
38. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
39. Ti surface-doped spinel lithium manganese oxide with porous structure and improved stability for Li extraction from salt-lake brine10.1016/j.cej.2024.158533 ↗
40. La3+ doped H1.6Mn1.6O4 lithium-ion sieve for Li+ efficient adsorption and analysing anti-dissolution loss mechanism10.1016/j.partic.2025.09.005 ↗
41. Highly positively-charged membrane enabled by a competitive reaction for efficient Li+/Mg2+ separation10.1016/j.seppur.2023.125428 ↗
42. Thermodynamic stability of low-and high-index spinel LiMn2O4 surface terminations10.1021/acsami.6b01069 ↗
43. Extraction of lithium with functionalized lithium ion-sieves10.1016/j.pmatsci.2016.09.004 ↗
44. Atomic insights into Ti doping on the stability enhancement of truncated octahedron LiMn2O4 nanoparticles10.3390/nano11020508 ↗
45. Accelerating adsorption capacity and structural stability of Li1.6Mn1.6O4-type adsorbents via synergetic effect of in-situ configured Li2MnO3 layer10.1016/j.cej.2024.153330 ↗
46. Al and F ions co-modified Li1.6Mn1.6O4 with obviously enhanced Li+ adsorption performances
47. Equilibrium and kinetics studies of fluoride ions adsorption on CeO2/Al2O3 composites pretreated with non-thermal plasma10.1016/j.cej.2011.01.054 ↗
48. Dielectric SrTiO3 mesocrystal derived from a H2Ti4O9·H2O single crystal10.1016/j.inoche.2020.107840 ↗
49. Solar-driven membrane separation for direct lithium extraction from artificial salt-lake brine10.1038/s41467-023-44625-w ↗
50. Facets regulation of Li1.6Mn1.6O4 by B-doping to enable high stability and adsorption capacity for lithium extraction10.1016/j.seppur.2024.127739 ↗
51. Adsorbents for lithium extraction from salt lake brine with high magnesium/lithium ratio: From structure-performance relationship to industrial applications
52. Effects of cell configuration and bipolar membrane on preparation of LiOH through bipolar membrane electrodialysis from salt lake brine10.1016/j.seppur.2024.127875 ↗
53. A novel Co-doped H2TiO3 spinning composite for efficient lithium recovery from alkaline lithium precipitation mother liquor10.1016/j.cej.2024.148989 ↗
54. Lithium extraction from salt lake brines with high magnesium/lithium ratio: A review10.1007/s10311-023-01571-9 ↗