journal article·2025-11

CFD-DEM-SPM modeling of permeability and pressure drop in cohesive zones of heterogeneous alternating layer beds for low-carbon blast furnace ironmaking

Qiang Li, Yu Jiang, Jiayun Dan, Suwei Ma

Particuology· Volume 106
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (44)

Show source-provided references
1. Assessment of rolling resistance models in discrete element simulations10.1016/j.powtec.2010.09.030 ↗
2. Perspectives on low-temperature electrolysis and potential for renewable hydrogen at scale10.1146/annurev-chembioeng-060718-030241 ↗
3. Modeling and analysis of dilute phase pneumatic conveying of fine particles10.1016/j.powtec.2013.08.014 ↗
4. Model for collisions in granular gases10.1103/PhysRevE.53.5382 ↗
5. Melt down behaviour of a fused layer in the blast furnace cohesive zone10.2355/isijinternational.43.304 ↗
6. A discrete numerical mode for granular assemblies10.1680/geot.1979.29.1.47 ↗
7. Particle-scale study of coke combustion in the raceway of an ironmaking blast furnace
8. Numerical investigation of the impact of injecting coke oven gas on raceway evolution in an ironmaking blast furnace
9. Effect of nut coke addition on physicochemical behaviour of pellet bed in ironmaking blast furnace10.2355/isijinternational.ISIJINT-2018-580 ↗
10. DEM-based virtual experimental blast furnace: A quasi-steady state model10.1016/j.powtec.2016.12.017 ↗
11. A process scaling approach for CFD-DEM modelling of thermochemical behaviours in moving bed reactors10.1016/j.fuproc.2020.106369 ↗
12. A process scaling approach for CFD-DEM modelling of thermochemical behaviours in moving bed reactors10.1016/j.fuproc.2020.106369 ↗
13. Evaluating the effect of coke layer thickness on permeability by pressure drop estimating model10.2355/tetsutohagane.TETSU-2015-048 ↗
14. Rolling resistance at contacts in simulation of shear band development by DEM10.1061/(ASCE)0733-9399(1998)124:3(285) ↗
15. Color-PTV measurement and CFD-DEM simulation of the dynamics of poly-disperse particle systems in a pseudo-2D fluidized bed10.1016/j.ces.2018.01.013 ↗
16. Formation of the melting zone in blast furnace
17. Mixed burden softening and melting phenomena in blast furnace operation part 1 — X-ray observation of ferrous burden10.1179/174328106X118107 ↗
18. Computational investigation of horizontal slug flow in pneumatic conveying10.1021/ie070991q ↗
19. Application of periodic boundary condition to CFD-DEM simulation of gas-solid flow in pneumatic conveying10.1016/j.ces.2013.01.055 ↗
20. Gas solid flow and energy dissipation in inclined pneumatic conveying10.1021/ie301894d ↗
21. DEM-CFD model considering softening behavior of ore particles in cohesive zone and gas flow analysis at low coke rate in blast furnace10.2355/isijinternational.52.1010 ↗
22. The effect of metal dissolution on carbon production by high-temperature molten salt electrolysis10.1016/j.jcou.2023.102390 ↗
23. Validation and calibration approach for discrete element simulation of burden charging in pre-reduction shaft furnace of COREX process10.2355/isijinternational.53.1365 ↗
24. Numerical study of horizontal pneumatic conveying: Effect of material properties10.1016/j.powtec.2013.10.013 ↗
25. A coupled LES-LBM-IMB-DEM modeling for evaluating pressure drop of a heterogeneous alternating-layer packed bed
26. Evaluation of coke mixed charging based on packed bed structure and gas permeability changes in blast furnace by DEM-CFD model10.2355/isijinternational.52.1990 ↗
27. Validation study on a scaling law model of the DEM in industrial gas-solid flows10.1016/j.powtec.2018.11.015 ↗
28. Blast furnace burden softening and melting phenomena: Part I. Pellet bulk interaction observation10.1007/s11663-004-0077-6 ↗
29. Study on couple stress and shear band development in granular media based on numerical simulation analyses10.1016/S0020-7225(99)00132-9 ↗
30. Two-fluid modeling of turbulent particle-gas suspensions in vertical pipes10.1016/j.powtec.2014.05.048 ↗
31. Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes10.1016/j.ces.2003.09.037 ↗
32. An improved integral non-linear model for the contact of particles in distinct element simulations10.1016/j.ces.2004.10.004 ↗
33. Contact law effects on wave propagation in particulate materials using distinct element modeling10.1016/0020-7462(93)90061-O ↗
34. Verification and validation of a coarse grain model of the DEM in a bubbling fluidized bed10.1016/j.cej.2014.01.029 ↗
35. Coarse grain 3D CFD-DEM simulation and validation with capacitance probe measurements in a circulating fluidized bed10.1016/j.ces.2018.11.052 ↗
36. A theoretical model for the stick/bounce behaviour of adhesive, elastic-plastic spheres10.1016/S0032-5910(98)00099-0 ↗
37. Viscosity, Granular-temperature, and stress calculations for shearing assemblies of inelastic, frictional disks10.1122/1.549893 ↗
38. New evaluation methods discussion of softening-melting and dropping characteristic of BF iron bearing burden10.1002/srin.201300061 ↗
39. A new approach for studying softening and melting behavior of particles in a blast furnace cohesive zone10.1007/s11663-014-0223-8 ↗
40. Particle scale simulation of softening-melting behaviour of multiple layers of particles in a blast furnace cohesive zone10.1016/j.powtec.2015.04.002 ↗
41. Effect of Al2O3 on the gas-based direct reduction behavior of Hongge vanadium titanomagnetite pellet under simulated shaft furnace atmosphere10.1016/j.powtec.2020.08.043 ↗
42. Investigation on vertical plug formation of coarse particles in a non-mechanical feeder by CFD-DEM coupling method10.1016/j.powtec.2018.03.055 ↗
43. Discrete particle simulation of particulate systems: Theoretical developments10.1016/j.ces.2006.12.089 ↗
44. Discrete particle simulation of particulate systems: A review of major applications and findings10.1016/j.ces.2008.08.006 ↗