journal article·2026-07

Hydraulic transport of coarse particles in a slurry shield circulation system with swirl induction pipes: A CFD-DEM study

Guozhen Li, Zheng Wang, Nicholas J. Miles, Philip Hall

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (40)

Show source-provided references
1. Micromechanics of material detachment during adhesive wear: A numerical assessment of Archard's wear model10.1016/j.wear.2021.203739 ↗
2. ANSYS. (2021). ANSYS Fluent Theory Guide. In. Canonsburg, PA, USA: ANSYS, Inc.
3. Abrasion erosion modeling in particulate flow10.1016/j.wear.2017.01.042 ↗
4. Contact and Rubbing of Flat Surfaces10.1063/1.1721448 ↗
5. Ariyaratne, C. (2005). Design and Optimisation of Swirl Pipes and Transition Geometries for Slurry Transport. University of Nottingham, Nottingham.
6. A discrete numerical model for granular assemblies10.1680/geot.1979.29.1.47 ↗
7. Critical sand deposition velocity for gas-liquid stratified flow in horizontal pipes10.1016/j.jngse.2016.05.008 ↗
8. Innovative pipe wall design to mitigate elbow erosion: A CFD analysis10.1016/j.wear.2017.03.015 ↗
9. Failure analysis of slurry TBM discharge pipe in complex strata combined with wear and vibration characteristics10.1016/j.engfailanal.2023.107307 ↗
10. Fokeer, S. (2006). An Investigation of Geometrically Induced Swirl Applied to Lean Phase Pneumatic Flows. University of Nottingham, Nottingham.
11. Turbulence modeling effects on the CFD predictions of flow over a NASCAR Gen 6 racecar10.1016/j.jweia.2018.03.016 ↗
12. Führböter, A. (1961). Über die Förderung von Sand-Wasser-Gemischen in Rohrleitungen. Unpublished PhD.
13. The archard design calculation model and its application methods
14. Case study on jaw crusher rock breaking for slurry TBM using Tavares UFRJ breakage model and coupled CFD-DEM10.1016/j.undsp.2026.03.009 ↗
15. Near-wall flow characteristics in pipe bend dense slurries: Optimizing the maximum sliding frictional power10.1016/j.ijsrc.2024.04.002 ↗
16. Developments in Slurry Pipeline Technologies
17. Numerical analysis of slurry penetration and filter cake formation in front of tunnel face10.1016/j.tust.2023.105303 ↗
18. Numerical study of wall erosion using energy approach for the flow of dense slurry in 90o horizontal pipe bend10.1016/j.powtec.2023.118623 ↗
19. Optimizing pressure drop in 90° bend horizontal pipelines for dense slurry flow: A response surface methodology approach10.1177/09544089241271765 ↗
20. Large eddy simulation and Reynolds-averaged Navier–Stokes based modelling of geometrically induced swirl flows applied for the better understanding of Clean-In-Place procedures10.1016/j.fbp.2017.05.001 ↗
21. Analysis on Slurry Transportation Characteristics and Wear of Spiral Pipe Based on CFD-DEM Coupling
22. Analytical study and field investigation on the effects of clogging in slurry shield tunneling10.1016/j.tust.2022.104957 ↗
23. Miedema, S. (2016). Slurry Transport: Fundamentals, a Historical Overview and The Delft Head Loss & Limit Deposit Velocity Framework.
24. An investigation of particle trajectories in two-phase flow systems10.1017/S0022112072001806 ↗
25. Peker, S. M., Helvacı, Ş. Ş., Yener, H. B., İkizler, B., & Alparslan, A. (2008). 6 - Flow of Settling Slurries. In Solid-Liquid Two Phase Flow (pp. 329-383). Amsterdam: Elsevier.10.1016/B978-044452237-5.50008-4 ↗
26. Numerical investigation of zinc tailings slurry flow field in a horizontal pipeline
27. Enhanced slurry transport efficiency and energy reduction through swirl-inducing pipes10.1016/j.powtec.2024.120441 ↗
28. Schoesser, B., Straesser, M., & Thewes, M. (2019). Design of the support medium for Slurry Pressure Balance (SPB) shield tunnelling in demanding ground conditions. In Tunnels and Underground Cities. Engineering and Innovation Meet Archaeology, Architecture and Art (pp. 3060-3069): CRC Press.10.1201/9780429424441-324 ↗
29. A New k–ε Eddy-Viscosity Model for High Reynolds Number Turbulent Flows10.1016/0045-7930(94)00032-T ↗
30. The rate of decay of swirl in turbulent pipe flow10.1016/S0955-5986(98)00016-8 ↗
31. Steward, N. R. (1988). The wear of materials in hydraulic transport pipelines. In.
32. Study of hydraulic transport characteristics and erosion wear of twisted four-lobed pipe based on CFD-DEM10.1016/j.partic.2024.10.011 ↗
33. Analyze of pipeline transport characteristics and optimization method of structural parameters in slurry shield circulation system with spiral structure10.1016/j.powtec.2024.120001 ↗
34. CFD-DEM coupled calculation of wall wear characteristics during particles flow impacting the wall process10.1016/j.powtec.2023.118684 ↗
35. Theoretical analysis of computational fluid dynamics-discrete element method mathematical model solution change with varying computational cell size10.1115/1.4042956 ↗
36. On the determination of grid size/smoothing distance in un−/semi-resolved CFD-DEM simulation of particulate flows10.1016/j.powtec.2021.08.044 ↗
37. Upstream swirl-induction for reduction of erosion damage from slurries in pipeline bends10.1016/S0043-1648(01)00715-3 ↗
38. Bionic pipeline transport characteristics with transverse protuberances in slurry shield circulation system based on CFD-DEM10.1016/j.powtec.2023.119133 ↗
39. CFD simulation of swirling flow induced by twist vanes in a rod bundle10.1016/j.nucengdes.2018.08.003 ↗
40. Numerical investigation of pipeline transport characteristics of slurry shield under gravel stratum10.1016/j.tust.2017.08.011 ↗