journal article·2010-11

Mechanical properties of bulk metallic glasses

Morgana Martin Trexler, Naresh N. Thadhani

Progress in Materials Science· Volume 55· Issue 8
Publisher page

Abstract

Abstract The mechanical properties of bulk metallic glasses, including their superior strength and hardness, and excellent corrosion and wear resistance, combined with their general inability to undergo homogeneous plastic deformation have been a subject of fascination for scientists and engineers. The scientific interest stems from the unconventional deformation and failure initiation mechanisms in this class of materials in which the typical carriers of plastic flow (dislocations) are absent. Metallic glasses undergo highly localized, heterogeneous deformation by formation of shear bands, a particular mode of deformation of interest for certain applications, but which also causes them to fail catastrophically due to uninhibited shear band propagation. Varying degrees of brittle and plastic failure creating intricate fracture patterns are observed in metallic glasses, quite different from those observed in crystalline solids. The tension–compression anisotropy, strain-rate sensitivity, thermal stability, stress-induced crystallization and polyamorphism transformations, are some of the attributes that have sparked engineering studies on bulk metallic glasses. Understanding of the glass-forming ability and the deformation and failure mechanisms of bulk metallic glasses, has given insight into alloy compositions and intrinsically-forming or extrinsically-added reinforcement phases for creating composite structures, to attain the combination of high strength, tensile ductility, and fracture toughness needed for use in advanced structural applications. The relative ease of fabricating metallic glasses into bulk forms, combined with their unique mechanical properties, has made these materials attractive options for possible applications in aerospace, naval, sports equipment, luxury goods, armor and anti-armor systems, electronic packaging, and biomedical devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
2. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
3. Mechanical properties of bulk metallic glasses and composites10.1557/jmr.2007.0050 ↗
4. Non-crystalline structure in solidified goldsilicon alloys10.1038/187869b0 ↗
5. Thermodynamic and kinetic aspects of the crystal to glass transformation in metallic materials10.1016/0079-6425(86)90005-8 ↗
6. Formation of an amorphous metallic hydride by reaction of hydrogen with crystalline intermetallic compounds – a new method of synthesizing metallic glasses10.1063/1.93901 ↗
7. Hydrogen absorption in CeFe2 and ThFe310.1016/0038-1098(77)90413-6 ↗
8. Tungsten solution kinetics and amorphization in mechanically alloyed Ni–W alloys10.1016/0956-7151(93)90348-V ↗
9. Formation of an amorphous alloy by solid-state reaction of the pure polycrystalline metals10.1103/PhysRevLett.51.415 ↗
10. Mechanical properties of tungsten and steel fiber reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 metallic glass matrix composites10.1016/S1359-6454(98)00275-4 ↗
11. A highly processable metallic glass Zr41.2Ti13.8Cu12.5Ni10Be22.510.1063/1.110520 ↗
12. High-strength Zr-based bulk amorphous alloys containing nanocrystalline and quasicrystalline particles10.1016/S1468-6996(00)00009-7 ↗
13. Bulk formation of metallic glass: Pd40Ni40P2010.1063/1.93645 ↗
14. Formation of bulk metallic glass by fluxing10.1063/1.95330 ↗
15. The case for bulk metallic glass10.1016/S1369-7021(04)00124-5 ↗
16. Test environments and mechanical properties of Zr-base bulk amorphous alloys10.1007/s11661-998-0004-6 ↗
17. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
18. Containerless processing in the study of metallic melts and their solidification10.1179/095066093790326267 ↗
19. Designing metallic glassmatrix composites with high toughness adn tensile ductility10.1038/nature06598 ↗
20. Deformation and failure of Zr57Nb5Al10Cu15.4Ni12.6-W particle composites under quasi-static and dynamic compression10.1007/s11661-004-0180-y ↗
21. Mechanical properties of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix particulate composites10.1557/JMR.1999.0445 ↗
22. Processing, microstructure and properties of ductile metal particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites10.1016/S1359-6454(02)00113-1 ↗
23. Microstructures and mechanical properties of tungsten wire/particle reinforced Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix composites10.1063/1.1459766 ↗
24. Quasistatic and dynamic deformation of tungsten reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass matrix composites10.1016/S1359-6462(01)01134-4 ↗
25. Synthesis and characterization of particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites10.1016/S1359-6454(99)00103-2 ↗
26. Geometry of the structure of monatomic liquids10.1038/185068a0 ↗
27. Condensed-matter science: five-fold symmetry in liquids10.1038/35048652 ↗
28. A structural model for metallic glasses10.1038/nmat1219 ↗
29. Concerning reconstructive transformation and formation of metallic glass10.1063/1.1730566 ↗
30. In situ study of formation and growth of shear bands and microcracks in bulk metallic glasses10.1016/S0921-5093(03)00036-4 ↗
31. The Mohr–Coulomb criterion from unit shear processes in metallic glass10.1016/j.intermet.2004.07.001 ↗
32. Compressive deformation of amorphous Pd40Ni40P2010.1016/0001-6160(89)90228-9 ↗
33. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
34. Plastic flow and fracture of metallic glass10.1007/BF02642754 ↗
35. Deformation-induced nanocrystal formation in shear bands of amorphous alloys10.1038/367541a0 ↗
36. Localized heating during serrated plastic flow in bulk metallic glasses10.1016/S0921-5093(01)01066-8 ↗
37. The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5: a high-resolution transmission electron microscopy study10.1016/S1359-6454(03)00229-5 ↗
38. Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature10.1126/science.1067453 ↗
39. P. Wesseling, P. Lowhahphandu, J. Lewandowski, Effects of superimposed pressure on flow and fracture of two bulk amorphous metals, in: T. Egami, A. Greer, A. Inoue, S. Ranganathan (Eds.), MRS Symposium Proceedings – Supercooled Liquids, Glass Transition, and Bulk Metallic Glasses, vol. 754, Warrendale, PA, 2003, pp. 275–280.10.1557/PROC-754-CC11.10 ↗
40. Nanometer-scale defects in shear bands in a metallic glass10.1080/01418610208240056 ↗
41. The structure of shear bands in metallic glasses10.1016/0001-6160(81)90177-2 ↗
42. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti310.1016/S1359-6454(02)00521-9 ↗
43. J. Lu, Mechanical Behavior of a Bulk Metallic Glass and Its Composite over a Wide Range of Strain Rates and Temperatures, Ph.D. Thesis, California Institute of Technology, 2002.
44. From simulation to theory in the physics of deformation and fracture10.1557/mrs2000.72 ↗
45. Inealstic deformation and fracture of glassy solids
46. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
47. Strain localization in amorphous metals10.1016/0001-6160(82)90225-5 ↗
48. Kinetics of irreversible structural relaxation and homogeneous plastic flow of metallic glasses10.1002/(SICI)1521-396X(200001)177:1<173::AID-PSSA173>3.0.CO;2-X ↗
49. A universal criterion for plastic yileding of metallic glasses with a (T/Tg)2/3 temperature dependence10.1103/PhysRevLett.95.195501 ↗
50. Gilman · Journal of Applied Physics · 1973 · 44 · 67510.1063/1.1662243 ↗
51. J. Li, Metallic Glasses, ASM, 1978 (Chapter 9: Micromechanisms of deformation and fracture).
52. Deformation behavior of the Zr41.2Ti31.8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures10.1016/S1359-6454(03)00164-2 ↗
53. Plastic flow and fracture in Pd80Si20 near Tg10.1016/0025-5416(79)90033-8 ↗
54. A Yield Criterion for Pd40Ni40P20 metallic glass10.1016/0001-6160(89)90228-9 ↗
55. Behavior of multiple shear bands in Zr-based bulk metallic glass10.1016/j.matchemphys.2005.03.011 ↗
56. Some mechanical properties of phase separated Pd0.74Au0.08Si0.38 metallic glasses10.1016/0001-6160(75)90101-7 ↗
57. Fracture topography of metallic glasses10.1007/BF00761791 ↗
58. Mechanism for the flow and fracture of metallic glasses10.1016/0036-9748(74)90070-2 ↗
59. Mechanism for the flow and fracture of metallic glasses10.1098/rspa.1958.0085 ↗
60. Basic mechanical behaviors and mechanics of shear banding in BMGs10.1016/j.ijimpeng.2007.10.007 ↗
61. Atomic scale characterization of shear bands in an amorphous metal10.1063/1.2212059 ↗
62. On the origin of shear banding in metallic glasses10.1016/j.jmps.2009.04.008 ↗
63. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗
64. Local temperature rises during mechanical testing of metallic glasses10.1557/jmr.2007.0068 ↗
65. Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage10.1080/14786430701864753 ↗
66. The dynamic compressive behavior of beryllium bearing bulk metallic glass10.1557/JMR.1996.0060 ↗
67. High strain rate induced embrittlement of Zr-based bulk metallic glass
68. Characterization of uniaxial compressive response of bulk amorphous Zr–Ti–Cu–Ni–Be alloy10.1016/S0921-5093(01)01768-3 ↗
69. Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass10.1016/S0966-9795(02)00137-1 ↗
70. Dynamic compression of a zirconium-based bulk metallic glass confined by a stainless steel sleeve10.1016/j.scriptamat.2008.05.045 ↗
71. Deformation and fracture of an amorphous metallic alloy at high pressure10.1007/BF00543690 ↗
72. Spall strength and Hugoniot elastic limit of a Zr-based bulk metallic glass under planar compression10.1557/jmr.2007.0053 ↗
73. F. Yuan, V. Prakash, J. Lewandowski, Pressure effects on the flow stress of a Zr-based bulk metallic glass, in: SEM IX International Congress on Experimental and Applied Mechanics, No. 336, 2008.
74. Effects of annealing and specimen geometry on dynamic compression of a Zr-based bulk metallic glass10.1557/jmr.2007.0042 ↗
75. Design of inserts for split-Hopkinson pressure bar testing of low strain-to-failure materials10.1007/s11340-008-9145-1 ↗
76. Fe- and Co-based bulk glassy alloys with ultrahigh strength of over 4000MPa10.1016/j.intermet.2006.01.038 ↗
77. A nanoindentation study of serrated flow in bulk metallic glasses10.1016/S1359-6454(02)00303-8 ↗
78. L.Q. Xing, T.C. Hufnagel, K.T. Ramesh, Plastic deformation of bulk amorphous alloys, in: International Journal of Impact Engineering, 2001, pp. L11.7.1–L11.7.6.
79. Comprehensive plastic deformation of a bulk metallic glass10.1016/0025-5416(74)90185-2 ↗
80. Study of serrated flow and plastic deformation in metallic glasses through instrumented indentation10.1016/j.intermet.2006.10.010 ↗
81. Temperature, strain and strain rate dependence of serrated flow in bulk metallic glasses10.2320/matertrans.MJ200782 ↗
82. Rate dependence of serrated flow during nanoindentation of a bulk metallic glass10.1557/JMR.2002.0243 ↗
83. Flow serration in a Zr-based bulk metallic glass in compression at low strain rates10.1016/j.intermet.2008.03.007 ↗
84. Effects of superimposed hydrostatic pressure on flow and fracture of a Zr–Ti–Ni–Cu–Be bulk amorphous alloy10.1016/S1359-6462(99)00128-1 ↗
85. Mechanical properties of Teflon at low temperatures10.1016/S0966-9795(99)00137-5 ↗
86. Effects of hydrostatic pressure on the flow and fracture of a bulk amorphous metal10.1080/01418610208240453 ↗
87. Mechanical Behavior of Rapidly Solidified Materials
88. Deformation Mechanisms of the Zr40Ti14Ni10Cu12Be24 Bulk Metallic Glass10.2320/matertrans.42.642 ↗
89. Fracture morphology and quenched-in precipitates induced embrittlement in a Zr-base bulk glass10.2320/matertrans.42.356 ↗
90. Serrated plastic flow in metallic glasses10.1016/0036-9748(79)90070-X ↗
91. Instability of crack propagation in brittle bulk metallic glass10.1016/j.actamat.2008.08.005 ↗
92. Elastic properties of Zr-based bulk metallic glasses studied by resonant ultrasound spectroscopy10.1557/jmr.2007.0040 ↗
93. Intrinsic plasticity or brittleness of metallic glasses10.1080/09500830500080474 ↗
94. Ductile bulk metallic glass10.1103/PhysRevLett.93.255506 ↗
95. hardness and their implications to flow properties of metallic glasses10.1016/0022-3093(75)90018-6 ↗
96. Mechanical properties of iron-based bulk metallic glasses10.1557/jmr.2007.0036 ↗
97. Tough Fe-based bulk metallic glasses10.1063/1.2890489 ↗
98. Fracture toughness and notched toughness of bulk amorphous alloy: Zr–Ti–Ni–Cu–Be10.1016/S1359-6462(98)00102-X ↗
99. Effects of annealing and changes in stress state on fracture toughness of bulk metallic glass10.2320/matertrans.42.633 ↗
100. Mechanisms for fracture and fatigue-crack propogation in a bulk metallic glass10.1007/s11661-999-0173-y ↗