Bi-Criterial Interpretation of Fatigue Crack Growth. Part 1. Investigation of Fatigue Crack Growth in Double-Cantilever Beam Specimens
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (24)
Show source-provided references
1. O. E. Andreikiv, Yu. M. Lapusta, and N. S. Yadzhak, Determination of the residual life of thin-walled structural elements with short cracks, in: Proc. of the VI Int. Sci.-Tech. Conf. “Damage to materials during operation, methods of its diagnosis and prediction” (September 24–27, 2019, Ternopil), TNTU (2019), pp. 139–142. https://elartu.tntu.edu.ua/handle/lib/29000
2. V. T. Troshchenko and L. A. Khamaza, Stages of fatigue failure of metals and alloys, Proc. National Academy of Sciences of Ukraine, No. 10, 56–63 (2018). https://doi.org/10.15407/dopovidi2018.10.05610.15407/dopovidi2018.10.056 ↗
3. G. V. Tsybanyov, Crack initiation and change in the endurance limit in the process of steel fatigue, in: Proc. of the Int. Sci.-Tech. Conf. “Strength and Durability of Modern Materials and Structures” (November 10–11, 2022, Ternopil), FOP Palianytsia V. A. (2022), pp. 103–105.
4. P. C. Paris and F. Erdogan, A critical analysis of crack propagation laws, J Basic Eng-T ASME, 85, No. 4, 528–533 (1963). https://doi.org/10.1115/1.365690010.1115/1.3656900 ↗
5. DSTU 3953-2000. Bars, Rods and Coils of Tool Alloy Steel. General Technical Conditions (GOST 5950-2000) [in Ukrainian]. With the Amendment No. 8-2002), Valid from 2001-07-01, Gosstandart of Ukraine, Kyiv (2001).
6. TU 14-1-1785-76. Hot-Rolled and Forged Bars of Corrosion-Resistant Martensitic-Aging Steel Grade 03Kh9K14N6M3DF (EP921) [in Russian], Reprinted in 2000 with amendments No. 1-12, TsSSM FGUP TsNIIchermet named after I. P. Bardin, Moscow (2000).
7. DSTU ISO 6892-1: 2019. Metal Materials. Tensile Tests. Part 1: Test Method at Room Temperature [in Ukrainian], Valid from 10.05.2019 (to replace DSTU E 10002-1:2006 with the abolition of GOST 1497-84 Metals. Methods of Tensile Testing (ISO 6892-84, CEN 471-88)).
8. ASTM E399-24. Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials, ASTM International, West Conshohocken, PA, USA (2024).
9. V. M. Torop, Experimental unit for determining the fracture-toughness characteristics of materials, Strength Mater, 29, No. 1, 97–101 (1997). https://doi.org/10.1007/BF0276758310.1007/BF02767583 ↗
10. RD 50-245-82. Guidelines. Calculations and Strength Tests. Methods of Mechanical Testing of Metals. Determination of the Characteristics of Crack Resistance (Fracture Toughness) under Cyclic Loading [in Russian], Valid from 01.01.83, Standards Publ., Moscow (1983).
11. Yu. A. Kashtalyan, V. M. Torop, and I. V. Orynyak, Effect of crack length and temperature on the results of measurements of the stress intensity factor on DCB specimens, Strength Mater, 17, No. 11, 1535–1539 (1985). https://doi.org/10.1007/BF0152993810.1007/BF01529938 ↗
12. ASTM E647-15e1. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM International, West Conshohocken, PA, USA (2015).
13. ISO 12108:2018; Metallic Materials-Fatigue Testing-Fatigue Crack Growth Method, ISO, Geneva, Switzerland (2018).
14. J. A. Schönherr, L. Duarte, M. Madia, et al., Robust determination of fatigue crack propagation thresholds from crack growth data, Materials, 15, No. 14, 4737 (2022). https://doi.org/10.3390/ma1514473710.3390/ma15144737 ↗
15. D. Davidson, K. Chan, R. McClung, and S. Hudak, Small Fatigue Cracks, in: I. Milne, R. O. Ritchie, and B. Karihaloo (Eds.), Comprehensive Structural Integrity, Vol. 4, Cp. 4.05, Elsevier Science Ltd. (2003), pp. 129–164. https://doi.org/10.1016/B0-08-043749-4/04073-810.1016/B0-08-043749-4/04073-8 ↗
16. A. Garcia-Gonzalez, J. A. Aguilera, P. M. Cerezo, et al., A literature review of incorporating crack tip plasticity into fatigue crack growth models, Materials, 16, No. 24, 7603 (2023). https://doi.org/10.3390/ma1624760310.3390/ma16247603 ↗
17. K. Tanaka and Y. Akiniwa, Short fatigue-crack growth from crack-like defects under completely reversed loading predicted based on cyclic R-curve, Materials, 17, No. 18, 4484 (2024). https://doi.org/10.3390/ma1718448410.3390/ma17184484 ↗
18. A. Y. Krasovsky, V. N. Krasiko, V. M. Torop, and I. V. Orynyak, Evaluation of the limit load capacity of a body with crack and determination of the temperature of brittle-ductile transition in metals, Strength Mater, 19, 1603–1609 (1987). https://doi.org/10.1007/BF0152311310.1007/BF01523113 ↗
19. V. M. Torop, Modern levels for structural strength assessment and the algorithm for implementation of the risk analysis methodology for the operation of welded metal structures, The Paton Welding J, No. 11, 42–48 (2024). https://doi.org/10.37434/tpwj2024.11.0610.37434/tpwj2024.11.06 ↗
20. V. T. Troshchenko, V. V. Pokrovsky, and A. V. Prokopenko, Crack Resistance of Materials under Cyclic Loading [in Russian], Naukova Dumka, Kiev (1987).
21. R. N. Castillo and T. J. Beker, A fracture mechanics approach to fatique in flake grafhite cast iron, in: S. R. Valluri, D. M. R. Taplin, P. Rama Rao, et al. (Eds.), Advance in Fracture Research: Fracture 84 (Proceedings of the 6th International Conference on Fracture (ICF6), New Delhi, India, 4–10 December 1984, New Dehli), Vol. 3, Pergamon Press (1986), pp. 2057–2064.10.1016/B978-1-4832-8440-8.50207-6 ↗
22. K. Sadananda and S. Sarkar, Modified Kitagawa diagram and transition from crack nucleation to crack propagation, Metall Mater Trans A, 44, No. 3, 1175–1189 (2013).10.1007/s11661-012-1416-x ↗
23. O. M. Romaniv, B. I. Andrusiv, and V. I. Borsukevich, Crack formation at metal fatigue, Fiz-Khim Mekh Mater, No. 1, 3–13 (1998).
24. R. B. Heywood, Designing Against Fatigue of Metals, John Wiley & Sons (1962).