A Computational Fluid Dynamics Modeling and Experimental Study of the Mixing Process for Dispersion of Synthetic Fibers in Wet-Lay Forming
Source abstract
Abstract
In this paper, we present results from a computational fluid dynamics (CFCFD) model for the mixing process used to disperse synthetic fibers in wet-lay process. We used CFCFD software, FLUENTFLUENTFLUENTFLUENTFLUENTFLUENT, together with the MIXSISIM user interface to accurately model the impeller geometry. A multiple reference frame (MRFRF) model and standard k-e turbulence model were used to model the problem. After obtaining a converged solution for the mixing tank with water, a discrete phase model was constructed by injecting spherical particles into the flow. A mixing tank with baffles and a centrally located impeller was used in experiments. PETET fibers (1.5 denier, 6.35 mm, 12.7 mm, and 38.7 mm) at a concentration of 0.01% were mixed in water for the study. In regions behind the baffles, where the model predicted higher concentration of particles, experimental results showed a 34% higher concentration relative to the region in the high turbulence zone near the center. Instantaneous sheets were formed by rapidly dipping and removing a flat wire mesh strainer into the tank at two different locations to assess the state of dispersion in the tank. The sheets were transferred onto a blotting paper and examined under a microscope to count defects. Results show that the number of rope defects was 43% higher in sheets drawn from the region behind the baffles than in the sheets drawn from regions near the center of the tank. Changing baffles from a rectangular to a triangular cross section decreased the number of rope defects, but increased the number of log defects in the sample sheets at the same location. The CFCFD model can be used to optimize mixing tank design for wet lay fiber dispersion. The model provides further insight into the mixing process by predicting the effect of changes in design parameters on dispersion quality.
Source: crossref · Quality: baseline
References (18)
Show source-provided references
1. Triebes, T. and Lau, J., “Nonwoven Fabrics Having I Improved Fiber Twisting and Crimping,” U.S. P Patent 5,695,377 (December 1997).
2. Shin, Y., Son, K., Yoo, D D., et al., “Functional finishing of nonwoven fabrics. I I. Accessibility of surface modified PE PE T spunbond by atmospheric pressure He/O2 plasma treatment,” J. Appl. Polym. Sci. 100(6): 4306(2006).10.1002/app.23825 ↗
3. Lunenschloss, J. and Albrecht, W W., Nonwoven Bonded Fabrics, E Ellis Horwood Limited, Chichester, U.K., 1985, p. 317.
4. Hahm, D D.M., “Polyester [PE T],” in Film Extrusion Manual - Process, Materials, Properties, (T. I I. Butler and E E. W W. V Veazey, E Ed.), TAPPI PRE SS, Atlanta, GA, USA, 1992, Ch. 19G, pp. 527-533.
5. Keith, J.M., “Dispersion of synthetic fiber for wet-lay nonwovens,” Tappi J. 77(6): 207(1994).
6. Shiffler, D D.A., “Characterizing the dispersion kinetics of synthetic fibers in water,” Tappi J. 68(8): 88(1985).
7. Shiffler, D D.A., “Defective Fibers in W Wet-Lay Nonwoven Fabrics,” Tappi J. 71(6): 117(1988).
8. Brandenburg, K.L., “Critical process variables in the white water system that affect glass fiber dispersion,” 1993 Nonwovens Conference Proceedings, TAPPI , pp. 45-49.
9. Shiffler, D D.A., U.S. P Patent 4,713,289 (December 15, 1987).
10. Jansma, R R.H. and Smith, J.H., U.S. P Patent 5,209,823 (May 11, 1993).
11. Hartmann, H., D Derksen, J.J., and V Van den Akker, H.E.A., “Mixing times in a turbulent stirred tank by means of LES,” AIChE J. 52(11): 3696(2006).10.1002/aic.10997 ↗
12. Prat, O.P. and D Ducoste, J.J., “Modeling spatial distribution of floc size in turbulent processes using the quadrature method of moment and computational fluid dynamics,” Chem. Eng. Sci. (61): 75(2006).10.1016/j.ces.2004.11.070 ↗
13. Ford, C., E Ein-Mozaffari, F., Bennington, C.P.J., et al., “Simulation of mixing dynamics in agitated pulp stock chests using CFD,” AIChE J. 52(10): 3562(2006).10.1002/aic.10958 ↗
14. Switzer, L.H. and Klingenberg, D D.J., “Simulations of fiber dispersion in linear flow fields,” Nordic Pulp Paper Res. J. 18(2): 141(2003).10.3183/npprj-2003-18-02-p141-144 ↗
15. Tafreshi, H. V V. and P Pourdeyhimi, B., “Role of baffles on flow fields inside wet-lay mixing tanks and their potential influence on fiber dispersion,” Textile Res. J. 73(7): 575(2003).10.1177/004051750307300703 ↗
16. “Discrete P Phase models,” Fluent User’s Manual, Fluent I Inc., 2005, Ch. 23.
17. Maksimovic, P P., “Next Steps in CFD,” Pumps & Systems (12): 44(2005).10.1016/S0262-1762(05)00503-1 ↗
18. Vaidya, N., P Pourdeyhimi, B., and Shiffler, D D., “The manufacturing of wet-laid hydroentangled glass fiber composites: P Preliminary results,” Intl. Nonwovens J. 12(4): 55(2003).10.1177/1558925003os-1200413 ↗