journal article·2026-07

Impact of Argon Plasma Etching Duration on the Induced Oxidation Process and Physical Properties of Fe3Si Films

Nattakorn Borwornpornmetee, Chanya Noosawat, Thitirat Saenchantha, Thanagorn Khuanpanya, Chonnarong Kaewsai, Kriettisak Srisom, Rungrueang Phatthanakun, Pattanaphong Janphuang, Hideki Nakajima, Boonchoat Paosawatyanyong, Tsuyoshi Yoshitake, Nathaporn Promros

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (71)

Show source-provided references
1. Fabrication of ferromagnetic Fe3Si thin films by pulsed laser deposition using an Fe3Si target10.1016/j.vacuum.2004.01.065 ↗
2. Room-temperature epitaxial growth of ferromagnetic Fe3Si films on Si(111) by facing target direct-current sputtering10.1063/1.1978984 ↗
3. Epitaxial growth of ferromagnetic silicide Fe3Si on Si(111) substrate10.1143/JJAP.45.3598 ↗
4. Physical properties of Fe3Si films coated through facing targets sputtering after microwave plasma treatment10.3390/coatings11080923 ↗
5. Determining the Annealing Temperature Dependency of Wetting and Mechanical Features on Fe3Si Films10.3390/coatings13081328 ↗
6. Wetting state and mechanical property alteration for the Fe3Si films using rapid thermal annealing under various temperatures10.1016/j.heliyon.2023.e22511 ↗
7. Structural and Compositional Reversible Phase Transitions on Low-Index Fe3Si Surfaces10.1209/epl/i2001-00593-6 ↗
8. Epitaxial ferromagnetic Fe3Si/Si(111) structures with high-quality heterointerfaces10.1063/1.2996581 ↗
9. Epitaxial growth of Fe3Si/GaAs(001) hybrid structures10.1063/1.1625426 ↗
10. Temperature‐dependent interlayer coupling in Fe3Si/FeSi2 artificial lattices10.1002/pssa.201330116 ↗
11. Corrosion characteristics of Fe3Si intermetallic coatings prepared by molten salt infiltration in sulfuric acid solution10.1016/j.jallcom.2018.11.198 ↗
12. Facile preparation and tribological property of alloyed Fe3Si coatings on stainless steels surface by molten-salt infiltration method
13. Physical properties of Fe3Si films coated through facing targets sputtering after microwave plasma treatment10.3390/coatings11080923 ↗
14. Determining the Annealing Temperature Dependency of Wetting and Mechanical Features on Fe3Si Films10.3390/coatings13081328 ↗
15. Wetting state and mechanical property alteration for the Fe3Si films using rapid thermal annealing under various temperatures10.1016/j.heliyon.2023.e22511 ↗
16. Plasma nano-modification of poly (ethylene terephthalate) fabric for pigment adhesion enhancement10.1166/jnn.2012.5380 ↗
17. Impact of oxygen and argon plasma exposure on the roughness of gold film surfaces10.1016/j.tsf.2012.06.033 ↗
18. Effect of plasma treatment of titanium surface on biocompatibility10.3390/app9112257 ↗
19. Plasma Cleaning Technology: Mechanisms, Influencing Factors, and Applications10.1109/ACCESS.2025.3532662 ↗
20. A comprehensive review of plasma cleaning processes used in semiconductor packaging10.3390/app15137361 ↗
21. D. Adak, R. Bhattacharyya, Plasma Based Approaches to Achieve Self-Cleaning Surfaces, In Nature-Inspired Self-Cleaning Surfaces in the Nanotechnology Era. IntechOpen (2023). https://doi.org/10.5772/intechopen.112378.10.5772/intechopen.112378 ↗
22. Surface compositional changes in GaAs subjected to argon plasma treatment10.1016/S0169-4332(02)00922-4 ↗
23. Comparison of argon and oxygen plasma treatments for ambient room-temperature wafer-scale au–au bonding using ultrathin au films10.3390/mi10020119 ↗
24. Effect of low-pressure O2 and Ar plasma treatments on the wettability and morphology of biaxial-oriented polypropylene (BOPP) film10.1016/j.porgcoat.2007.07.007 ↗
25. Effect of plasma treatment on hydrophilic properties of TiO2 thin films10.1016/j.surfcoat.2005.04.036 ↗
26. X-ray photoelectron spectroscopy: towards reliable binding energy referencing
27. A step-by-step guide to perform x-ray photoelectron spectroscopy
28. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: Resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
29. Gwyddion: an open-source software for SPM data analysis
30. A. Kramida, Y. Ralchenko, J. Reader, NIST ASD Team, NIST Atomic Spectra Database, ver. 5.12, National Institute of Standards and Technology, Gaithersburg, 2025. https://dx.doi.org/10.18434/T4W30F.
31. Study of optical emission spectroscopy using modified Boltzmann plot in dual-frequency synchronized pulsed capacitively coupled discharges with DC bias at low-pressure in Ar/O2/C4F8 plasma etching process10.1039/D2CP00289B ↗
32. Atmospheric pressure glow discharge (APGD) plasma generation and surface modification of aluminum and silicon Si (100), Dig
33. Physical feature exploration of nanocrystalline FeSi2 surface with argon plasma etching under varying power10.1016/j.vacuum.2023.112588 ↗
34. Surface-wave-sustained argon plasma kinetics from intermediate to atmospheric pressure10.1088/1361-6463/aae34d ↗
35. An XPS and ToF-SIMS study of the passive film formed on a model FeCrNiMo stainless steel surface in aqueous media after thermal pre-oxidation at ultra-low oxygen pressure10.1016/j.apsusc.2021.149435 ↗
36. Surface reaction of polycrystalline Fe3Si alloys with oxygen and water vapor10.1016/S0966-9795(97)00085-X ↗
37. J. F. Moulder, Handbook of X-ray Photoelectron Spectroscopy: A Reference Book of Standard Spectra for Identification and Interpretation of XPS Data, first ed., Physical Electronics, Minnesota, 1995.
38. Core-shell nanocrystalline structures in oxidized iron thin films prepared by sputtering at very low temperatures10.1063/1.2737389 ↗
39. Diamond like carbon films containing Si: structure and nonlinear optical properties10.3390/ma13041003 ↗
40. Significance of interface barrier at electrode of hematite hydroelectric cell for generating ecopower by water splitting10.1002/er.4613 ↗
41. Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds10.1002/sia.1984 ↗
42. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
43. Surface states and reactivity of pyrite and marcasite10.1016/S0169-4332(01)00283-5 ↗
44. X-ray photoelectron spectroscopic study of ordered stoichiometric FeAl fractured in situ10.1016/j.jallcom.2005.05.043 ↗
45. Confirmation of X-ray photoelectron spectroscopy peak attributions of nanoparticulate iron oxides, using symmetric peak component line shapes10.1021/jp100964x ↗
46. Analysis of the Fe 2p XPS for hematite α-Fe2O3: Consequences of covalent bonding and orbital splittings on multiplet splittings10.1063/1.5135595 ↗
47. Electronic structures and chemical bonding in transition metal monosilicides MSi (M=3d, 4d, 5d elements)10.1063/1.2196040 ↗
48. Plasma Cleaning of Metal Surfaces: From Contaminant Removal to Surface Functionalization10.3390/surfaces9010004 ↗
49. Effect of hydrogen on semiconductive properties of passive film on ferrite and austenite phases in a duplex stainless steel10.1038/s41598-017-03480-8 ↗
50. On the Quenching of Electron Temperature in Inductively Coupled Plasma10.3390/ma16083219 ↗
51. Formation and characterization of embedded Fe3Si binary structures in Si10.1063/1.5091541 ↗
52. Pit assisted oxygen chemisorption on GaN surfaces10.1039/C5CP00540J ↗
53. Studies of the oxidation of iron by water vapour using X-ray photoelectron spectroscopy and QUASES10.1016/j.susc.2004.08.035 ↗
54. Characterization of oxidation behavior at Fe-Si alloy surface. ratio
55. Influence of oxygen and argon plasma treatments on the chemical structure and redox state of oxide covered iron10.1016/S0169-4332(98)00617-5 ↗
56. Comparative study between in-plasma and post-plasma chemical processes occurring at the surface of UHMWPE subjected to medium pressure Ar and N2 plasma activation
57. Insight Notes: considerations in the XPS analysis of O1s spectra for metal oxides10.1002/sia.70036 ↗
58. The Limits of X-ray Diffraction Theory10.3390/cryst13030521 ↗
59. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles10.1186/2251-7235-6-6 ↗
60. W. Hoek, A.J.M. Mackus, N.J. Chittock, H.C.M. Knoops, A.M. de Jong, Anisotropic plasma atomic layer etching of Al2O3 and HfO2 using SF6 and Ar plasma, Eindhoven University of Technology (2022).
61. Facing-targets-type sputtering apparatus and method
62. Impact of annealing temperature and carbon doping on the wetting and surface morphology of semiconducting iron disilicide formed via radio frequency magnetron sputtering10.1016/j.tsf.2020.138248 ↗
63. Investigation of morphological surface features, wetting behavior and mechanical traits under various substrate temperatures for beta iron disilicide prepared via facing-targets sputtering10.1016/j.mssp.2022.106604 ↗
64. K. Seo, M. Kim, Re-derivation of Young’s equation, Wenzel equation, and Cassie-Baxter equation based on energy minimization, In Surface energy. InTechOpen (2015). https://doi.org/10.5772/61066.10.5772/61066 ↗
65. Beyond Wenzel and Cassie–Baxter: second-order effects on the wetting of rough surfaces10.1021/la502143v ↗
66. High-Surface-Energy Nanostructured Surface on Low-Modulus Beta Titanium Alloy for Orthopedic Implant Applications10.1007/s11665-021-05769-2 ↗
67. Effects of Build Angle on Additively Manufactured Aluminum Alloy Surface Roughness and Wettability10.1115/1.4053608 ↗
68. Grain Boundaries and Dislocations10.1126/science.1071040 ↗
69. TiN/TiCN multilayer films modified by argon plasma treatment10.1016/j.apsusc.2013.05.058 ↗
70. Surface damage of 6H–SiC originating from argon plasma irradiation10.1016/j.nimb.2013.05.084 ↗
71. Concentration microprofiles in iron silicides induced by low energy Ar+ ion bombardment10.1016/S0168-583X(99)00875-7 ↗