Friction and wear features of WC-Co hard alloy in vacuum towards potential application for lunar deep subsurface drilling
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Application of fine-grained tungsten carbide based cemented carbides10.1016/0263-4368(95)92672-7 ↗
2. WC-based cemented carbide with NiFeCrWMo high-entropy alloy binder as an alternative to cobalt10.1016/j.vacuum.2024.113052 ↗
3. Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools10.1016/j.precisioneng.2011.06.002 ↗
4. Preparation and wear resistance of dual-scale structure cemented carbide spherical teeth10.1016/j.vacuum.2021.110701 ↗
5. Processes involved in the wear of cemented carbide tools10.1016/0043-1648(85)90060-2 ↗
6. Measurement of bit-rock interface temperature and wear rate of the tungsten carbide drill bit during rotary drilling10.1007/s40544-019-0330-2 ↗
7. A review of cemented carbides for rock drilling: an old but still tough challenge in geo-engineering10.1016/j.ijrmhm.2013.01.003 ↗
8. Recent trends in tribological performance of aerospace materials in lunar regolith environment – a critical review10.1016/j.asr.2023.10.039 ↗
9. Ultra-high temperature ceramics for extreme environments10.1038/s41578-023-00619-0 ↗
10. Design and experimental performance verification of a thermal property test-bed for lunar drilling exploration
11. Scratch and grinding behavior of different cemented carbide grades for cutting inserts10.1016/j.jmapro.2025.02.041 ↗
12. A comprehensive review on the cutting and abrasive machining of cemented carbide materials10.1016/j.jmapro.2023.10.042 ↗
13. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
14. Screening of diamond-like carbon coatings in search of a prospective solid lubricant suitable for both atmosphere and high vacuum applications10.1016/j.triboint.2017.04.024 ↗
15. A review on cryogenic treatment of tungsten carbide (WC-Co) tool material10.1080/10426914.2020.1843668 ↗
16. Development and characterization of a large-scale high-vacuum environment simulation device with ten-kilogram-scale micron-sized lunar dust10.1016/j.vacuum.2025.114488 ↗
17. The global surface temperatures of the moon as measured by the diviner lunar radiometer experiment10.1016/j.icarus.2016.08.012 ↗
18. Wear mechanisms of WC-Co drill bit inserts against alumina counterface under dry friction: part 1- WC-Co inserts with homogenous binder phase content10.1016/j.ijrmhm.2014.09.018 ↗
19. Tribological properties of additive manufactured Ti6Al4V against cemented carbide under dry sliding conditions10.1016/j.triboint.2021.107358 ↗
20. Friction and wear behaviour of cemented carbides10.1016/j.wear.2003.12.014 ↗
21. Friction and wear characteristics of WC–Co cemented carbides in dry reciprocating sliding contact10.1016/j.wear.2010.02.029 ↗
22. Impact of Cr3C2/VC addition on the dry sliding friction and wear response of WC–Co cemented carbides10.1016/j.wear.2009.06.013 ↗
23. Effect of cryogenic duration on the tribological properties of sintered polycrystalline c-BN during sliding mating materials in vacuum10.1016/j.ceramint.2024.05.326 ↗
24. Tribological behavior and wear mechanism of pure WC at wide range temperature from 25 to 800 °C in vacuum and air environment10.1016/j.ijrmhm.2017.11.024 ↗
25. Tribological behavior of polycrystalline cubic boron nitride sliding against WC-Co cemented carbide in vacuum conditions10.1007/s11665-023-08119-6 ↗
26. Investigation of phase structure of cobalt and its effect in WC-Co cemented carbides before and after deep cryogenic treatment10.1016/j.ijrmhm.2018.03.010 ↗
27. Influence of deep cryogenic treatment on performance of cemented carbide (WC-Co) inserts during dry end milling of maraging steel10.1016/j.jmapro.2018.11.030 ↗
28. High temperature oxidation and tribological properties of cemented carbide material under different cooling condition10.1016/j.ijrmhm.2022.105937 ↗
29. Effect of ambient temperature on wear of cemented carbide tool material
30. Friction and wear behaviors of WC/Co cemented carbide tool materials with different WC grain sizes at temperatures up to 600°C10.1016/j.ijrmhm.2011.11.003 ↗
31. Oxidation behavior of WC-Co cemented carbide in elevated temperature
32. Effects of WC particle size on sintering behavior and mechanical properties of coarse-grained WC–8Co cemented carbides fabricated by unmilled composite powders10.1016/j.ceramint.2015.07.086 ↗
33. The search for lunar mantle rocks exposed on the surface of the moon10.1038/s41467-021-24626-3 ↗
34. Two-billion-year-old volcanism on the Moon from Chang’e-5 basalts10.1038/s41586-021-04100-2 ↗
35. Tribological behavior of polycrystalline diamond compacts under alternating high and low temperature conditions in vacuum environment10.1016/j.triboint.2024.110404 ↗
36. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
37. Fabrication of a nanocrystalline Ni–Co/CoO functionally graded layer with excellent electrochemical corrosion and tribological performance
38. An enumerative formula for the spherical cap discrepancy10.1016/j.cam.2021.113409 ↗
39. Wen · 2018
40. Estimation of hardness of single-phase metallic alloys10.3390/cryst15020156 ↗
41. Tabor · 1951
42. Bowden · 1950
43. Influence of EDM on the wear characteristics of WC-Co cemented carbide
44. Interfacial junctions and cavitation10.1557/S0883769400047102 ↗
45. Friction and wear behaviors of polycrystalline diamond under Vacuum conditions10.1016/j.ijrmhm.2014.11.008 ↗
46. Vacuum pressure dependence of the tribological behaviors of sintered polycrystalline diamond sliding against silicon nitride10.1016/j.ijrmhm.2016.08.007 ↗
47. Effect of sliding mating materials on Vacuum tribological behaviors of sintered polycrystalline diamond10.1016/j.ijrmhm.2015.07.025 ↗
48. Improved Vacuum tribological properties of sintered polycrystalline diamond compacts treated by high temperature annealing10.1016/j.carbon.2017.09.039 ↗
49. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
50. X-ray photoelectron spectroscopy of thin films10.1038/s43586-023-00225-y ↗
51. XPS study of WC formation process10.1016/0169-4332(86)90097-8 ↗
52. STM and XPS characterisation of vacuum annealed nanocrystalline WO3 films10.1016/j.susc.2007.08.009 ↗
53. Epitaxial growth of Co3O4 on CoO (100)10.1116/1.580310 ↗
54. Friction and wear of diamond in high vacuum10.1038/2011279a0 ↗
55. Rabinowicz · 1965 · vol. 32 · 168
56. Analysis of tool wear of TiAlN coated tool, machined surface morphology and chip during titanium alloy milling10.1016/j.triboint.2024.109751 ↗
57. Surface modification technologies for enhancing the tribological properties of cemented carbides: a review10.1016/j.triboint.2023.108257 ↗
58. An insight into microstructure and machining performance of deep cryogenically treated cemented carbide inserts10.1016/j.jmapro.2020.09.001 ↗
59. The effect of cryogenic treatment on microstructure and properties of WC-Co cemented carbides
60. Wear characteristics of some cemented tungsten carbides in machining particleboard10.1016/S0043-1648(98)00361-5 ↗
61. Abrasion of WC-Co alloys by quartz10.1115/1.3453325 ↗
62. Measurement of particle sizes in opaque bodies