journal article·2025-10

Dual-activation mechanisms for chloride ion solidification in fly ash-slag geopolymer under combined temperature/salt fog

Faping Li, Zheming Yang, Yiyan Lu, Shan Li

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (55)

Show source-provided references
1. Wang li, et al. Reinforcement design and structural performance for the topology optimized 3D printed concrete truss beams10.1016/j.engstruct.2025.120064 ↗
2. Flexural performance of the integrated steel truss reinforced 3D printed concrete beams: experimental and numerical analysis
3. High-strength High-Ductility Engineered/Strain-Hardening geopolymer Composites(EGC/SHGC) incorporating dredged river Sand
4. Failure modes and deformation characteristics of steel reinforced high-strength concrete columns
5. Assessment of mechanical properties and structural morphology of Alkali-Activated mortars with industrial waste Materials10.3390/su13042062 ↗
6. Geopolymer composites for marine application: structural properties and durability10.1016/j.cemconcomp.2024.105647 ↗
7. Research status and application analysis of alkali-activated cementitious materials
8. Research on the strength damage and permeability characteristics of cemented paste backfill under chlorine salt erosion and Dry-Wet Cycles10.3390/min14020177 ↗
9. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
10. Evaluation of durability and microstructure evolution of chloride added Fly ash and Fly ash-GGBS based geopolymer concrete
11. Review on the impact of metakaolin-based geopolymer’s reaction chemistry, nanostructure and factors on its properties10.1016/j.conbuildmat.2023.134760 ↗
12. A comprehensive review on compressive strength and microstructure properties of GGBS-based geopolymer binder systems10.1016/j.conbuildmat.2024.135242 ↗
13. Optimization of alkali-activated binders using natural minerals and industrial waste materials as precursor materials
14. Effect of Na/Al ratio on early strength and microstructural properties of alkali-activated geopolymer for rapid repair applications
15. Experimental study on early strength of admixture-modified concrete
16. Composition design and properties of Fly ash-based geopolymer repair materials. journal of civil
17. Physico-mechanical properties of geopolymer mortars for repair applications: impact of binder to sand ratio10.1016/j.conbuildmat.2023.134721 ↗
18. The influence of sintering temperature on the pore structure of an alkali-activated kaolin-based geopolymer ceramic10.3390/ma15072667 ↗
19. The suitability of photocatalyst precursor materials in geopolymer coating applications: a review10.3390/coatings12091348 ↗
20. Potential applications of geopolymer cement-based composite as self-cleaning coating: a review10.3390/coatings12020133 ↗
21. Chemical distributions of different sodium hydroxide molarities on Fly ash/dolomite-based geopolymer10.3390/ma15176163 ↗
22. Metakaolin/sludge based geopolymer adsorbent on high removal efficiency of Cu2+
23. Chloride penetration of concrete exposed to dry-wet cycle with various dry-wet ratios and temperature10.1016/j.conbuildmat.2023.132883 ↗
24. Electrically induced chloride ion transport in alkali activated slag concretes and the influence of microstructure10.1016/j.cemconres.2013.01.007 ↗
25. Chloride ion transport and service life prediction of aeolian sand concrete under dry-wet cycles10.1515/secm-2022-0188 ↗
26. Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes10.1617/s11527-015-0747-7 ↗
27. Effects of microencapsulated phase change materials on chloride ion transport properties of geopolymers incorporating slag and, metakaolin, and cement-based mortars
28. Effect of multi-walled carbon nanotubes on durability of high-strength slag-based geopolymer10.1016/j.ceramint.2022.12.042 ↗
29. Solidification of chloride ion in alkali-activated slag-red mud10.1016/j.conbuildmat.2024.138838 ↗
30. Effect of MgO, Mg-Al-NO3 LDH and calcined LDH-CO3 on chloride resistance of alkali activated Fly ash and slag blends10.1016/j.conbuildmat.2020.118865 ↗
31. Solidification of chloride ions in alkali-activated slag10.1016/j.conbuildmat.2021.126219 ↗
32. Chloride binding mechanism and free chloride reduction method of alkali-activated slag/Fly ash mixed with seawater10.1016/j.conbuildmat.2023.134079 ↗
33. Influence of the slag content on the chloride and sulfuric acid resistances of alkali-activated Fly ash/slag paste10.1016/j.cemconcomp.2016.06.004 ↗
34. Effect of mix proportion parameters on chloride erosion resistance of Fly ash/slag-based engineered geopolymer composites
35. Geopolymer concrete durability subjected to aggressive environments-A review of influence factors and comparison with ordinary portland cement10.1016/j.conbuildmat.2021.122496 ↗
36. Chloride induced corrosion of steel reinforcement in alkali activated slag concretes: a critical review
37. Study on Cl- solidification characteristics and enhancement principle of alkali excited materials modified with high-performance strong base anion exchange resin10.1016/j.conbuildmat.2024.137314 ↗
38. Trends of international maritime politics and China's strategic choices
39. Ouantitative measurement of airborne sea-salt in the north Atlantic10.3402/tellusa.v30i4.10354 ↗
40. Salt nucler in marine air as a function of altitude and wind force
41. Bubble formation and modification in the sea and its meteorological significance10.3402/tellusa.v9i2.9094 ↗
42. Observed inter-relations between 10m winds, ocean whitecaps and marine aerosols
43. F. ReschAir sea particulate exchanges in coastal regions[C]//First Int. Conf. on Meteorology and Air/Sea Interaction of the Coastal Zone, 1982: 54-57.
44. The influence of terrestrial transport on visibility and aerosol properties over the coastal east China Sea10.1016/j.scitotenv.2018.08.312 ↗
45. Effects of Cl- erosion conditions on Cl- binding properties of Fly-ash-slag-based geopolymer
46. JC/T 2381-2016. “Repair mortar”, Ministry of Industry and Information Technology of the People's Republic of China.
47. GB/T 50081-2019. “Standard for Test Methods of Mechanical Properties of Ordinary Concrete”, Ministry of Housing and Urban-Rural Development of the People’s Republic of China.
48. Zhou · 2012
49. Study on performance improvement and micro-mechanism of polyaluminum chloride enhanced slag portland cement
50. Micro-structure characterization of the hydration products of bauxite-calcination-method red mud-coal gangue based cementitious materials10.1016/j.jhazmat.2013.08.078 ↗
51. ESCA studies of the coordination state of aluminium in oxide environments10.1039/a604061f ↗
52. Putnis · 1992
53. XPS analysis of hydration process of red mud-coal gangue based cementitious materials
54. Wu · 1999
55. Exploration of a teaching model integrating theory and practice in chemical kinetics for university chemistry courses: a case study of the arrhenius equation and catalyst applications