journal article·2025-09

Development of sustainable materials from phosphate-activated by-products: Thermal and structural properties

Salma En-naji, Salma Chhaiba, Safaa Mabroum, Yassine Taha, Sylvio Indris, Jaafar Ghanbaja, Rachid Hakkou, Inés Garcia Lodeiro

Publisher page

Abstract

This paper presents an innovative approach to the development of phosphate-based binders through a geopolymerization-inspired process using alternative activators and precursors. A clay by-product (phosphate waste rock), containing montmorillonite and dolomite, was selected as the precursor. Phosphate salts, including NaH2PO4, KH2PO4, and (NaPO3)n, were used as activators. Different analyses were performed to evaluate the potential of both precursors and activators, develop the alternative binders, and investigate the types of reaction products formed. The mechanical properties and microstructure of pastes prepared with previous materials were explored. The reaction products were characterized from the mineralogical (XRD, FTIR), microstructural (TEM/EDS), and nanostructural (29Si, 27Al, and 31P NMR) perspectives. Results showed that, regardless of the type and proportion of activator used, hydroxyapatite was the predominant crystalline phase precipitated in all the cementitious systems, with portlandite, brucite, and hydrotalcite detected as secondary phases. In addition, TEM and NMR analyses performed on alternative binders containing 10 % of each activator confirmed the formation of a common amorphous content, identified as C-(A)-S-H gel. However, increasing the NaH2PO4 content resulted in changes in the reaction products. The amount of hydroxyapatite increased, hydrotalcite disappeared, and new gel phases were detected, labeled as (N,C)-A-S-H and N-A-S-H gels (both containing Mg). This study highlights the potential of phosphate salts as innovative activators in the development of a new type of binder, offering a novel alternative within the field. Furthermore, the thermal conductivity results of materials developed with 10 % phosphate salts confirm their suitability for thermal insulation applications, where high compressive strength is not critical.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Shifting the paradigm for phosphorus fertilization in the advent of the fertilizer crisis10.1002/sae2.12040 ↗
2. Valorization of phosphate waste rocks and sludge from the Moroccan phosphate mines: challenges and perspectives10.1016/j.proeng.2016.02.068 ↗
3. Elaboration of geopolymers based on clays by-products from phosphate mines for construction applications10.1016/j.jclepro.2020.121317 ↗
4. Elaboration of compressed earth blocks based on phosphogypsum and phosphate mining By-Products
5. Acid-based geopolymers using waste fired brick and different metakaolins as raw materials10.1016/j.clay.2020.105813 ↗
6. Proposition of geopolymers obtained through the acid activation of iron ore tailings with phosphoric acid10.1016/j.conbuildmat.2023.133078 ↗
7. Formation of CSH and MSH gels in alkali-activated materials based on marl by-products from phosphate mines10.1016/j.conbuildmat.2022.130029 ↗
8. Synthesis, characterization and application of acid and alkaline activated volcanic ash-based geopolymers for adsorptive remotion of cationic and anionic dyes from water10.1016/j.ceramint.2021.04.097 ↗
9. Valorization of sugar beet waste as a foaming agent for metakaolin geopolymer activated with phosphoric acid10.1016/j.conbuildmat.2022.128240 ↗
10. Geopolymers: inorganic polymeric new materials10.1007/BF01912193 ↗
11. Mechanical and microstructural properties of metakaolin-based geopolymer cements from sodium waterglass and phosphoric acid solution as hardeners: a comparative study10.1016/j.clay.2017.02.002 ↗
12. Relative strengths of phosphoric acid-reacted and alkali-reacted metakaolin materials10.1007/s10853-008-2913-6 ↗
13. Novel porous phosphoric acid-based geopolymer foams for adsorption of Pb(II), Cd(II) and Ni(II) mixtures: behavior and mechanism10.1016/j.ceramint.2022.10.164 ↗
14. Elaboration of alkali activated materials using a non-calcined red clay from phosphate mines amended with Fly ash or slag: a structural study10.1016/j.matchemphys.2020.123678 ↗
15. Design of acid-geopolymers based on clays by-products for methylene blue removal from wastewater10.1016/j.clay.2023.107126 ↗
16. Natural fibers as an alternative to synthetic fibers in the reinforcement of phosphate sludge-based geopolymer mortar
17. Use of phosphate mine by-products as supplementary cementitious materials10.1016/j.matpr.2020.07.619 ↗
18. Geopolymers based on phosphoric acid and illito-kaolinitic clay10.1155/2016/2359759 ↗
19. Mechanical and microscopic properties of fly ash phosphoric acid-based geopolymer paste: a comprehensive study10.1016/j.conbuildmat.2021.123947 ↗
20. Phosphoric acid activation of volcanic ashes: influence of the molar ratio r = (MgO + CaO) / P2O5 on reactivity of volcanic ash and strength of obtained cementitious material
21. Properties and mechanism of high-magnesium nickel slag-fly ash based geopolymer activated by phosphoric acid10.1016/j.conbuildmat.2022.128256 ↗
22. Use of clays by-products from phosphate mines for the manufacture of sustainable lightweight aggregates10.1016/j.jclepro.2020.124361 ↗
23. Effect of high temperatures on the microstructure of cement paste
24. Development of geopolymers from phosphate by-products for thermal insulation applications10.3390/min13121480 ↗
25. Phase transformation, technological properties and microstructure of fired products based on clay-dolomite mixtures
26. Calibrated quantitative thermogravimetric analysis for the determination of portlandite and calcite content in hydrated cementitious systems10.1617/s11527-017-1046-2 ↗
27. Dissolution kinetics of calcined kaolinite and montmorillonite in alkaline conditions: evidence for reactive Al(V) sites10.1111/jace.16663 ↗
28. Chloride diffusion resistance and chloride binding capacity of fly ash-based geopolymer concrete10.1016/j.cemconcomp.2019.04.006 ↗
29. Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation10.1016/j.jclepro.2014.11.074 ↗
30. The effects of phosphate concentration on the recovery of phosphate from alkaline solution by hydrated lime and calcined oyster shell: recovery efficiency, capacity and hydroxyapatite purity10.1016/j.envadv.2023.100363 ↗
31. Phosphate’s second life: upcycling phosphogypsum and clay by-product through acid geopolymer technology10.1016/j.conbuildmat.2024.138829 ↗
32. Hydrotalcites and their role in coordination of anions in bayer liquors: anion binding in layered double hydroxides10.1016/j.ccr.2008.01.012 ↗
33. Evaluation of fillers for magnesium potassium phosphate cement (MKPC) for the encapsulation of low and intermediate level metallic radioactive wastes10.3390/ma16020679 ↗
34. Thermodynamic data for magnesium (Potassium) phosphates10.1016/j.apgeochem.2019.104450 ↗
35. Influence of the molar concentration of phosphoric acid solution on the properties of metakaolin-phosphate-based geopolymer cements10.1016/j.clay.2017.07.036 ↗
36. Recycling of phosphate tailings for an efficient hydroxyapatite-based adsorbent to immobilize heavy metal cations10.1007/s11356-023-27544-7 ↗
37. Morphology-structural change of C-A-S-H gel in blended cements10.1016/j.cemconres.2023.107156 ↗
38. Cementation of spent radioactive ion-exchange resin ashes using alkali-activated cements: physicochemical and structural changes10.1016/j.cemconcomp.2024.105517 ↗
39. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
40. Aluminum incorporation into magnesium silicate hydrate (M-S-H)10.1016/j.cemconres.2019.105931 ↗
41. Preparation and characterization of Nano-Hydroxyapatite and its competitive adsorption kinetics of copper and lead ions in water10.1177/1847980416680807 ↗
42. Synergistic gel formation in geopolymers of superior mechanical strength synthesized with volcanic ash and slag10.1007/s11356-022-23877-x ↗
43. Mineralization followup with the use of NMR spectroscopy and others10.1002/jbm.10255 ↗
44. Porosity, mechanical and insulating properties of geopolymer foams using vegetable oil as the stabilizing agent10.1016/j.jeurceramsoc.2017.09.021 ↗
45. Porous metakaolin geopolymers with tailored thermal conductivity10.1088/1757-899X/551/1/012088 ↗
46. Synthesis of calcined kaolin-based geopolymer foam: assessment of mechanical properties, thermal insulation, and elevated temperature stability10.1016/j.ceramint.2022.11.174 ↗
47. Mechanical and thermal properties of bottom ash-based porous geopolymer as thermal insulation material for construction10.1007/s10163-023-01732-6 ↗
48. Development of geopolymers from phosphate By-Product for thermal insulation applications10.3390/min13121480 ↗