Metal–organic framework-enabled CO₂ storage: Microstructural and mechanical performance investigation in cement-based materials
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (100+)
Show source-provided references
1. Analysis of carbon emissions from land cover change during 2000–2020 in Shandong Province, China10.1038/s41598-022-12080-0 ↗
2. A review on CO2 capture with chilled ammonia and CO2 utilization in urea plant10.1016/j.jcou.2022.102030 ↗
3. Global carbon emissions and decarbonization in 202410.1038/s43017-025-00658-x ↗
4. Chapter 2 - Impacts of climate change on economies, ecosystems, energy, environments, and human equity: A systems perspective
5. Impacts of Climate Change
6. Carbon sequestration and storage in concrete: A state-of-the-art review of compositions, methods, and developments10.1016/j.jcou.2023.102443 ↗
7. Effect of further water curing on compressive strength and microstructure of CO2-cured concrete10.1016/j.cemconcomp.2016.05.026 ↗
8. Carbon capture, utilization, and storage for sustainable construction: Insights into CO2 mixing, curing, and mineralization
9. CO2 storage in cement and concrete by mineral carbonation
10. Effects of early-age carbonation curing on the properties of cement-based materials: A review
11. Effects of calcium carbide slag on properties and carbon sequestration efficiency of cement pastes mixed under direct CO2 injection conditions10.1016/j.jcou.2024.102835 ↗
12. A review on carbon dioxide capture and storage technology using coal fly ash10.1016/j.apenergy.2013.01.062 ↗
13. Potential of major by-products from non-ferrous metal industries for CO2 emission reduction by mineral carbonation: a review10.1007/s11356-023-27898-y ↗
14. Use of biochar as carbon sequestering additive in cement mortar10.1016/j.cemconcomp.2017.12.009 ↗
15. Carbon capture and storage potential of biochar-enriched cementitious systems10.1016/j.cemconcomp.2023.105078 ↗
16. Optimization of biochar and fly ash to improve mechanical properties and CO2 sequestration in cement mortar10.1016/j.conbuildmat.2023.132021 ↗
17. L. Whyte, Incorporating synthetic zeolites into 3D printed concrete for carbon capture, Loughborough University.
18. Biochar-zeolite modified super sulphate cement as a high-performance, sustainable and high-efficiency CO₂ sequestration cementitious material10.1016/j.conbuildmat.2025.142475 ↗
19. Metal–Organic Framework Materials with Ultrahigh Surface Areas: Is the Sky the Limit?10.1021/ja3055639 ↗
20. The stability of MOFs in aqueous solutions—research progress and prospects10.1016/j.gce.2023.07.004 ↗
21. Advances and Applications of Metal-Organic Frameworks (MOFs) in Emerging Technologies: A Comprehensive Review
22. Optimization of the Pore Structures of MOFs for Record High Hydrogen Volumetric Working Capacity10.1002/adma.201907995 ↗
23. Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework10.1038/s41467-020-20489-2 ↗
24. Ultrahigh Size Exclusion Selectivity for Carbon Dioxide from Nitrogen/Methane in an Ultramicroporous Metal-Organic Framework10.1021/acs.inorgchem.2c00608 ↗
25. High-Performance UiO-66-NH₂/PI MMMs: Overcoming Interfacial Defects for High-Temperature Gas Separation Applications10.1002/aoc.70109 ↗
26. Amino-Functionalizing Ce-Based MOF UiO-66 for Enhanced CO2 Adsorption and Selectivity
27. Recent advances in gas storage and separation using metal–organic frameworks10.1016/j.mattod.2017.07.006 ↗
28. Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks10.1016/j.ccr.2011.02.012 ↗
29. Improving CO2 adsorption capacity and CO2/N2 selectivity of UiO-66-NH2 via defect engineering and IL-encapsulation10.1016/j.micromeso.2024.113038 ↗
30. Post-synthetic modification of UiO-66 analogue metal-organic framework as potential solid sorbent for direct air capture10.1016/j.jcou.2023.102647 ↗
31. Amino-modified ZIF-8 for enhanced CO2 capture: Synthesis, characterization and performance evaluation10.1016/j.micromeso.2023.112956 ↗
32. Excellent CO2 adsorption performance of amine-impregnated highly porous ZIF-8 adsorbent: Experimental and isotherm modeling studies10.1016/j.apt.2024.104344 ↗
33. Morphology control through the synthesis of metal-organic frameworks10.1016/j.cis.2023.102864 ↗
34. Thermal stability of ZIF-8 under oxidative and inert environments: A practical perspective on using ZIF-8 as a catalyst support10.1016/j.cej.2014.08.075 ↗
35. Biocompatibility characteristics of the metal organic framework ZIF-8 for therapeutical applications10.1016/j.apmt.2017.12.014 ↗
36. Thermal degradation of defective high-surface-area UiO-66 in different gaseous environments10.1039/D1RA05411B ↗
37. Stability of Zr-Based UiO-66 Metal–Organic Frameworks in Basic Solutions10.3390/nano14010110 ↗
38. Defect-induced tuning of polarity-dependent adsorption in hydrophobic–hydrophilic UiO-6610.1038/s42004-022-00742-z ↗
39. Diverse effects of metal–organic frameworks on microstructure and compressive strength of cement-based composites10.1016/j.cemconcomp.2022.104406 ↗
40. Synthesis, Characterization, and Application of ZIF-67 Metal-Organic Framework to Enhance the Microstructure and Compressive Strength of Cement Composite10.1061/JMCEE7.MTENG-14637 ↗
41. Effect of UiO-66 and UiO-66-NH2 Synthesized Using In Situ Self-Assembly on the Mechanical Properties of Cement-Based Materials10.1061/JMCEE7.MTENG-18597 ↗
42. Toward greener MOFs in phosphate adsorption: A performance-based approach to green MOF selection10.1016/j.envres.2025.122185 ↗
43. Toward a Green SPPS: The Use of an Innovative Mesoporous pDVB Support for Environmentally Friendly Solvents10.1002/psc.70038 ↗
44. New synthetic strategies to prepare metal–organic frameworks10.1039/C8QI00543E ↗
45. Rapid synthesis of zeolitic imidazolate framework-8 (ZIF-8) nanocrystals in an aqueous system10.1039/c0cc05002d ↗
46. A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability10.1021/ja8057953 ↗
47. Synthesis and Stability of Tagged UiO-66 Zr-MOFs10.1021/cm102601v ↗
48. AS 3972 General purpose and blended cements, Standards Australia, Australia, 2021.
49. AS 1478.1 Chemical admixtures for concrete, mortar and grout, Part 1: Admixtures for concrete, Standards Australia, Australia, 2000.
50. Stability of ZIF-8 in water under ambient conditions10.1016/j.micromeso.2018.12.035 ↗
51. Green, One-Step Mechanochemical Synthesis and Techno-economic Analysis of UiO-66-NH210.1021/acsaem.2c02460 ↗
52. The Gore-Tex® effect in externally hydrophobic Metal–Organic Frameworks10.1039/D3MA00716B ↗
53. Synthesis of a Zn(II)-2-aminoimidazole Framework as an Efficient Carbonic Anhydrase Mimic10.1021/acs.langmuir.4c02563 ↗
54. Efficient adsorption of Levofloxacin from aqueous solution using calcium alginate/metal organic frameworks composite beads10.1007/s10971-019-05001-7 ↗
55. Oxidative pyrolysis for enhanced-CO2 adsorption capacity in biosolid-derived biochar10.1016/j.biombioe.2024.107407 ↗
56. AIM: A User-friendly GUI Workflow program for Isotherm Fitting, Mixture Prediction, Isosteric Heat of Adsorption Estimation, and Breakthrough Simulation
57. Appraising separation performance of MOF-808-based adsorbents for light olefins and paraffins10.1016/j.micromeso.2023.112961 ↗
58. Improvement of a fractionation simulation
59. Ideal Adsorbed Solution Theory (IAST) of Carbon Dioxide and Methane Adsorption Using Magnesium Gallate Metal-Organic Framework (Mg-gallate)10.3390/molecules28073016 ↗
60. Predicting multicomponent adsorption: 50 years of the ideal adsorbed solution theory10.1002/aic.14878 ↗
61. Enhancing the CO2, CH4, and N2 adsorption and kinetic performance on FAU zeolites for CO2 capture from flue gas by metal incorporation technique10.1016/j.cej.2023.143719 ↗
62. Increased CO2 Affinity and Adsorption Selectivity in MOF-801 Fluorinated Analogues10.1021/acsami.2c07640 ↗
63. Adsorption separation of CO2 and N2 on MIL-101 metal-organic framework and activated carbon10.1007/s13738-013-0347-9 ↗
64. Unravelling the impact of ZIF-8, ZIF-67, and ZIF 8-67 on cement composites: insights into microstructure, mechanical strength and rheology10.1080/19648189.2024.2372615 ↗
65. Dispersion of Graphene Oxide in Saturated Ca(OH)2 Solution by Using Different Water-reducing Agents10.1088/1742-6596/1750/1/012063 ↗
66. Dispersion of graphene oxide–silica nanohybrids in alkaline environment for improving ordinary Portland cement composites10.1016/j.cemconcomp.2019.103488 ↗
67. Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC10.1617/s11527-020-01558-w ↗
68. ASTM C109/C109M-20 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens), ASTM International, West Conshohocken, United States, 2021.
69. ASTM C511-21 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes, ASTM International, West Conshohocken, United States, 2021.
70. Oxidative pyrolysis of biosolid: Air concentration effects on biochar formation and kinetics10.1016/j.renene.2024.120106 ↗
71. Adsorption of Gases in Multimolecular Layers10.1021/ja01269a023 ↗
72. D-BJH: The Intrinsic Model for Characterizing the Pore Size Distribution of Porous Materials10.1021/acs.langmuir.4c01548 ↗
73. Enhancing the strength, microstructural integrity, and shrinkage performance of cement-based mortar using pulverised carbon and glass FRP composite waste
74. Void geometry analysis and multifaceted characterisation of cementitious mortar reinforced with short carbon and glass fibres – A comparative study
75. BS EN 1015-3 Methods of test for mortar masonry - Part 3: Determination of consistence of fresh mortar (by flow table), British Standards Institution, UK, 1999.
76. ASTM C642-21 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, West Conshohocken, United States, 2022.
77. AASHTO Designation: T 358 - Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration, American Association of State Highway and Transportation Officials, Washington, D.C, 2015.
78. Effect of Zr-based metal–organic framework (MOF-808) on strength development of cement pastes and its phase transition on mechanisms of cement hydration
79. Synthesis of zeolitic imidazolate framework-8 on polyester fiber for PM2.5 removal10.1039/C8RA06414H ↗
80. Enhancement in the CO2 uptake of UiO-66 by a simple exposure to ultraviolet light
81. Highly stable UiO-66-NH2 by the microwave-assisted synthesis for solar photocatalytic water treatment10.1016/j.jece.2021.107122 ↗
82. Effect of the Incorporation of ZIF-8@GO into the Thin-Film Membrane on Salt Rejection and BSA Fouling10.3390/membranes12040436 ↗
83. Fabrication of ZIF-8@SiO2 Micro/Nano Hierarchical Superhydrophobic Surface on AZ31 Magnesium Alloy with Impressive Corrosion Resistance and Abrasion Resistance10.1021/acsami.6b16848 ↗
84. Effective adsorption of mercury by Zr(IV)-based metal-organic frameworks of UiO-66-NH2 from aqueous solution10.1007/s11356-020-11080-9 ↗
85. Hf-Based UiO-66 as Adsorptive Compound and Oxidative Catalyst for Denitrogenation Processes10.3390/compounds1010002 ↗
86. Application of zirconium-based metal–organic frameworks for micro-extraction by packed sorbent of urinary trans, trans-muconic acid10.1007/s13738-020-01930-1 ↗
87. UiO-66-NH₂/GO Composite: Synthesis, Characterization and CO₂ Adsorption Performance
88. Mechanochemical Synthesis of Metal−Organic Frameworks: A Fast and Facile Approach toward Quantitative Yields and High Specific Surface Areas10.1021/cm1012119 ↗
89. Mechanochemistry: opportunities for new and cleaner synthesis10.1039/C1CS15171A ↗
90. Lowell · 2013
91. Combined contributions from multidimensional micropores and mesopores of hierarchical porous carbons for extraordinary Li-ion storage applications10.1016/j.carbon.2023.118390 ↗
92. Construction of crystal defect sites in N-coordinated UiO-66 via mechanochemical in-situ N-doping strategy for highly selective adsorption of cationic dyes10.1016/j.cej.2018.09.060 ↗
93. J.M. Marrett, F. Effaty, X. Ottenwaelder, T. Friščić, Mechanochemistry for Metal–Organic Frameworks and Covalent–Organic Frameworks (MOFs, COFs): Methods, Materials, and Mechanisms, n/a(n/a) 2418707.
94. Multicomponent adsorptive separation of CO2, CH4, N2, and H2 over M-MOF-74 and AX-21@M-MOF-74 composite adsorbents10.1016/j.micromeso.2022.111899 ↗
95. Characterization of aerosol emissions from CO2 capture plants treating various power plant and industrial flue gases10.1016/j.ijggc.2018.04.016 ↗
96. Polyethyleneimine-Modified UiO-66-NH(2)(Zr) Metal-Organic Frameworks: Preparation and Enhanced CO(2) Selective Adsorption10.1021/acsomega.8b02319 ↗
97. Synergistic enhancement of CO2 adsorption by Cu doping and thermal reconstruction in ZIF-8 derived heterostructures10.1016/j.apsusc.2026.167313 ↗
98. Grafting alkylamine in UiO-66 by charge-assisted coordination bonds for carbon dioxide capture from high-humidity flue gas10.1039/C5TA05997F ↗
99. A Novel Strategy to Enhance the Performance of CO2 Adsorption Separation: Grafting Hyper-cross-linked Polyimide onto Composites of UiO-66-NH2 and GO10.1021/acsami.1c00917 ↗
100. Calcium Oxide Catalyst Based on Quail Eggshell for Biodiesel Synthesis from Waste Palm Oil10.21776/ub.jpacr.2018.007.02.390 ↗