journal article·2025-10

Development of phosphate mine waste-based geopolymer by mechanosynthesis

Ghizlane Moutaoukil, Isabel Sobrados, Jorge S. Dolado

Publisher page

Abstract

This study explores the valorization of phosphate mine by-product—an abundant aluminosilicate-rich waste—through the synthesis of geopolymers using the mechanosynthesis method. While mechanosynthesis has been applied in geopolymer research, this work is the first to employ it by using the phosphate mine waste as a precursor. The geopolymer samples produced by mechanosynthesis (GPMS) were compared with conventionally prepared geopolymer pastes (GPC) to assess their microstructural and mechanical properties. Geopolymer powders (PGP) were prepared by milling a solid blend of phosphate mine waste (YC) and alkaline activators. The YC/alkaline activator ratios were (1.5 and 2.5), Na2SiO3/NaOH mass ratios were (1.5, 2.5 and 3.5) and milling times of 10 and 20 min. The obtained GP-P, GP-C and GP-MS were characterized by X-ray diffraction (XRD), Magic-Angle Spinning Nuclear Magnetic Resonance Spectroscopy (29Si and 27Al MAS NMR), particle size distribution and compressive strengths. Milling the raw materials resulted in the development of new crystalline structures. Additionally, the mechanosynthesis process improved the reactivity of the YC, which was evidenced by the observed increase in compressive strength 45 % for mix1 and 26 % for mix2.
Source: openaire · Quality: candidate unverified · Source record ↗

References (40)

Show source-provided references
1. Geopolymers: inorganic polymeric new materials10.1007/BF01912193 ↗
2. J. Davidovits, Global Warming Impact on the Cement and Aggregates Industries, (n.d.) 23.
3. J.L. Provis, J.S.J. van Deventer, Geopolymers: Structures, Processing, Properties and Industrial Applications, Elsevier, 2009.10.1533/9781845696382 ↗
4. J. Davidovits, Properties Geopolymer Cements, 1994, 19.
5. Geopolymers and related Alkali-Activated materials10.1146/annurev-matsci-070813-113515 ↗
6. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate10.1016/j.ceramint.2014.12.154 ↗
7. Utilization of zinc slag through geopolymerization: influence of milling atmosphere10.1016/j.minpro.2013.06.001 ↗
8. Mechanically induced reactivity of gibbsite: part 1. Planetary milling10.1016/j.powtec.2014.05.028 ↗
9. Preparation of one-part alkali-activated nickel slag binder using an optimal ball milling process10.1016/j.conbuildmat.2021.125902 ↗
10. Physico-chemical and mechanical properties of fly ash based-geopolymer pastes produced from pre-geopolymer powders obtained by mechanosynthesis10.1016/j.conbuildmat.2021.123135 ↗
11. PCA effect on structure of Fly ashes and slag obtained by mechanosynthesis. Applications: mechanical performance of substituted paste CEMI + 50% slag /or Fly ashes10.1016/j.conbuildmat.2019.01.063 ↗
12. Cement and clinker production by indirect mechanosynthesis process
13. Influence of slag based pre-geopolymer powders obtained by mechanosynthesis on structure, microstructure and mechanical performance of geopolymer pastes10.1016/j.conbuildmat.2022.129637 ↗
14. Physico-chemical and mechanical properties of Fly ash based-geopolymer pastes produced from pre-geopolymer powders obtained by mechanosynthesis10.1016/j.conbuildmat.2021.123135 ↗
15. Characterization of alkali activated materials prepared from continuous attrition and ball milled Fly ashes10.3390/min13040490 ↗
16. Optimization of compressive strength of Fly ash-based geopolymers using central composite design10.1007/s12034-021-02424-3 ↗
17. ASTM D 1633 · 2017
18. Microstructural and 29Si and 27Al MAS NMR spectroscopic evaluations of alkali cation and curing effects on class c Fly ash-based geopolymer10.1016/j.cdc.2022.100898 ↗
19. Luminescence sensitivity changes in natural quartz induced by high temperature annealing: a high frequency EPR and OSL study10.1088/0022-3727/33/8/318 ↗
20. Influence of calcination temperature on the physical and chemical characteristics of kaolinitic clays for use as supplementary cementitious materials10.1016/j.cemconres.2024.107464 ↗
21. Activation of ground granulated blast furnace slag by using calcined dolomite10.1016/j.conbuildmat.2014.06.044 ↗
22. Thermal decomposition of dolomite under CO2: insights from TGA and in situ XRD analysis10.1039/C5CP05596B ↗
23. High strength metahalloysite based geopolymer10.1016/j.compositesb.2013.09.034 ↗
24. Dolomite—magnesian calcite relations at elevated temperatures and CO2 pressures10.1016/0016-7037(55)90023-5 ↗
25. Elaboration of geopolymers based on clays by-products from phosphate mines for construction applications10.1016/j.jclepro.2020.121317 ↗
26. Thermal activation of a pure montmorillonite clay and its reactivity in cementitious systems10.1021/jp502529d ↗
27. Efficiency of high energy over conventional milling of granulated blast furnace slag powder to improve mechanical performance of slag cement paste10.1016/j.powtec.2016.12.014 ↗
28. Structural and thermal behavior of proclay kaolinite using high energy ball milling process10.1016/j.powtec.2014.11.018 ↗
29. Effect of ball-milling on crystallinity index, degree of polymerization and thermal stability of cellulose10.1016/j.biortech.2018.09.029 ↗
30. Effect of milling time on XRD phases and microstructure of a novel Al67Cu20Fe10B3 quasicrystalline alloy10.1088/2053-1591/ab9b37 ↗
31. Structure of calcium silicate hydrates formed in Alkaline-Activated slag: influence of the type of alkaline activator10.1111/j.1151-2916.2003.tb03481.x ↗
32. Effect of the SiO2/Na2O ratio on the alkali activation of Fly ash. Part II: 29Si MAS NMR survey10.1016/j.micromeso.2007.05.062 ↗
33. Chapter 9 - geopolymerization of coal Fly ash: effect of milling and mechanical activation, in
34. L. Sánchez-Muñoz, L. Garrido Fernández, F. Muñoz Fraile, J. Sanz Lázaro, Applications of NMR Spectroscopy in the solid state, Consejo Superior de Investigaciones Científicas (España), 2019. 〈https://digital.csic.es/handle/10261/248570〉 (accessed November 4, 2022).
35. The characteristics of mechanical grinding on kaolinite structure and thermal behavior10.1016/j.egypro.2012.01.197 ↗
36. Thermal resistance variations of Fly ash geopolymers: foaming responses10.1038/srep45355 ↗
37. Effects of elevated temperature and activation solution content on microstructural and mechanical properties of Fly Ash-based geopolymer10.1007/s12205-023-1102-0 ↗
38. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of Fly ash10.1016/j.cemconcomp.2013.09.006 ↗
39. Evolution of advanced geopolymeric cementitious material via a novel process10.1680/jadcr.16.00113 ↗
40. Fly ash-GGBS blended geopolymer mortar for early engineering characteristic at ambient temperature10.1016/j.asej.2024.102821 ↗