Understanding the stress-dependent resilient modulus of cement-treated aggregate via discrete element modeling
Source abstract
Abstract
Cement treated aggregate (CTA) is the primary material for constructing the base layer of highway pavements in China, and its resilient modulus has been proven notably stress-dependent. Existing testing specifications have limitations, being restricted to uniaxial tests or trial loading sequence fail to clearly differentiate between bulk and shear stress. This leads to uncertainty and high variability in the parameters of resilient modulus prediction models. Additionally, the microscopic mechanisms underlying the stress-dependent resilient modulus of CTA are yet insufficiently understood. In this study, unconfined compressive strength tests (UCS) and repeated load triaxial tests (RLT) were conducted on CTA at three supersulfate cement contents. A dynamic triaxial loading scheme was proposed to independently address the effects of bulk and shear stresses on the resilient modulus. Results indicate that CTA exhibits stress-dependent nonlinear characteristics, with its resilient modulus positively correlated with bulk stress and negatively correlated with octahedral shear stress. Among the three stress-dependent models compared, the NCHRP1–28A prediction model demonstrated the highest accuracy. Using the discrete element method (DEM), it was revealed that the stress nonlinearity of CTA arose from more tensile contacts at the microscale between aggregate particles under shear stresses, leading to reduced friction between particles and a subsequently reduced resilient modulus. In comparison, under bulk stress, more compressive contacts were detected between aggregate particles at the microscale, improving interlocking and friction between the particles.
Source: expertdata · Quality: candidate unverified · Source record ↗
References (49)
Show source-provided references
1. C. Standard, Specifications for Design of Highway Asphalt Pavement, JTG D50-2017, China, 2017.
2. Validated model for predicting field performance of aggregate base courses10.3141/1837-05 ↗
3. Permanent deformation of a granular base material10.3141/1673-12 ↗
4. Resilient moduli response of moderately cement-treated reclaimed asphalt pavement aggregates10.1061/(ASCE)MT.1943-5533.0000268 ↗
5. Laboratory determination of anisotropic aggregate resilient moduli using an innovative test device10.3141/1687-02 ↗
6. AASHTO, American Association of State Highway and Transportation Officials: Guide for Design of Pavement Structures, Washington, DC, 1993.
7. ASTM, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, ASTM C469, West Conshohocken, PA, 2014.
8. EN:13286–43, Unbound and hydraulically bound mixtures-Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures, European Committee for Standardization (CEN): Brussels, Belgium; European Union: Brussels, Belgium, 2004.
9. Equivalent mechanical method for asphalt pavement structure based on material nonlinearity
10. Test and Analysis on Different Moduli of Semi-rigid Base Material
11. Estimation of resilient modulus of cement-treated construction and demolition waste with performance-related properties10.1016/j.conbuildmat.2020.122107 ↗
12. Laboratory evaluation of the use of cement-treated construction and demolition materials in pavement base and subbase applications10.1061/(ASCE)MT.1943-5533.0001148 ↗
13. AASHTO, Standard method of test for determining the resilient modulus of soils and aggregate materials, T307–99, Washington, 2003.
14. Analysis of three-dimensional stress state and failure criteria for asphalt pavement structure
15. S.N. Amirkhanian, M. Corley, Characterization of Bases and Subbases for AASHTO ME Pavement Design, South Carolina. Dept. of Transportation. Office of Materials and Research, 2021.
16. Hanifa · 2015
17. Characterizing resilient behavior of naturally occurring bituminous sands for road construction10.1061/(ASCE)MT.1943-5533.0000115 ↗
18. Resilient moduli characterization of cement-treated silt at high compaction energy conditions10.1177/03611981241252769 ↗
19. Properties of aggregate fines influencing modulus and deformation behaviour of unbound aggregates10.1080/10298436.2019.1623402 ↗
20. Acoustoelastic DZ-MT model for stress-dependent elastic moduli of fractured rocks10.1016/j.ijrmms.2024.105649 ↗
21. Effects of stress anisotropy on the static and dynamic properties of Berea sandstone
22. Mesoscale numerical simulation of fracture of cement treated base material during semi circular bending test with discrete element model10.1016/j.conbuildmat.2020.119981 ↗
23. Discrete element method study of hysteretic behavior and deformation characteristics of rockfill material under cyclic loading10.1631/jzus.A2200286 ↗
24. Resilient properties of soil-rock mixture materials: preliminary investigation of the effect of composition and structure10.3390/ma13071658 ↗
25. Super sulfated cement: formulation and uses
26. C. Standard, Technical guidelines for construction of highway road bases, JTG/T F20–2015, China, 2015.
27. C. Standard, Test Methods of Materials Stabilized with Inorganic Binders for Highway Engineering, JTG 3441–2024, China, 2024.
28. Self-healing capability of cementitious composites incorporating different supplementary cementitious materials10.1016/j.cemconcomp.2012.08.013 ↗
29. Evaluation of the healing potential of asphalt mixtures based on a modified semi-circular bending test10.1016/j.conbuildmat.2018.10.220 ↗
30. Modeling stress-dependent anisotropic elastoplastic unbound granular base in flexible pavements10.1177/0361198118758318 ↗
31. Characterization of granular material
32. Witczak · 1988
33. R.D. Barksdale, J.Lago Alba, N.P. Khosla, R. Kim, P.C. Lambe, M. Rahman, Laboratory determination of resilient modulus for flexible pavement design, 1997.
34. Aggregate morphology affecting resilient behavior of unbound granular materials10.1177/0361198106195200102 ↗
35. Particle size distribution effects on deformation properties of graded aggregate base under cyclic loading10.1080/19648189.2016.1276480 ↗
36. S. N · 2022
37. Discrete element analysis of recycled concrete aggregate responses during repeated load triaxial testing10.1016/j.trgeo.2020.100356 ↗
38. Micromechanics of granular material response during load reversals: combined DEM and experimental study10.1016/j.powtec.2009.03.003 ↗
39. A 3D Mesoscopic Model for Simulating Failure Process of Concrete Based on Discrete Element Method
40. Effect of interparticle friction on the cyclic behavior of granular materials using 2D DEM10.1061/(ASCE)GT.1943-5606.0000441 ↗
41. Itasca · 2014
42. Evaluating the mastic distribution of asphalt mixtures based on a new thickness threshold using 2D image planers10.1080/14680629.2017.1323001 ↗
43. Systematical calibration and validation of discrete element models for fiber reinforced cement treated aggregates10.1016/j.conbuildmat.2023.131832 ↗
44. Micromechanical modeling of cement-treated base materials considering recycled crushed aggregate morphology from construction and demolition waste using three-dimensional discrete element method10.1520/JTE20230749 ↗
45. Influence of mesoscale heterogeneous and initial defects on the fracture of cement-treated base materials10.1016/j.conbuildmat.2020.121669 ↗
46. Modeling of stress-dependent static and dynamic moduli of weak sandstones10.1029/2011JB009019 ↗
47. Mesoscale cracking of cement-treated composites with initial defects
48. Effects of particle size and gradation on shear behavior of interface between crushed stone and structure
49. Modeling the stress dependence of elastic wave velocities in soft rocks