Atomic-scale interfacial reconstruction between N-A-S-H and C-A-S-H gels under thermal and environmental stimuli revealed by reactive molecular dynamics
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (70)
Show source-provided references
1. Development of in-situ highly active calcium carbonate through anhydrous carbonation of OPC: Effect on hydration and properties of cement composites10.1016/j.cemconres.2025.107980 ↗
2. Review on the sustainable development of alkali-activated materials using waste-derived activators: Mechanical and environmental perspectives
3. Effect of initial calcium to silicon ratio on the hybrid alkali-activated cement: from strength development to microstructure evolution10.1016/j.conbuildmat.2025.140179 ↗
4. Early mechanical strength, hydration mechanism and leaching behavior of alkali-activated slag/fly ash paste filling materials
5. Microstructure, strength development mechanism, and CO2 emission analyses of alkali-activated fly ash-slag mortars10.1016/j.jclepro.2024.141116 ↗
6. Durability of slag-based alkali-activated materials: a critical review10.1007/s41779-024-01011-z ↗
7. Mechanical properties of fly ash-slag based alkali-activated materials under the low-energy consummation-sealed curing condition10.1061/(ASCE)MT.1943-5533.0003920 ↗
8. Micro-mechanisms and compressive strength of Geopolymer-Portland cementitious system under various curing temperatures10.1016/j.matchemphys.2016.05.069 ↗
9. Development of eco-efficient fly ash-based alkali-activated and geopolymer composites with reduced alkaline activator dosage10.1061/(ASCE)MT.1943-5533.0003017 ↗
10. Durability performance of low calcium Flyash-Based geopolymer concrete10.1016/j.istruc.2023.05.115 ↗
11. Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag10.1016/j.jclepro.2018.08.255 ↗
12. Effects of initial SiO2/Al2O3 molar ratio and slag on fly ash-based ambient cured geopolymer properties10.1016/j.conbuildmat.2021.123527 ↗
13. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O10.1016/j.cemconres.2011.05.006 ↗
14. Multiscale micromechanical analysis of alkali-activated fly ash-slag paste10.1016/j.cemconres.2020.106141 ↗
15. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
16. Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels
17. Understanding the gel compatibility and thermal behavior of alkali activated Class F fly ash/ladle slag: the underlying role of Ca availability10.1016/j.cemconres.2023.107198 ↗
18. Time-dependent evolution of the microstructural characteristics of C-A-S-H and N-A-S-H gels with various Ca/Si and Al/Si ratios10.1016/j.conbuildmat.2025.144408 ↗
19. Phase evolution of C-(N)-A-S-H/N-A-S-H gel blends investigated via alkali-activation of synthetic calcium aluminosilicate precursors10.1016/j.cemconres.2016.08.010 ↗
20. Behavior of the interfacial transition zone in AAFS-based green recycled aggregate concrete at elevated temperatures10.1016/j.conbuildmat.2025.139872 ↗
21. Molecular dynamics study of the shear behavior of concrete cold joints under different environmental conditions10.1016/j.apsusc.2025.163346 ↗
22. Effects of temperature and humidity on the bonding performance of geopolymers used as concrete repair agents: a molecular dynamics study10.1016/j.conbuildmat.2025.142940 ↗
23. Molecular dynamics study on bonding behaviors of γ-FeOOH/CSH interface under aggressive conditions10.1016/j.apsusc.2024.161342 ↗
24. Investigation of the mechanical properties of C-S-H and α-Fe2O3/Fe3O4 interfaces: a reactive molecular dynamics study10.1016/j.commatsci.2024.113586 ↗
25. Molecular insight in the wetting behavior of nanoscale water droplet on CSH surface: effects of Ca/Si ratio10.1016/j.apsusc.2022.152811 ↗
26. Ca/Si ratio-dependent lubrication mechanisms in calcium silicate hydrate: Implications for concrete fluidity
27. Molecular insights into the microstructure, dynamics, wettability and mechanical properties of sodium aluminum silicate hydrate with saturated nanopores10.1016/j.commatsci.2023.112733 ↗
28. Tuning interfacial properties of C-A-S-H gels through Al/Si ratio control: multiscale simulation insights
29. Nanoscale measurement of adhesion forces and atomic-scale mechanisms at CSH/SiO2 and CSH/PVP-co-PAA interfaces10.1016/j.cemconres.2025.107900 ↗
30. Structure evolution of the interface between graphene oxide-reinforced calcium silicate hydrate gel particles exposed to high temperature10.1016/j.commatsci.2019.109440 ↗
31. Nanoscale insights into concrete fracture via reactive molecular dynamics simulations
32. Reactive molecular dynamics simulation of the mechanical behavior of sodium aluminosilicate geopolymer and calcium silicate hydrate composites10.1016/j.commatsci.2018.04.041 ↗
33. ReaxFF(SiO) reactive force field for silicon and silicon oxide systems10.1021/jp0276303 ↗
34. New insights into the interfacial shear behavior of new-to-old concrete: a molecular dynamics simulation study10.1016/j.conbuildmat.2025.140691 ↗
35. Molecular simulations of the initial stage's induction and formation process of N-A-S-H Gel based on NaOH-activated Metakaolin10.1016/j.jnoncrysol.2023.122804 ↗
36. Nanoscale Insight into the effect of calcium on early-age polymerization of CNASH Gels10.1021/acs.jpcb.3c01953 ↗
37. Dynamics of confined reactive water in smectite clay-zeolite composites10.1021/ja208894m ↗
38. LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
39. Theoretical investigation of C-(A)-S-H(I) cement hydrates10.1016/j.conbuildmat.2018.07.004 ↗
40. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
41. Morphology-structural change of C-A-S-H gel in blended cements
42. Mechanism of aluminium incorporation into C–S–H from ab initio calculations10.1039/C3TA14597B ↗
43. Location of aluminum in substituted calcium silicate hydrate (C-S-H) gels as determined by 29Si and 27Al NMR and EELS10.1111/j.1151-2916.1993.tb07765.x ↗
44. Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions10.1016/j.cemconres.2014.10.015 ↗
45. Effects of temperature on ion transport in C-A-S-H gel nanopores: insights from molecular dynamics simulations10.1007/s10853-022-07796-3 ↗
46. Molecular structure, dynamics, and mechanical behavior of sodium aluminosilicate hydrate (NASH) gel at elevated temperature: a molecular dynamics study10.1039/C8CP03411G ↗
47. Structural and mechanical properties of geopolymers made of aluminosilicate powder with different SiO2/Al2O3 ratio: molecular dynamics simulation and microstructural experimental study10.1016/j.conbuildmat.2019.117935 ↗
48. Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios10.1016/j.cemconcomp.2017.01.014 ↗
49. Structure, reactivity, and mechanical properties of sustainable geopolymer material: a reactive molecular dynamics study10.3389/fmats.2020.00069 ↗
50. Evolution of local structure in geopolymer gels: an in situ neutron pair distribution function analysis10.1111/j.1551-2916.2011.04515.x ↗
51. Insights on the chloride adsorption stability in cement mortar under current field and sulfate attack: from experiments to molecular dynamics simulation10.1016/j.cemconcomp.2023.105375 ↗
52. Atomic-level investigation into the transport of NaCl solution in porous cement paste: the effects of pore size and temperature
53. Assessing the unsaturated transport and adsorption properties of ions in nanopores of realistic hydrated-calcium-silicate gel using molecular dynamics simulations10.1016/j.commatsci.2023.112121 ↗
54. Use of bench-top NMR to measure the density, composition and desorption isotherm of C-S-H in cement paste10.1016/j.micromeso.2013.01.032 ↗
55. Multi-scale study water and ions transport in the cement-based materials: from molecular dynamics to random walk10.1016/j.micromeso.2021.111330 ↗
56. State and role of water confined in cement and composites modified with metakaolin and additives10.1016/j.molliq.2023.122716 ↗
57. Realistic atomic structure of fly ash-based geopolymer gels: insights from molecular dynamics simulations10.1063/1.5121519 ↗
58. Nanoscale insights into the interfacial characteristics and mechanical behavior of natural zeolite cement composites10.1016/j.conbuildmat.2026.146013 ↗
59. Molecular dynamics modeling of the structure, dynamics, energetics and mechanical properties of cement-polymer nanocomposite10.1016/j.compositesb.2018.12.142 ↗
60. Molecular dynamics study on calcium silicate hydrate subjected to tension loading and water attack: structural evolution, dynamics degradation and reactivity mechanism10.1039/C7CP08634B ↗
61. Evolution of local structure in geopolymer gels: anin situneutron pair distribution function analysis10.1111/j.1551-2916.2011.04515.x ↗
62. Recent advances in molecular dynamics simulation of the N-A-S-H geopolymer system: modeling, structural analysis, and dynamics10.1016/j.conbuildmat.2020.122196 ↗
63. Molecular dynamics study on the nucleation characteristics of mixed Na2SO4/K2SO4 solution in supercritical water10.1021/acs.iecr.3c04164 ↗
64. Ab initio theory and modeling of water10.1073/pnas.1712499114 ↗
65. Multi-scale experimental investigation on the influence of Ca content and Si/Al molar ratios on mechanical properties of metakaolin-slag based geopolymers10.1016/j.conbuildmat.2026.145612 ↗
66. Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive10.1016/j.matdes.2013.07.018 ↗
67. High performance cementless composites from alkali activated GGBFS10.1016/j.conbuildmat.2020.120222 ↗
68. Hydration of sodium, potassium, and chloride ions in solution and the concept of structure maker/breaker10.1021/jp075913v ↗
69. Effect of salt solution on the mechanical behaviours of geopolymer concrete under dry-wet cycles10.1155/2022/9120821 ↗
70. Durability of low‑calcium fly ash based geopolymer concrete culvert in a saline environment10.1016/j.cemconres.2017.07.010 ↗