journal article·2026-09

Multi-scale interfacial characteristics and coating behavior of asphalt on high-titanium heavy slag aggregate

Wei Wang, Junan Shen, Peng Guo, Jie Wang, Liangbin Qin, Qiang Luo, Yuqing Zeng, Ningjun Wang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (43)

Show source-provided references
1. A review of the use of recycled solid waste materials in asphalt pavements10.1016/j.resconrec.2007.02.002 ↗
2. Waste by-products in asphalt concrete pavement construction: a review10.3390/ma18174092 ↗
3. Recent progress of efficient utilization of titanium-bearing blast furnace slag10.1007/s12613-021-2323-1 ↗
4. Application of pre-wetted high titanium heavy slag aggregate in cement concrete10.3390/ma15030831 ↗
5. High titanium heavy slag powder as a sustainability filler and its influence on the performance of asphalt mortar10.1016/j.jmrt.2023.07.037 ↗
6. Feasibility of industrial high-titanium heavy slag for thermally induced self-healing asphalt pavement materials: road performance and thermal conductivity analysis10.3390/buildings16071333 ↗
7. Feasibility of high titanium heavy slag used as aggregates for asphalt mixtures10.1016/j.jclepro.2023.137332 ↗
8. Review of interfacial adhesion between asphalt and aggregate based on molecular dynamics10.1016/j.conbuildmat.2022.129642 ↗
9. Molecular dynamics simulation of the bitumen-aggregate system and the effect of simulation details10.1016/j.conbuildmat.2021.122886 ↗
10. Morphological characteristics of aggregates and their influence on the performance of asphalt mixture10.1016/j.conbuildmat.2018.07.124 ↗
11. Asphalt-aggregates interface interaction: Correlating oxide composition and morphology with adhesion10.1016/j.conbuildmat.2024.139317 ↗
12. EAF slag in asphalt mixes: a brief review of its possible re-use10.1016/j.resconrec.2016.12.009 ↗
13. Study of adhesion between steel slag aggregates and bitumen taking into consideration internal factors influencing moisture damage10.1016/j.conbuildmat.2023.130369 ↗
14. Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact10.1016/j.conbuildmat.2008.05.009 ↗
15. Utilization of solid waste materials as alternative fillers in asphalt mixes: A review10.1016/j.conbuildmat.2019.117271 ↗
16. Adhesive behavior and pavement performance of asphalt mixtures incorporating red mud as a filler substitute10.1016/j.conbuildmat.2021.123855 ↗
17. A review on utilization of steel slag in hot mix asphalt
18. The use of steel slags in asphalt pavements: A state-of-the-art review10.3390/su15118817 ↗
19. Study on the adhesion property between asphalt binder and aggregate: a state-of-the-art review10.1016/j.conbuildmat.2020.119474 ↗
20. Correlation between bond strength and surface free energy parameters of asphalt binder-aggregate system10.1016/j.conbuildmat.2021.124487 ↗
21. Interface interaction between high viscosity asphalt and aggregate: A multi-scale study based on experiments and molecular dynamics simulation10.1016/j.fuel.2023.130045 ↗
22. Identification of interfacial transition zone in asphalt concrete based on nano-scale metrology techniques10.1016/j.matdes.2017.05.015 ↗
23. Review of bonding behavior, mechanisms, and characterization approach in bituminous materials under different conditions
24. Evaluation of the factors affecting interfacial bonding strength and failure modes between bitumen and minerals10.1016/j.conbuildmat.2025.142900 ↗
25. Nano-mechanical characterization of mastic, aggregate, and interfacial zone in asphalt composites10.1520/JTE20120178 ↗
26. Investigation of the wet and thermal conditions effect on the micro-scale characteristics of interfacial transition zone of porous asphalt mixture10.3390/coatings13030566 ↗
27. Stiffening and toughening of asphalt mastic induced by bitumen–mineral selective molecular adsorption and nanostructural reconstruction10.3390/su15054398 ↗
28. Chemical compositions of improved model asphalt systems for molecular simulations10.1016/j.fuel.2013.07.012 ↗
29. Influence of the interfacial composition on the adhesion between aggregates and bitumen: Investigations by EDX, XPS and peel tests10.1016/j.ijadhadh.2011.01.005 ↗
30. Study on interfacial adhesion between castor oil-based bio-asphalt and aggregate
31. Wetting model of rough solid surfaces and the effect of aggregate properties on epoxy resin binder–aggregate interface wetting10.1016/j.conbuildmat.2023.132251 ↗
32. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
33. Evaluation of moisture susceptibility of asphalt mixes containing RAP and different types of aggregates and asphalt binders using the surface free energy method10.1016/j.conbuildmat.2014.09.042 ↗
34. Measuring the effect of moisture on asphalt–aggregate bond with the bitumen bond strength test10.3141/2209-09 ↗
35. Use of tricalcium silicate to evaluate asphalt absorption on steel slag: Atomic simulation and micro-scale characterization10.1016/j.measurement.2021.109224 ↗
36. Study of cohesion and adhesion properties of asphalt concrete with molecular dynamics simulation10.1016/j.commatsci.2015.10.024 ↗
37. Effects of aggregate mineral surface anisotropy on asphalt-aggregate interfacial bonding using molecular dynamics (MD) simulation10.1016/j.conbuildmat.2019.07.178 ↗
38. Ionic-covalent transition in titanium oxides10.1103/PhysRevB.50.13974 ↗
39. Gan, X. (2017). Surface characteristics and adhesion evaluation of aggregates and asphalt. Doctoral dissertation, Chang’an University, Xi’an, China. (in Chinese).
40. Analysis of adhesion between asphalt and aggregate based on the infiltration parameters and surface energy theory
41. Revelation and characterization of selective absorption behavior of bitumen to basic oxygen furnace slag10.1016/j.conbuildmat.2020.119210 ↗
42. Influence of iron tailing filler on rheological behavior of asphalt mastic10.1016/j.conbuildmat.2022.129047 ↗
43. Molecular dynamics simulation of adhesion at the asphalt-aggregate interface: A review