A novel strategy to improve the early age strength of high-volume fly ash cement pastes: The combination of seawater and calcined layered double hydroxides as an innovative chemical activator
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (80)
Show source-provided references
1. Utilization of carbide slag-granulated blast furnace slag system by wet grinding as low carbon cementitious materials10.1016/j.conbuildmat.2020.118763 ↗
2. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
3. On the significance of interfacial chemistry on the strength of fly ash-cement composites10.1016/j.cemconres.2021.106619 ↗
4. Reactivity of supplementary cementitious materials (SCMs) in cement blends10.1016/j.cemconres.2019.105799 ↗
5. A comparative study of self-consolidating concretes incorporating high-volume natural pozzolan or high-volume fly ash10.1016/j.conbuildmat.2013.11.065 ↗
6. Predicting chloride ingression in concrete containing different SCMs based on chloride binding and electrical resistivity10.1016/j.conbuildmat.2024.134928 ↗
7. Durability of ternary blends containing high calcium fly ash and slag against sodium sulphate attack10.1016/j.conbuildmat.2013.11.080 ↗
8. Activation of portland cement blended with high volume of fly ash using Na2SO410.1016/j.cemconcomp.2019.103417 ↗
9. Effect of accelerated curing regimes on high volume Fly ash mixtures in precast manufacturing plants10.1016/j.cemconres.2019.105913 ↗
10. Effects of water/powder ratio, mixing ratio of fly ash, and curing temperature on pozzolanic reaction of fly ash in cement paste10.1016/S0008-8846(00)00441-5 ↗
11. The relevance of ultrafine fly ash properties and mechanical properties in its fly ash-cement gelation blocks via static pressure forming10.1016/j.conbuildmat.2018.08.035 ↗
12. Properties improvement of fly ash cenosphere modified cement pastes using nano silica10.1016/j.cemconcomp.2017.04.008 ↗
13. Evaluation of activated high volume fly ash systems using Na2SO4, lime and quicklime in mortars with high loss on ignition fly ashes10.1016/j.conbuildmat.2016.10.076 ↗
14. A multiscale study on gel composition of hybrid alkali-activated materials partially utilizing air pollution control residue as an activator10.1016/j.cemconcomp.2022.104856 ↗
15. Hydration of high-volume fly ash cement pastes10.1016/S0958-9465(00)00044-5 ↗
16. Chemical activation of hybrid binders based on siliceous fly ash and Portland cement10.1016/j.cemconcomp.2015.11.003 ↗
17. The influence of sodium and potassium hydroxide on volume changes in cementitious materials10.1016/j.cemconres.2012.08.012 ↗
18. Effects of alkali addition on the mechanical properties and durability of concrete10.1016/j.cemconres.2004.05.007 ↗
19. Hydration and microstructure of calcined hydrotalcite activated high-volume fly ash cementitious composite10.1016/j.cemconcomp.2021.104213 ↗
20. Understanding strengthening mechanisms of Ca-LDO on cementitious materials10.1016/j.cemconcomp.2023.105340 ↗
21. Seismic optimization design and application of civil engineering structures integrated with building robot system technology10.28991/HIJ-2024-05-04-017 ↗
22. The role of seawater in interaction of slag and silica fume with cement in low water-to-binder ratio pastes at the early age of hydration10.1016/j.conbuildmat.2018.07.091 ↗
23. Characterization of the mechanical properties of eco-friendly concrete made with untreated sea sand and seawater based on statistical analysis10.1016/j.conbuildmat.2019.117339 ↗
24. Effect of fly ash on compressive strength and chloride binding of seawater-mixed mortars
25. Combined effect of metakaolin and sea water on performance and microstructures of concrete10.1016/j.conbuildmat.2014.10.023 ↗
26. Multiscale investigations on hydration mechanisms in seawater OPC paste10.1016/j.conbuildmat.2018.10.010 ↗
27. Influence of seawater on the morphological evolution and the microchemistry of hydration products of tricalcium silicates (C3S)10.1021/acssuschemeng.0c04440 ↗
28. Investigation on early-age hydration, mechanical properties and microstructure of seawater sea sand cement mortar10.1016/j.conbuildmat.2020.118776 ↗
29. The effects of seawater on the hydration, microstructure and strength development of Portland cement pastes incorporating colloidal silica10.1007/s13204-019-00993-8 ↗
30. Hydration behavior and chloride ingress in cement mortar incorporating a novel core@shell admixture10.1016/j.cemconcomp.2022.104461 ↗
31. Chloride removal and corrosion inhibitions of nitrate, nitrite-intercalated MgAl layered double hydroxides on steel in saturated calcium hydroxide solution10.1016/j.clay.2018.07.023 ↗
32. Synthesis of hydrotalcite-like compounds and their physico-chemical properties10.1016/0168-7336(88)80089-5 ↗
33. Enhancing corrosion resistance of epoxy coating on steel reinforcement by aminobenzoate intercalated layered double hydroxides10.1016/j.porgcoat.2019.05.023 ↗
34. Adsorption–desorption characteristics of nitrate, phosphate and sulfate on Mg–Al layered double hydroxide10.1016/j.clay.2013.05.002 ↗
35. Chloride binding of synthetic Ca–Al–NO3 LDHs in hardened cement paste10.1016/j.conbuildmat.2015.05.047 ↗
36. Using layered double hydroxides and anion exchange resin to improve the mechanical properties and chloride binding capacity of cement mortars10.1016/j.conbuildmat.2020.122002 ↗
37. Controlling the reaction kinetics of sodium carbonate-activated slag cements using calcined layered double hydroxides10.1016/j.cemconres.2015.11.012 ↗
38. A UAV based concrete crack detection and segmentation using 2-stage convolutional network with transfer learning10.28991/HIJ-2024-05-03-010 ↗
39. Chloride binding by calcined layered double hydroxides and alumina-rich cementitious materials in mortar mixed with seawater and sea sand10.1016/j.conbuildmat.2021.123493 ↗
40. Effect of LiAl-layered double hydroxides on hydration of calcium sulfoaluminate cement at low temperature10.1016/j.conbuildmat.2019.07.251 ↗
41. A review on fly ash characteristics – towards promoting high volume utilization in developing sustainable concrete10.1016/j.jclepro.2017.01.114 ↗
42. Effect of SiO2-modified calcined layered double hydroxides on the properties of cement-based material: crucial role of the phase-transformation induced by alkaline pore solution10.1016/j.cemconres.2024.107465 ↗
43. Effect of non-class fly ash on strength properties of concrete10.28991/CEJ-2024-010-03-02 ↗
44. Influence of gypsum on the residual properties of fly ash-slag-based alkali-activated concrete
45. Particle shape, crystallinity, and degree of polymerization of fly ash via combined SEM-EDS and Raman spectroscopy10.1016/j.cemconres.2024.107612 ↗
46. Rietveld quantitative phase analysis of Yeelimite-containing cements10.1016/j.cemconres.2012.03.018 ↗
47. Nanoindentation on micromechanical properties and microstructure of geopolymer with nano-SiO2 and nano-TiO210.1016/j.cemconcomp.2020.103883 ↗
48. Active protection coatings with layered double hydroxide nanocontainers of corrosion inhibitor10.1016/j.corsci.2009.10.020 ↗
49. Zn–Al layered double hydroxides as chloride nanotraps in active protective coatings10.1016/j.corsci.2011.10.003 ↗
50. Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications10.1016/j.conbuildmat.2013.06.049 ↗
51. Effect of nano-CaCO3 slurry on the mechanical properties and micro-structure of concrete with and without fly ash10.1016/j.compositesb.2017.02.030 ↗
52. Towards a two-step assessment of the chloride ingress behaviour of new cementitious binders10.1016/j.cemconres.2024.107594 ↗
53. Critical chloride content in reinforced concrete — A review10.1016/j.cemconres.2009.08.006 ↗
54. Durability of concrete — degradation phenomena involving detrimental chemical reactions10.1016/j.cemconres.2007.09.015 ↗
55. Chloride resistance of concrete and its binding capacity – Comparison between experimental results and thermodynamic modeling10.1016/j.cemconcomp.2009.08.001 ↗
56. Intrinsic chloride ion transport behavior in porous space of pure C-S-H10.1016/j.cemconres.2024.107506 ↗
57. Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement10.1016/j.cemconres.2017.05.015 ↗
58. Development of cementless ultra-high performance fly ash composite (UHPFC) using nucleated pozzolanic reaction of low Ca fly ash10.1016/j.cemconcomp.2022.104650 ↗
59. Dissolution theory applied to the induction period in alite hydration10.1016/j.cemconres.2010.01.012 ↗
60. Mechanism of hydroxylation of metal oxide surfaces10.1006/jcis.2001.7864 ↗
61. New insight into the combined effect of aluminum sulfate and triethanolamine on cement hydration10.1016/j.cemconres.2024.107547 ↗
62. Effect of the prepared barium@hydrogel capsule on chloride ion binding of Portland cement paste10.1016/j.compositesb.2022.110314 ↗
63. Autogenous formation and smart behaviors of nitrite- and nitrate-intercalated layered double hydroxides (LDHs) in Portland cement-metakaolin-dolomite blends10.1016/j.cemconres.2020.106267 ↗
64. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
65. Pozzolanic reaction on alkali-activated Class F fly ash for ambient condition curable structural materials10.1016/j.conbuildmat.2019.05.129 ↗
66. Characterization of morphology and hydration products of high-volume fly ash paste by monochromatic scanning x-ray micro-diffraction (μ-SXRD)10.1016/j.cemconres.2014.03.001 ↗
67. Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays10.1016/j.cemconres.2016.02.015 ↗
68. Quantification methods for chloride binding in Portland cement and limestone systems10.1016/j.cemconres.2019.105864 ↗
69. Raman spectroscopic investigation of Friedel's salt10.1016/j.cemconcomp.2017.11.023 ↗
70. Understanding the early reaction and structural evolution of alkali activated slag optimized using K-A-S-H nanoparticles with varying K2O/SiO2 ratios10.1016/j.compositesb.2020.108311 ↗
71. Effect of alkali-hydroxide on hydration kinetics and microstructure of high-volume fly ash blended cement pastes10.1016/j.cemconres.2024.107641 ↗
72. Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete10.1016/j.cemconres.2017.02.031 ↗
73. Roles of CLDHs and TEA on portland cement mortar/paste: strength, hydration and chloride binding10.1016/j.conbuildmat.2022.126325 ↗
74. Surface complexation reactions of inorganic anions on hydrotalcite-like compounds10.1016/j.jcis.2012.06.072 ↗
75. Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars
76. Effect of seawater as mixing water on the hydration behaviour of tricalcium aluminate10.1016/j.cemconres.2021.106565 ↗
77. U. Mäder, Stability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions10.1016/j.cemconres.2021.106674 ↗
78. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO210.1016/j.cemconres.2005.07.004 ↗
79. The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete10.1016/j.cemconres.2019.01.004 ↗
80. Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions10.1016/j.cemconres.2014.10.015 ↗