Influence of binder composition on micro- and macro-properties of HSHDCC made with fine silica sand
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (88)
Show source-provided references
1. A review on ultra high performance concrete: part I. Raw materials and mixture design10.1016/j.conbuildmat.2015.10.088 ↗
2. Experimental investigation and prediction of elastic modulus of ultra-high performance concrete (UHPC) based on its composition10.1016/j.cemconres.2020.106241 ↗
3. Sustainable lightweight engineered cementitious composites using limestone calcined clay cement (LC3)10.1016/j.compositesb.2022.110183 ↗
4. Discontinuous micro-fibers as intrinsic reinforcement for ductile engineered cementitious composites (ECC)10.1016/j.compositesb.2020.107741 ↗
5. Chloride migration in cement mortars with ultra-low water to binder ratio10.1016/j.cemconcomp.2021.103974 ↗
6. A review of the mechanical and durability properties of strain hardening cement-based composite (SHCC)
7. Design, production, and properties of high-strength high-ductility cementitious composite (HSHDCC): a review10.1016/j.compositesb.2022.110258 ↗
8. Development of high strength high ductility concrete
9. The durability of alkali-activated materials in comparison with ordinary portland cements and concretes: a review10.1016/j.eng.2019.08.019 ↗
10. Effect of pre-saturated lightweight sand on material properties of eco-friendly lightweight cementitious composites
11. An investigation on the performance enhancement and cost reduction of engineered cementitious composites developed with local PVA and PET fibers
12. Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40 MPa to 120 MPa10.1016/j.cemconcomp.2019.01.001 ↗
13. Design of ultra-high strength, ultra-high ductility cementitious composites (UHS-UHDCC)10.1016/j.conbuildmat.2021.125914 ↗
14. Micro-mechanical model for ultra-high strength and ultra-high ductility cementitious composites (UHS-UHDCC)10.1016/j.conbuildmat.2020.120668 ↗
15. Development of engineered cementitious composites (ECC) using artificial fine aggregates10.1016/j.conbuildmat.2021.124742 ↗
16. Tailoring strain-hardening behavior of high-strength engineered cementitious composites ( ECC) using hybrid silica sand and artificial geopolymer aggregates10.1016/j.matdes.2022.110876 ↗
17. Tensile over-saturated cracking of Ultra-High-Strength engineered cementitious composites (UHS-ECC) with artificial geopolymer aggregates10.1016/j.cemconcomp.2022.104896 ↗
18. Tailoring of pre-existing flaws in ECC matrix for saturated strain hardening
19. Mechanism study of crack propagation in river sand engineered cementitious composites (ECC)10.1016/j.cemconcomp.2022.104434 ↗
20. Development of high-strength and high-ductility ECC with saturated multiple cracking based on the flaw effect of coarse river sand10.1061/(ASCE)MT.1943-5533.0003405 ↗
21. The connection between microscopic and macroscopic properties of ultra-high strength and ultra-high ductility cementitious composites (UHS-UHDCC)10.1016/j.compositesb.2018.11.062 ↗
22. Tensile properties of PVA and PE fiber reinforced engineered cementitious composites containing coarse silica sand
23. Quantitative characterization of the transition zone in high strength concretes10.1680/adcr.1988.1.4.230 ↗
24. Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete – a review10.1016/j.compositesb.2019.107456 ↗
25. The mechanical properties and microstructure of ultra-high-performance concrete containing various supplementary cementitious materials
26. Synergistic effects of silica fume and slag on the microstructure and mechanical behaviors of ultra-high-strength and high-ductility cementitious composites10.1016/j.conbuildmat.2022.130169 ↗
27. Effect of Fly ash on tensile properties of ultra-high performance fiber reinforced cementitious composites (UHP-FRCC)
28. Mechanical properties and self-healing evaluation of strain-hardening cementitious composites with high volumes of hybrid pozzolan materials10.1016/j.compositesb.2017.09.005 ↗
29. Rheological control in production of engineered cementitious composites
30. Determination of fracture toughness of nano-scale cement composites using simulated nanoindentation technique10.1016/j.tafmec.2019.102275 ↗
31. Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of Fly ash by rice husk ash10.1016/j.cemconres.2020.106200 ↗
32. Preparation and characterization of ultra-high-strength and ultra-high-ductility cementitious composites incorporating waste clay brick powder10.1016/j.jclepro.2021.127813 ↗
33. Fiber-bridging constitutive law of engineered cementitious composites10.3151/jact.6.181 ↗
34. BN. A J-integral method for calculating steady-state matrix cracking stresses in composites10.1016/0167-6636(88)90011-7 ↗
35. Significance of the particle size distribution modulus for strain-hardening-ultra-high performance concrete (SH-UHPC) matrix design10.1016/j.conbuildmat.2019.117423 ↗
36. Influence of silica fume on performance of High-Strength geopolymer
37. Method for mixture design of concrete with multiple performance requirements SHI
38. Improving the workability and rheological properties of engineered cementitious composites using factorial experimental design10.1016/j.compositesb.2012.08.015 ↗
39. Influence of matrix flowability, fiber mixing procedure, and curing conditions on the mechanical performance of HTPP-ECC10.1016/j.compositesb.2013.12.076 ↗
40. Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers10.1016/j.conbuildmat.2017.10.040 ↗
41. Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks
42. Insight into the effect of sand size, sand-to-binder ratio, and water-to-binder ratio on micro- and macro-mechanical properties of HS-ECC10.1016/j.cemconcomp.2025.106285 ↗
43. ASTM E399. Standard test method for linear-elastic plane-strain fracture toughness KIC of metallic materials. USA: 2012.
44. Chinese national standard. Test methods of mechanical properties of mortar for ferrocement,GB/T 17671–2020, China, Beijing 2008 (in Chinese).
45. Direct assessment of tensile stress-crack opening behavior of strain hardening cementitious composites (SHCC)10.1016/j.cemconres.2012.03.006 ↗
46. Experimental determination of crack-bridging constitutive relations of hybrid-fiber Strain-Hardening cementitious composites using digital image processing10.1016/j.conbuildmat.2018.03.185 ↗
47. A strain-hardening cementitious composites with the tensile capacity up to 810.1016/j.conbuildmat.2017.01.060 ↗
48. Novel experimental method to determine crack-bridging constitutive relationship of SHCC using digital image processing
49. An improved image processing method for assessing multiple cracking development in strain hardening cementitious composites (SHCC)10.1016/j.cemconcomp.2016.10.005 ↗
50. Pore-size resolved water vapor adsorption kinetics of White cement mortars as viewed from proton NMR relaxation10.1016/j.cemconres.2017.12.002 ↗
51. Investigation of early hydration dynamics and microstructural development in ordinary portland cement using 1H NMR relaxometry and isothermal calorimetry10.1016/j.cemconres.2016.01.007 ↗
52. Effects of water to binder ratio on the chloride binding behaviour of artificial seawater cement paste blended with metakaolin and silica fume10.1016/j.conbuildmat.2022.129110 ↗
53. Orientation distribution of polyvinyl alcohol fibers and its influence on bridging capacity and mechanical performances for high ductility cementitious composites10.1016/j.conbuildmat.2020.118491 ↗
54. Engineered cementitious composites (ECC) - tailored composites through micromechanical modeling
55. Tensile response of UHPFRC under very low strain rates and low temperatures10.1016/j.cemconres.2020.106067 ↗
56. Uniaxial tensile behavior of ultra-high performance fiber-reinforced concrete (UHPFRC): experiments and modeling10.1016/j.compstruct.2020.113433 ↗
57. The adiabatic compressibility and structural parameters of hydration of strong electrolytes
58. Investigation of the influence of curing temperature and silica fume content on setting and hardening process of the blended cement paste by an improved ultrasonic apparatus10.1016/j.conbuildmat.2012.01.011 ↗
59. Role of silica fume in the direct tensile strength of cement-based materials10.1007/BF02481516 ↗
60. Effects of fiber dispersion and flaw size distribution on the composite properties of PVA-ECC
61. Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content10.1016/j.cemconres.2019.105786 ↗
62. Liu · 2020
63. The hydration and microstructure of ultra high-strength concrete with cement-silica fume-slag binder10.1016/j.cemconcomp.2015.04.013 ↗
64. Abou-Zeid M., Fowler D.W., Nawy E.G., et al. 224R-1: Control of cracking in concrete structures. vol. 224. 2001.
65. Self-healing cement concrete composites for resilient infrastructures: a review10.1016/j.compositesb.2020.107892 ↗
66. Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): assessment and modeling of crack characteristics10.1016/j.cemconres.2020.106292 ↗
67. Exploring the nonlinear behavior of flow through cracked concrete by water permeability test10.1016/j.cemconcomp.2024.105557 ↗
68. High-strength high-ductility seawater sea-sand engineered cementitious composites: mechanical properties, cracking behavior and micro-mechanics
69. Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model10.1016/j.conbuildmat.2007.05.014 ↗
70. Assessment on the heterogeneity and roughness of fracture surface of steel fiber reinforced concrete10.1016/j.conbuildmat.2024.137025 ↗
71. Determination of fracture toughness of hydrated calcium silicate by nanoindentation
72. The determination of the elastic field of an ellipsoidal inclusion, and related problems
73. Nanoindentation characteristics of alkali-activated aluminosilicate materials10.1016/j.cemconcomp.2010.10.005 ↗
74. Modeling the linear elastic properties of portland cement paste10.1016/j.cemconres.2005.05.001 ↗
75. The nano-mechanical signature of ultra high performance concrete by statistical nanoindentation techniques10.1016/j.cemconres.2008.09.002 ↗
76. Design of engineered cementitious composites for ductile seismic resistant elements.
77. Toughening and crack prevention of modern concrete: mechanisms and applications
78. Effect of ettringite seed crystals on the properties of calcium sulphoaluminate cement10.1016/j.conbuildmat.2019.02.130 ↗
79. Ettringite-based binder from ladle slag and gypsum – the effect of citric acid on fresh and hardened state properties10.1016/j.cemconres.2019.105800 ↗
80. On the use of limestone calcined clay cement (LC3) in high-strength strain-hardening cement-based composites (HS-SHCC10.1016/j.cemconres.2021.106421 ↗
81. Mehta · 2006
82. Failure evolution and fiber toughing mechanism of ultra-high performance concrete under uniaxial compression
83. The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis10.1016/j.compositesb.2014.02.011 ↗
84. Measuring and modifying interface properties of PVA fibers in ECC matrix10.1061/(ASCE)0899-1561(2001)13:6(399) ↗
85. Rate-dependent tensile properties of ultra-high performance engineered cementitious composites (UHP-ECC)10.1016/j.cemconcomp.2018.07.016 ↗
86. Effect of polyethylene fiber content on physical and mechanical properties of engineered cementitious composites10.1016/j.conbuildmat.2020.118917 ↗
87. University of michigan
88. Review and outlook on durability of engineered cementitious composite (ECC)10.1016/j.conbuildmat.2021.122719 ↗