journal article·2025-11

The effect of sulfur and lead on the corrosion of steam generator tubes made of alloy 690 thermally treated exposed to a wet steam environment at 320 °C

Estelle Lagardère, Adil Shaik, Suraj Persaud, Nicolas Huin, Ian de Curières, Lydia Laffont

Corrosion Science· Volume 256
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Corrosion issues in pressurized water reactor (PWR) systems
2. Environmentally-assisted degradation of structural materials in water cooled nuclear reactors – an introduction
3. Quantitative assessment of submodes of stress corrosion cracking on the secondary side of steam generator tubing in pressurized water reactors: Part 1
4. Quantitative assessment of submodes of stress corrosion cracking on the secondary side of steam generator tubing in pressurized water reactors: Part 2
5. Corrosion of SG tube alloys in typical secondary side local chemistries derived from operating experience
6. Failure Analysis of Steam Generator Tubes
7. Chapter 8: Environmental degradations in PWR steam generators
8. Aublant · Curières Lead induced corrosion sg tubing materials Asheville · 2013
9. Theoretical study of the Pb adsorption on Ni, Cr, Fe surfaces and on Ni based alloys10.1016/j.apsusc.2017.07.176 ↗
10. B.T. Lu, B. Peng, J.L. Luo, Y.C. Lu, Passivity of nuclear steam generator tube alloy in lead- contaminated crevice chemistries with different pH, in: Whistler, B.C. (Canada), 2007.
11. Electrochemical aspects of stress corrosion cracking of Ni-Cr-Fe alloys in acid sulfate solutions relevant to nuclear steam generators10.1149/05321.0003ecst ↗
12. Quantitative assessment of submodes of stress corrosion cracking on the secondary side of steam generator tubing in pressurized water reactors: Part 3
13. An electrochemical study assisting the interpretation of acid sulfate stress corrosion cracking of NiCrFe alloys10.1016/j.corsci.2014.10.033 ↗
14. Corrosion des alliages de nickel et des aciers inoxydables en milieux REP pollués ou confinés10.51257/a-v1-bn3756 ↗
15. Sulfur induced corrosion (SIC) mechanism of steam generator (SG) tubing at micro scale: a critical review10.1016/j.matchemphys.2019.05.056 ↗
16. Delaunay · Predict. Sulfur Speciat. Second. Circuit Cond. Influ. Magn. hydrazine 275°C. Paris · 2012
17. Sulphidation properties of chromium and chromium-containing alloys at high temperatures10.1016/0025-5416(87)90360-0 ↗
18. Role of adsorbed sulphur in the dissolution and passivation of nickel and nickel-sulphur alloys10.1016/0378-5963(79)90060-6 ↗
19. The sulphur-induced breakdown of the passive film and pitting studied on nickel and nickel alloys10.1016/0010-938X(89)90099-1 ↗
20. Potential-pH diagrams for sulfur and oxygen adsorbed on chromium in water10.1149/1.1837645 ↗
21. Potential pH diagrams for sulfur and oxygen adsorbed on nickel in water at 25 and 300°C10.1149/1.2221604 ↗
22. The role of thiosulfates in the pitting corrosion of Fe-17Cr alloys in neutral chloride solution: electrochemical and XPS study10.1016/S0010-938X(97)81158-4 ↗
23. Corrosion in H2/H2S mixtures of a Ni77Cr16Fe7 alloy previously covered with an external Cr203 layer10.1007/BF00540453 ↗
24. Evaluation of the role of impurities present in the secondary side sludge on the corrosion and stress corrosion damage of steam generator tubes of pressurized water reactor
25. The effects of heat treatments on the M23C6 carbide evolution and grain boundary serration in alloy 690
26. Huin · Eval. role impurities Present Second. Side.. Sludges Corros. Damage Steam. Gener. AREVA · 2016
27. Alloy 690 Improvement Factor Update
28. Mestre-Rinn · Mod. èLe. Local De. Corros. Sous contrainte Inter. Des. Alliages De. Nickel Expo. éS. Aux. zones Confinées du Circuit Second. Des. R. éActeurs à eau Sous Press. · 2023
29. La corrosion côté secondaire des tubes de générateurs de vapeur. EDF – FRAMATOME – CEA, J. M. Gras, 1996.
30. I. de Curières, F. Vaillant, B. Cyrus, M.-C. Meunier, Lead Pollution of the Secondary Side of Steam Generators: an Overview, in: Avignon, France, 2010.
31. Oxide layer growth on nickel-base alloy surfaces in high temperature water and in O2 studied by ToF-SIMS with isotopic tracers10.1016/j.corsci.2018.10.009 ↗
32. Kinetics of passivation of a nickel-base alloy in high temperature water10.1533/9781845693466.1.44 ↗
33. L. Marchetti, Corrosion généralisée des alliages à base nickel en milieu aqueux à haute température: Apport à la compréhension des mécanismes, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2007, 〈https://theses.hal.science/tel-00991918〉.
34. Multi-scale characterization of the inner surface of as-received steam generator tubes and correlation with the Ni release in primary water10.1016/j.corsci.2023.111205 ↗
35. Influence of the transient conditions on release of corrosion products and oxidation of alloy 690 tubes during pressurized water reactor restart after steam generators replacement10.1016/j.jnucmat.2020.152562 ↗
36. Potential-pH diagrams for Ni-Cr-Fe alloys and Pb adsorption on Ni-Cr-Fe alloys surfaces in water at 25°C and high temperature (250–350°C)10.1149/2.1291807jes ↗
37. Potential-pH diagrams for Pb adsorption on Cu and Ni surfaces at 25°C and 300°C10.1149/2.017303jes ↗
38. Potential-pH diagrams for Pb adsorption on Ni, Fe and Cr surfaces at 25 and 300°C10.1149/2.0931704jes ↗
39. Evidence for a corrosion slot/tunneling mechanism for lead-induced transgranular SCC of alloy 690 in PbO + 10% NaOH solution
40. Effect of stress and surface finish on Pb-caustic SCC of alloy 690TT10.1016/j.corsci.2021.109462 ↗
41. Secondary side corrosion of SG tube alloys in typical secondary side chemistries, 18th Environmental Degradation meeting
42. Thermodynamic basis of antagonistic effects of oxygen and sulphur on corrosion of passivating metals10.1016/j.corsci.2021.109526 ↗
43. Advanced microstructural characterization of transgranular Pb-caustic SCC in alloy 690TT10.1016/j.corsci.2022.110461 ↗
44. Lead-induced stress corrosion cracking (PbSCC) initiation in alloy 690TT in caustic environment10.1016/j.corsci.2022.110475 ↗
45. Influence of Pb++ ions on the dissolution and passivation of nickel and Ni–21Cr in acidic solutions10.1016/j.corsci.2005.04.013 ↗
46. Interaction of oxygen with lead-precovered nickel(100)10.1016/S0039-6028(98)00218-0 ↗