Dynamic globularization mechanism and deformation behavior of Ti2AlNb alloys during lower electric current density-assisted compression
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. A new ordered orthorhombic phase in a Ti2AlNb alloy10.1016/0001-6160(88)90141-1 ↗
2. The intermetallic Ti2AlNb10.1016/S0079-6425(97)00012-1 ↗
3. The microstructural evolution in Ti-AI-Nb O + Bcc orthorhombic alloys10.1007/s11661-999-0240-4 ↗
4. Microstructures and tensile properties of Ti2AlNb and Mo-modified Ti2AlNb alloys fabricated by hot isostatic pressing10.1016/j.msea.2020.139043 ↗
5. Microstructure analysis on enhancing mechanical properties at 750°C and room temperature of Ti-22Al-24-Nb-0.5Mo alloy tubes fabricated by hot gas forming10.1016/j.jallcom.2019.03.040 ↗
6. Dual structure O + B2 for enhancement of hardness in furnace-cooled Ti2AlNb-based alloys by powder metallurgy10.1016/j.apt.2017.04.009 ↗
7. Formation of submicrocrystalline structure in the titaniumj alloy VT8 and its influence on mechanical properties10.1007/BF00354692 ↗
8. Production of submicrocrystalline structure in large-scale Ti-6Al-4V billet by warm severe deformation processing10.1016/j.scriptamat.2004.08.018 ↗
9. Enhanced superplasticity utilizing dynamic globularization of Ti–6Al–4V alloy10.1016/j.msea.2008.05.001 ↗
10. Dynamic globularization kinetics of a powder metallurgy Ti–22Al–25Nb alloy with initial lamellar microstructure during hot compression10.1016/j.jallcom.2014.08.034 ↗
11. Dynamic globularization behavior of O-phase lamellae in Ti-22Al-25Nb (at%) alloy during deformation at elevated temperatures10.1016/S1875-5372(18)30081-X ↗
12. Effects of current-assisted heat treatment time on microstructure evolution and superplastic properties of Ti-22Al-24Nb-0.5Moalloy10.1016/j.matchar.2019.02.007 ↗
13. Hot deformation mechanism and ringrolling behavior10.1007/s40195-017-0583-6 ↗
14. 1-Shot hot stamping of ultra-high strength steel parts consisting of resistance heating, forming, shearing and die quenching10.1016/j.ijmachtools.2014.10.008 ↗
15. Electroplasticity in electrically-assisted forming: process phenomena, performances and modelling10.1016/j.ijmachtools.2022.103871 ↗
16. Effect of electroplastic rolling on deformability and oxidation of NiTiNb shape memory alloy10.1016/j.jmatprotec.2012.08.001 ↗
17. Straightening of micro wires using the direct wire heating and pulling method10.1016/j.ijmachtools.2006.10.002 ↗
18. A review of electrically-assisted manufacturing with emphasis on modeling and understanding of the electroplastic effect10.1115/1.4036716 ↗
19. Experimental and simulated investigation of the deformation behavior and microstructural evolution of Ti6554 titanium alloy during an electropulsing-assisted microtension process10.1016/j.msea.2022.142745 ↗
20. Electroplastic effect in copper subjected to low density electric current10.1016/0036-9748(81)90284-2 ↗
21. A comment on “effect of electric current pulses on the recrystallization of copper”10.1016/0036-9748(83)90237-5 ↗
22. Defect reconfiguration in a Ti–Al alloy via electroplasticity10.1038/s41563-020-00817-z ↗
23. Electroplasticity mechanism of Ti2AlNb alloys under hot compression with the application of a lower electric current10.1016/j.msea.2024.147134 ↗
24. High-temperature hot deformation behavior and processing map of Ti-22Al-25Nb alloy
25. Modeling of dynamic material behavior in hot deformation: forging of Ti-6242
26. Study on hot deformation behavior and processing map of a Ti-47.5Al-2.5V-1.0Cr-0.2Zr alloy with a fully lamellar microstructure10.1016/j.jallcom.2022.163648 ↗
27. Hot compression deformation behavior and processing maps of ATI 718Plus superalloy10.1016/j.jallcom.2020.155195 ↗
28. Processing maps: a status report10.1361/105994903322692420 ↗
29. Primary hot working characteristics and microstructural evolution of as-cast and homogenized Ti-4Al-2.5V-1.5Fe alloy10.1016/j.jallcom.2023.169556 ↗
30. Thermally activated plastic flow of metals and ceramics with an electric field or current10.1016/S0921-5093(01)01122-4 ↗
31. Application of high-density current in plastic working of metals10.1002/pssa.2210520109 ↗
32. Investigation of current-assisted electromagnetic tensile forming for sheet metal10.1007/s00170-021-08025-y ↗
33. Dislocation structure evolution under electroplastic effect10.1016/j.msea.2019.138026 ↗
34. Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical insitu transmission electron microscopy observations10.1016/j.jmst.2019.08.008 ↗
35. EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel based superalloy during hot compressive deformation10.1016/j.matdes.2016.02.052 ↗
36. Uniform texture in Al-Zn-Mg alloys using a coupled force field of electron wind and external load10.1016/j.jmst.2019.07.025 ↗
37. Influence of high energy pulse current on the mechanical properties and microstructures of Ti-6Al- 4V alloy10.1007/s11665-017-2960-8 ↗
38. Mechanism for the macro and micro behaviors of the Ni-based superalloy during electrically-assisted tension: local Joule heating effect10.1016/j.jallcom.2018.01.325 ↗
39. The coupling effect of particle and electric current on the grain refinement of Al–Cu–Li alloy by an improved thermo-mechanical treatment with electrically-assisted annealing10.1016/j.msea.2023.145980 ↗
40. Fast hardening response of martensitic stainless steel by copper-rich cluster formation under pulsed electric current10.1016/j.matchar.2022.112410 ↗
41. Investigation of thermal and mechanical effects during electrically-assisted compression of CoCrFeNiW0.5 high entropy alloy10.1016/j.matchar.2023.112981 ↗
42. Deviations from Matthiessen’s rule of the electrical resistivity of dislocations in aluminum10.1143/JPSJ.36.698 ↗
43. Salandro · 2015
44. Size effects on flow stress behaviour during electrically-assisted micro-tension in a magnesium alloy AZ3110.1016/j.msea.2016.02.064 ↗
45. Effect of pulse current on thermal performance and deep drawing of SiCp/2024Al composite sheet10.1007/s00170-012-4510-8 ↗
46. Influence of electric current on superplastic deformation mechanism of 5083 aluminium alloy10.1179/1743284715Y.0000000120 ↗
47. Detection of current-induced vacancies in thin aluminum–copper lines using positrons10.1063/1.116700 ↗
48. Segregation of copper in an Fe–Cu alloy under pulsed electric current10.1080/09500839.2015.1069415 ↗
49. Reconstructing the decomposed ferrite phase to achieve toughness regeneration in a duplex stainless steel10.1016/j.actamat.2019.11.008 ↗
50. Accelerated cluster dissolution using electropulsing for ultrafast performance regeneration10.1016/j.scriptamat.2019.10.045 ↗
51. The interface structure and its impact on the mechanical behavior of TiAl/Ti2AlNb laminated composites10.1016/j.msea.2021.142095 ↗
52. Characterization of strain field distribution in carbon fiber reinforced resin matrix composites using electron beam moiré and geometric phase analysis10.1016/j.optlaseng.2022.107457 ↗