journal article·2026-10

Homogenization of Al-Mg-Mn-Si-Er-Zr alloy: Dissolution and diffusion, dispersoid precipitation and recrystallization resistance

Jie-Ming Gao, Wu Wei, Wei Shi, Peng Qi, Xiao-Rong Zhou, Sheng-Ping Wen, Hui Huang, Kun-Yuan Gao, Xiao-Lan Wu, Li Rong, Zuo-Ren Nie

Publisher page

Abstract

This paper systematically investigated the microstructure evolution and mechanical properties of Al-Mg-Mn-Si-Er-Zr alloy during homogenization. The results shows that the dissolution of β phase is mainly depends on particle size, and the diffusion homogenization of solute element (Mg) in the alloy matrix mainly depends on the grain size. The experimental results of Al-Mg-Mn-Si-Er-Zr alloy are in good agreement with the theoretical model predictions. Compared to the traditional single-stage homogenization process (450 °C/24 h), the novel three-stage homogenization process (280 °C/12 h + 375 °C/48 h + 450 °C/24 h) effectively regulates Mn-rich dispersoids and Al3(Er, Zr) phases precipitation simultaneously, significantly increasing number density and reducing average size due to optimized nucleation kinetics at the low-temperature stage. Furthermore, after rolling and annealing, three-stage homogenization process exhibits higher recrystallization resistance and yield strength. More strikingly, a special chain-like Al3(Er, Zr) phase is observed for the first time, which is attributed to Er segregation-induced nucleation at the Mg2Si/Al interface. This work aims to provide a theoretical basis and experimental support for the homogenization process design of multi-element micro-alloyed Al-Mg alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Effects of Al3(Sc1-xZrx) nano-particles on microstructure and mechanical properties of friction-stir-welded Al-Mg-Mn alloys10.1016/S1003-6326(22)66087-4 ↗
2. Effect of cold rolling on mechanical and corrosion properties of stabilized Al-Mg-Mn-Er-Zr alloy10.1016/j.jmrt.2021.11.075 ↗
3. Synergy of tensile strength and ductility in a novel additively manufactured Al-Mg-Mn-Er-Zr alloy with a trilevel equiaxed heterogeneous structure
4. Role of Mg in simultaneously improving the strength and ductility of Al-Mg alloys10.1016/j.msea.2016.01.089 ↗
5. Tailoring microstructure and mechanical properties of Al-Mg-Si-Cu alloy with varying Mn and/or Cr additions10.1016/j.msea.2023.146053 ↗
6. Effect of homogenisation treatment on precipitation, recrystallisation and properties of Al - 3% Mg - TM alloys (TM = Mn, Cr, Zr)10.1016/j.matdes.2016.07.010 ↗
7. The influence of Er and Zr microalloying on improving the mechanical properties and recrystallization resistance of Al-Mg-Er-Zr alloys10.1016/j.jallcom.2026.187735 ↗
8. Precipitation behavior of L12 Al3Zr phase in Al-Mg-Zr alloy10.1016/j.matchar.2018.02.030 ↗
9. Sc/Zr ratio-dependent mechanisms of strength evolution and microstructural thermal stability of multi-scale hetero-structured Al-Mg-Sc-Zr alloys10.1016/j.jmst.2022.09.009 ↗
10. Precipitation evolution in Al-Er-Zr alloys during aging at elevated temperature10.1016/j.jallcom.2013.03.237 ↗
11. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials10.1016/j.pmatsci.2017.10.004 ↗
12. Enhancing the recrystallization resistance and strength-ductility trade-off of Al-Mg-Si-Cu-Mn alloys by three-step homogenization10.1016/j.msea.2024.146420 ↗
13. Intermetallic phase evolution of 5059 aluminum alloy during homogenization10.1016/S1003-6326(13)62900-3 ↗
14. Effect of homogenization treatment on microstructure and hot workability of high strength 7B04 aluminium alloy10.1016/S1003-6326(07)60094-6 ↗
15. Multistage homogenization process of aluminum alloy 261810.1002/mawe.201900117 ↗
16. Effect of second phase particles on grain refinement during equal-channel angular pressing of an Al-Mg-Mn alloy10.1016/j.actamat.2011.10.023 ↗
17. Quasi-in-situ investigation on recrystallization behavior of an Al-Mg-Sc-Zr alloy under different homogenization processes10.1016/j.jmrt.2025.08.047 ↗
18. Dispersoid formation and recrystallization behavior in an Al-Mg-Si-Mn alloy10.1016/S1005-0302(10)60040-0 ↗
19. Control of second-phase particles in the Al-Mg-Mn alloy AA 508310.1016/j.jallcom.2016.08.070 ↗
20. Microstructure evolution of a modified AA5083 aluminum alloy during a multistage homogenization treatment10.1016/j.matchar.2011.12.006 ↗
21. Effect of metastable Mg2Si and dislocations on α-Al(MnFe)Si Dispersoid formation in Al-Mn-Mg 3xxx alloys10.1007/s11661-018-4852-4 ↗
22. Improving the elevated-temperature properties by two-step heat treatments in Al-Mn-Mg 3004 alloys10.1007/s11663-018-1268-x ↗
23. Improving microstructure and deformation surface quality of novel Al-Mg-Zn-Zr alloy by varying homogenization regimes10.1016/j.jmst.2023.10.045 ↗
24. The mechanism of L12 phase precipitation, microstructure and tensile properties of Al-Mg-Er-Zr alloy10.1016/j.msea.2018.11.135 ↗
25. Effects of homogenization on the microstructural evolution of a novel Zr and Er containing Al-Mg-Zn alloy10.1016/j.intermet.2023.107907 ↗
26. The recrystallization behavior of Al-6Mg-0.4Mn-0.15Zr-xSc (x = 0.04-0.10 wt%) alloys10.1016/j.matchar.2018.11.009 ↗
27. Effect of three-step homogenization on microstructure and properties of 7N01 aluminum alloys10.1016/S1003-6326(18)64716-8 ↗
28. Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy10.1016/j.matchar.2021.111487 ↗
29. Enhanced homogeneous dispersoid precipitation by adding Si and Cr in an Al-Mg-Mn alloy10.1016/j.jallcom.2025.183857 ↗
30. Effect of three-stage homogenization on recrystallization and fatigue crack growth of 7020 aluminum alloy10.1016/j.jmrt.2020.09.066 ↗
31. Effects of AlMn dispersoids and Al3(Sc,Zr) precipitates on the microstructure and ambient/elevated-temperature mechanical properties of hot-rolled AA5083 alloys10.1016/j.msea.2022.143950 ↗
32. Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization10.1016/j.jmst.2020.12.028 ↗
33. Microstructural evolution of new type Al-Zn-Mg-Cu alloy with Er and Zr additions during homogenization10.1016/S1003-6326(17)60168-7 ↗
34. The study on the coarsening process and precipitation strengthening of Al3Er precipitate in Al-Er binary alloy10.1016/j.jallcom.2014.04.093 ↗
35. Development of intermetallic particles during solidification and homogenization of two AA 5xxx series Al-Mg alloys with different Mg contents10.1016/j.jallcom.2017.09.060 ↗
36. Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels
37. Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels
38. Influence of homogenisation time on evolution of eutectic phases, dispersoid behaviour and crystallographic texture for Al-Zn-Mg-Cu-Ag alloy10.1016/j.jallcom.2019.06.091 ↗
39. Thermodynamic calculation of the Al-Mg phase diagram10.1016/0364-5916(93)90017-6 ↗
40. Achieving superior dispersion-strengthening effect in an AA5xxx Al-Mg-Mn alloy by mico-alloying10.1016/j.matdes.2023.111647 ↗
41. Synergistic strengthening by nano-sized α-Al(Mn,Fe)Si and Al3Zr dispersoids in a heat-resistant Al-Mn-Fe-Si-Zr alloy10.1016/j.msea.2021.141460 ↗
42. Solute segregation governed atomistic configuration of β-Mg2Si/α-Al interface in an Al alloy10.1016/j.scriptamat.2025.116845 ↗
43. Atomic-scale investigation on the evolution of T1 precipitates in an aged Al-Cu-Li-Mg-Ag alloy10.1016/j.jmst.2024.04.073 ↗
44. Modeling homogenization behavior of Al-Si-Cu-Mg aluminum alloy10.1016/j.matdes.2017.05.006 ↗
45. Second phase dissolution, metallurgical
46. On the kinetics of precipitate dissolution, metal
47. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
48. Revision of the classical nucleation theory for supersaturated solutions
49. Synergetic effect of Er and Zr on the precipitation hardening of Al-Er-Zr alloy10.1016/j.scriptamat.2011.06.033 ↗
50. Enhancement in dispersoid precipitation and dispersion strengthening by prior deformation in an Al-Mg-Mn alloy10.1016/j.msea.2023.144808 ↗
51. Mechanism of Mn-Cr synergy in dispersoid precipitation of Al-Mg-Si-Cu alloys10.1016/j.scriptamat.2025.117036 ↗
52. Multi-modal microstructure evolution and strengthening mechanisms in Al6Si1Mg0.5Er1Zr alloy fabricated by laser powder bed fusion10.1016/j.msea.2025.149257 ↗
53. Effect of homogenization temperature on microstructure and mechanical properties of Al-Mg-Si alloy containing low-melting point elements10.1016/j.jallcom.2022.163719 ↗
54. Morphology and crystallography of β-Mg2Si precipitation in Al-Mg-Si alloys10.2320/matertrans.42.2576 ↗
55. Optimizing the mechanical performance of extruded AA5454 aluminum alloys microalloyed with Sc and Zr through post-aging treatments10.1016/j.matchar.2026.116405 ↗
56. Atomic structure and evolution of a precursor phase of Ω precipitate in an Al-Cu-Mg-Ag alloy10.1016/j.actamat.2021.117538 ↗
57. Er-containing microalloyed aluminum alloys: a review10.1007/s10853-023-09185-w ↗
58. Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing10.1016/j.jmst.2020.04.015 ↗