Influence of Zr addition on the structure, mechanical properties and oxidation resistance of TiN coatings
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (47)
Show source-provided references
1. The correlation of thermo-mechanical stresses on cutting tool wear
2. Performance of hard coatings, made by balanced and unbalanced magnetron sputtering, for decorative applications
3. The Materials Project
4. XPS in the study of high-temperature oxidation of CrN and TiN hard coatings10.1016/0257-8972(95)08360-X ↗
5. Study of thermal stability of some hard nitride coatings deposited by reactive magnetron sputtering10.1016/S0257-8972(99)00456-9 ↗
6. Investigation into the change of structure, mechanical properties and thermal stability for ZrN coating by oxygen addition10.1016/j.surfcoat.2024.131276 ↗
7. Electrochemical characteristics of steel coated with TiN and TiAlN coatings10.1016/S0010-938X(00)00057-3 ↗
8. Characterisation and corrosion resistance of TiCrN composite coating on steel by physical vapour deposition method10.1007/s40735-016-0055-y ↗
9. Hard coatings for decorative applications10.1016/0257-8972(88)90023-0 ↗
10. Microstructure and corrosion resistance of nanocrystalline TiZrN films on AISI 304 stainless steel substrate10.1116/1.3305963 ↗
11. Effect of nitrogen flow rate on properties of nanostructured TiZrN thin films produced by radio frequency magnetron sputtering10.1016/j.tsf.2010.04.099 ↗
12. Mechanical treatment of TiO2 and ZrO2 oxide mixtures10.1166/jnn.2010.3023 ↗
13. Thermal oxidation behavior of TiZrN-coated Inconel 617
14. Black Ti-Zr-based oxygen defective oxide film with visible light absorption prepared via atmospheric oxidation10.1557/s43578-020-00009-0 ↗
15. Structure, mechanical properties and thermal stability of Ti1-xSixN coating10.1016/j.ceramint.2018.05.210 ↗
16. Effects of additional oxygen on the structural, mechanical, thermal, and corrosive properties of TiN coatings10.1016/j.ceramint.2022.01.336 ↗
17. Large-area high-rate pulsed laser deposition of smooth TiCxN1− x coatings at room temperature-mechanical and tribological properties10.1016/j.surfcoat.2004.07.009 ↗
18. Microstructure and mechanical properties of gradient Ti(C, N) and TiN/Ti(C, N) multilayer PVD coatings10.1016/j.msea.2007.06.017 ↗
19. Deposition of Ti-B-N (single and multilayer) and Zr-B-N coatings by chemical vapor deposition techniques on cutting tools10.1016/j.tsf.2004.08.077 ↗
20. Improvement of high-temperature oxidation resistance of titanium nitride and titanium carbide films by aluminum ion implantation10.1016/S0257-8972(98)00380-6 ↗
21. The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts10.1016/j.surfcoat.2008.05.036 ↗
22. Friction and wear properties of TiN, TiAlN, AlTiN and CrAlN PVD nitride coatings10.1016/j.ijrmhm.2011.09.010 ↗
23. Evaluation of the fracture toughness of Ti1-xZrxN hard coatings: effect of compositions10.1016/j.surfcoat.2018.11.073 ↗
24. Effect of Si content on the thermal stability and oxidation resistance of arc-deposited TiAlSiN films with cubic structure10.1016/j.surfcoat.2024.130444 ↗
25. Effect of Al content on the microstructure, mechanical properties, thermal stability and oxidation resistance of TiAlSiN coatings10.1016/j.surfcoat.2025.132153 ↗
26. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
27. The alloy theoretic automated toolkit: a user guide10.1016/S0364-5916(02)80006-2 ↗
28. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
29. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
30. From ultrasoft pseudopotentials to the projector augmented wave method10.1103/PhysRevB.59.1758 ↗
31. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
32. Constant temperature molecular dynamics methods
33. Adsorption of oxygen to high entropy alloy surfaces for up to 2 ML coverage using density functional theory and Monte Carlo calculations10.1021/acs.langmuir.1c03191 ↗
34. Effect of Mo incorporation on the structure, mechanical properties, thermal stability and oxidation resistance of TiALN coatings
35. Solid solution hardening10.1016/0001-6160(63)90213-X ↗
36. Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices10.1016/j.actamat.2020.10.068 ↗
37. Heavy-element-alloying for toughness enhancement of hard nitrides on the example Ti-W-N10.1016/j.actamat.2022.117897 ↗
38. Toughness enhancement and tribochemistry of the Nb-ag-N films actuated by solute ag10.1016/j.actamat.2017.07.034 ↗
39. Toughness enhancement in highly NbN-alloyed Ti-Al-N hard coatings10.1016/j.actamat.2016.08.084 ↗
40. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
41. An evaluation of the advantages and limitations in simulating indentation cracking with cohesive zone finite elements10.1088/0965-0393/22/1/015011 ↗
42. A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings10.1080/14786435.2014.913110 ↗
43. Effects of indenter angle on micro-scale fracture toughness measurement by pillar splitting10.1111/jace.15093 ↗
44. Correlation between the oxidation mechanism of titanium under a pure oxygen atmosphere, morphology of the oxide scale, and diffusional phenomena10.1007/BF00604567 ↗
45. Effect of Nb addition on oxide formation on Ti-xNb alloys10.2320/matertrans.MT-M2019136 ↗
46. Atomic transport mechanisms in thin oxide films grown on zirconium by thermal oxidation, as-derived from 18O-tracer experiments10.1016/j.actamat.2011.08.035 ↗
47. Calculation of oxygen diffusion coefficients in oxide films formed on low-temperature annealed Zr alloys and their related corrosion behavior10.3390/met9080850 ↗