The effect of Ga-In-Sn doping on the phase transition and mechanical response at the Sn-Bi/Cu joint interface for different Bi contents
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (35)
Show source-provided references
1. Influence of temperature gradient bonding on the micromorphology and shear performance of Sn-based solder joints: experiments and first principles calculations10.1016/j.jmapro.2024.05.057 ↗
2. Interfacial reaction and shear strength of ultrasonically-assisted Sn-ag-cu solder joint using composite flux10.1016/j.jmapro.2020.12.020 ↗
3. Morphological evolution and development trend of brazing materials
4. Low melting point solders based on Sn, Bi, and In elements
5. Reliability challenges in 3D IC packaging technology10.1016/j.microrel.2010.09.031 ↗
6. Formation and growth mechanism of thin Cu6Sn5 films in Sn/Cu and Sn-0.1AlN/Cu structures using laser heating10.1108/SSMT-05-2023-0021 ↗
7. Research progress in dissimilar material brazing technology and applications
8. Effects of MoS2 content on the microstructure and mechanical properties of low-melting-temperature Sn-Bi solder joints10.1007/s11664-025-12644-6 ↗
9. Microstructure and performance enhancement of Sn58Bi solder joints on Cu substrate with submicron in particles addition10.1016/j.matchar.2025.115959 ↗
10. Influence of different contents of Ag nanoparticles on microstructure and properties of Sn58Bi/Cu solder joint10.1007/s10854-025-16301-w ↗
11. Effect of Ti nanoparticles on the microstructures and properties of Sn interconnect materials for 3D packaging
12. Effect of Ga on microstructure and properties of Ag50CuSn12 and Al2O3/ oxygen-free copper welds10.1016/j.matchar.2024.114254 ↗
13. Influence of gallium addition in Sn-Ag-Cu lead-fee solder10.1007/s10854-015-3102-4 ↗
14. Effects of Ga addition on the microstructure and mechanical performance of Sn-58Bi based alloys and the solder joints10.1007/s10854-024-13936-z ↗
15. Quaternary low melting point Sn-Bi-In-xGa solder with improved mechanical performance for advanced electronic packaging10.1016/j.intermet.2024.108534 ↗
16. The effect of Ga on interfacial reactions and intermetallic evolution in SnBiGaIn quaternary alloys10.1016/j.jallcom.2025.182337 ↗
17. Effects of Bi content on melting characteristics, microstructure, and shear strength of Sn-based solders10.1016/j.jmrt.2025.12.154 ↗
18. Adsorption and interface reaction in direct active bonding of GaAs to GaAs using Sn-Ag-Ti solder filler10.1007/s10854-021-06627-6 ↗
19. Microstructures, interface reaction, and properties of Sn–Ag–Cu and Sn–Ag–Cu–0.5CuZnAl solders on Fe substrate10.1007/s10854-020-03220-1 ↗
20. Effects of Ga addition on microstructure and properties of Sn–0.5Ag–0.7Cu solder10.1007/s10854-014-2057-1 ↗
21. Study of microstructure, growth orientations and shear performance of Cu/Sn-3.0Ag-0.5Cu/Cu solder joints by using thermal gradient bonding10.1016/j.matchar.2023.113133 ↗
22. A thermodynamic assessment of the copper–gallium system10.1016/j.calphad.2008.03.006 ↗
23. Subsolidus phase relations of the Cu–Ga–N system10.1016/j.jallcom.2006.08.015 ↗
24. Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn–3.5Ag, Sn–3.8Ag–0.7Cu and Sn–0.7Cu) on Cu10.1557/JMR.2002.0042 ↗
25. Interfacial intermetallic compounds growth kinetics and mechanical characteristics of Ga-Cu interconnects prepared via transient liquid phase bonding
26. Interfacial reaction in Cu/Sn/Cu system during the transient liquid phase soldering process10.1016/j.actamat.2010.10.053 ↗
27. Effect of Ga additions as micro-alloying element to microstructure formation, thermal properties and mechanical properties of Sn-0.7Cu solder alloy10.1016/j.mtla.2026.102671 ↗
28. Growth orientation of Cu–Sn IMC in Cu/Sn–3.5Ag/Cu–xZn microbumps and Zn-doped solder joints10.1016/j.matlet.2014.07.061 ↗
29. Combined effects of Bi and Sb elements on microstructure, thermal and mechanical properties of Sn-0.7Ag-0.5Cu solder alloys10.1016/S1003-6326(22)66021-7 ↗
30. Structural, thermal and wetting characteristics of novel low bi-low ag containing Sn–x.ag–0.7Cu–1.0Bi (x=0.5 to 1.5) alloys for electronic application
31. Design guidelines for composition of brazing filler metals and evolution mechanisms of typical microstructures
32. Effect of in addition on thermodynamic properties, wettability, interface microstructure, and soldering performance of SnBiAg–xIn/cu solder joints10.3390/met12101594 ↗
33. The effect of Ga content on the wetting reaction and interfacial morphology formed between Sn–8.55Zn–0.5Ag–0.1Al–xGa solders and cu10.1016/j.scriptamat.2005.09.033 ↗
34. Surface and transport properties of liquid Bi–Sn alloys10.1007/s10854-020-03118-y ↗
35. Microstructure and orientation evolution of β-Sn and interfacial Cu6Sn5 IMC grains in SAC105 solder joints modified by Si3N4 nanowires10.1016/j.jmrt.2023.08.186 ↗