An investigation of in situ observation and phase transformation mechanism in cyclic heat treatment of post-rolling Ti-44Al-4Nb-1.5Mo-0.1B alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
2. Design, Processing, Microstructure, Properties, and Applications of Advanced Intermetallic TiAl Alloys10.1002/adem.201200231 ↗
3. Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800℃ in a TiAl alloy10.1016/j.actamat.2021.117585 ↗
4. An innovative way to fabricate γ-TiAl blades and their failure mechanisms under thermal shock10.1016/j.scriptamat.2021.114092 ↗
5. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy10.1016/j.intermet.2019.106521 ↗
6. Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue10.1016/j.actamat.2017.12.040 ↗
7. In and ex situ investigations of the β-phase in a Nb and Mo containing γ-TiAl based alloy10.1016/j.intermet.2008.03.008 ↗
8. Design of Novel β‐Solidifying TiAl Alloys with Adjustable β/B2‐Phase Fraction and Excellent Hot‐Workability10.1002/adem.200800164 ↗
9. Enhanced strength-ductility synergy of β-solidifying TiAl alloy with preferred lamellar orientation by texturing high-temperature α phase through hot extrusion10.1016/j.msea.2023.145626 ↗
10. A refined fully lamellar TiAl alloy extruded at α-phase region: Microstructure and mechanical properties10.1016/j.msea.2023.145804 ↗
11. The enhanced work hardening rates of the constituent TiAl and Ti3Al phases in a lamellar microstructure10.1016/0921-5093(95)09779-1 ↗
12. Effect of lamellar spacing on fatigue crack growth behaviour of a TiAl-based aluminide with lamellar microstructure10.1016/j.msea.2011.10.055 ↗
13. Unravelling the lamellar size-dependent fracture behavior of fully lamellar intermetallic γ-TiAl10.1016/j.actamat.2022.117698 ↗
14. Effects of lamellar spacing on microstructural stability and creep properties in β-solidifying γ-TiAl alloy by directional solidification10.1016/j.msea.2017.11.080 ↗
15. Evolution of the ωo phase in a β-stabilized multi-phase TiAl alloy and its effect on hardness10.1016/j.actamat.2013.10.036 ↗
16. Effect of multi-stage heat treatment on mechanical properties and microstructure transformation of Ti–48Al–2Cr–2Nb alloy10.1016/j.msea.2021.141321 ↗
17. Producing fine fully lamellar microstructure for cast γ-TiAl without hot working10.1016/j.intermet.2020.106728 ↗
18. Oxidation resistance of TiAl alloy improved by hot-pack rolling and cyclic heat treatment10.1016/j.matchar.2021.111196 ↗
19. Light-weight intermetallic titanium aluminides - Status of research and development
20. Reassessment of the binary aluminum-titanium phase diagram10.1361/154770306X109809 ↗
21. Hot salt corrosion behavior of the Ti-44Al-4Nb-1.5Mo-(B,Y) alloy in the temperature range of 750–950 °C10.1016/j.jmrt.2023.08.220 ↗
22. Hot deformation behavior and deformation mechanism of two TiAl-Mo alloys during hot compression10.1016/j.msea.2018.01.133 ↗
23. Effect of rare-earth element Gd addition on microstructure of TNM-based TiAl alloys10.1016/j.matlet.2024.135879 ↗
24. Tailoring the Microstructure of a β-Solidifying TiAl Alloy by Controlled Post-solidification Isothermal Holding and Cooling10.1007/s11661-017-4209-4 ↗
25. The effect of heat treatment on crack control and grain refinement in laser beam welded β-solidifying TiAl-based alloy10.1016/j.intermet.2013.04.007 ↗
26. Interlamellar boundaries govern cracking10.1016/j.actamat.2021.117091 ↗
27. Atomic-scale analysis of the duplex full lamellar TiAl alloys with different modulation cycles for the mechanical properties
28. Microstructure, fracture toughness and high-temperature tensile property of large size Ti–46Al–5Nb-0.18C-0.3Si alloy with oriented lamella by electromagnetic confinement directional solidification
29. Effect of variation in Zr content on microstructure and high-temperature tensile properties of a γ-TiAl alloy10.1016/j.msea.2024.146085 ↗
30. Isothermal section at 850°C of the Ti–Dy–Al system in the Ti–TiAl–DyAl2–Dy region10.1016/j.jallcom.2014.01.250 ↗
31. Calculation of the titanium-aluminum phase diagram10.1007/BF02652532 ↗
32. Phase equilibria in the Ti–Al binary system10.1016/S1359-6454(00)00118-X ↗
33. Calculation of tilt angles for crystal specimen orientation adjustment using double-tilt and tilt-rotate holders10.1016/0739-6260(89)90058-0 ↗
34. Crystal Structure of TiAl10.1007/BF03397651 ↗
35. Gitterstruktur und thermische Ausdehnung der Übergangsmetalle Scandium10.1515/ijmr-1968-590506 ↗
36. Statistical analysis of lamellar and Widmannstätten structures obtained in Nb-rich γ-TiAl alloy with varied cooling rate and annealing duration10.1016/j.intermet.2024.108529 ↗
37. Structural stability and mechanical properties of TiAl+Mo alloys: A comprehensive ab initio study10.1016/j.actamat.2021.117427 ↗
38. Remelting induced fully-equiaxed microstructures with anomalous eutectics in the additive manufactured Ni32Co30Cr10Fe10Al18 eutectic high-entropy alloy10.1016/j.scriptamat.2021.113952 ↗
39. In-situ observation of microstructure evolution and phase transformation under continuous cooling in Ru-containing TiAl alloys10.1016/j.matchar.2020.110296 ↗
40. In-situ investigation of β/α transformation in β-solidifying γ-TiAl alloys at different cooling rates10.1016/j.matlet.2020.129092 ↗
41. In-situ observation of microstructure evolution and improvement of distribution of reinforcing particles to reveal dual-enhancement mechanisms of strength and plasticity for Ti48Al2Cr2Nb3C alloy10.1016/j.msea.2023.145565 ↗
42. Structural stability and the alloying effect of TiB polymorphs in TiAl alloys10.1016/j.intermet.2017.07.002 ↗
43. The nucleation sequence of α-Al on TiB2 particles in Al-Cu alloys10.1016/j.actamat.2021.116652 ↗
44. Effect of in-situ synthesized TiB whiskers on interfacial microstructure and shear strength of γ-TiAl joint vacuum brazed with TiH2-Ni-TiB2 fillers
45. Superior high-temperature strength-ductility of TiB2–Ti2AlN/TiAl composite with core-shell microstructure10.1016/j.msea.2023.145873 ↗
46. The thermal stability of the microstructure of γ-based titanium aluminides10.1016/1359-6454(95)00402-5 ↗
47. High-temperature structural intermetallics10.1016/S1359-6454(99)00301-8 ↗
48. Phase transformation mechanisms involved in two-phase TiAl-based alloys—II Discontinuous coarsening and massive-type transformation10.1016/1359-6454(95)00168-6 ↗
49. Phase transformation mechanisms involved in two-phase TiAl-based alloys—I Lambellar structure formation10.1016/1359-6454(95)00167-4 ↗
50. Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability10.1016/j.actamat.2023.119036 ↗
51. Rare-earth–platinum alloy nanoparticles in mesoporous zeolite for catalysis10.1038/s41586-020-2671-4 ↗
52. Phase transformations of the L12-Ti3Al phase in γ-TiAl alloy10.1016/j.matdes.2017.02.047 ↗
53. Ordered ω phases in a 4Zr–4Nb-containing TiAl-based alloy10.1016/j.actamat.2007.12.013 ↗
54. Microstructure evolution, hot deformation behavior and mechanical properties of Ti-43Al-6Nb-1B alloy10.1016/j.intermet.2012.07.016 ↗