journal article·2026-09

Effects of phase boundary orientation on slip transfer, slip localization, and damage in tension of Ti55511 titanium alloy

Wenhao Liu, Jueyi Qi, Yujing Liu, Zibo Zhao, Xie Zhang, Hengjun Luo, Jing Xie, Wei Xiang, Jia Wang, Lvjun Zhou, Pan Wen, Chenxu Li, Meng Qi, Jun Zhu, Longqing Chen, Hao Deng

Materials & Design· Volume 269
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Effect of cooling rate following β forging on texture evolution and variant selection during β→ α transformation in Ti-55511 alloy10.1016/j.jmst.2021.09.011 ↗
2. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
3. Effect of microstructure on the mechanical properties of Ti–5Al–5Mo–5V–1Cr–1Fe alloy10.1016/j.msea.2019.138728 ↗
4. In-situ investigating the heterogeneous tensile deformation behavior of near β titanium alloys10.1016/j.msea.2024.147569 ↗
5. Microstructural morphology effects on fracture toughness and crack growth behaviors in a high strength titanium alloy10.1016/j.msea.2021.141626 ↗
6. The anisotropy of fracture toughness of an α+ β titanium alloy by β forging10.1016/j.jmrt.2023.10.230 ↗
7. Effect of low-angle grain boundaries on morphology and variant selection of grain boundary allotriomorphs and Widmanstätten side-plates10.1016/j.actamat.2016.04.033 ↗
8. Achieving synergy between strength and ductility in metastable β-titanium alloy through a novel multi-morphological microstructure10.1016/j.jallcom.2024.177863 ↗
9. Microstructure evolution and mechanical property of a new multi-component β titanium alloy with ultrahigh strength above 1350 MPa10.1016/j.jmrt.2022.11.098 ↗
10. Thermomechanical processing of near-β Ti–5Al–5Mo–5V–1Cr–1Fe alloys: effect of deformation reduction on microstructures and mechanical properties10.1016/j.msea.2022.143786 ↗
11. Variant selection within one β grain in laser solid formed Ti-6Al-4V alloys10.1016/j.matchar.2022.111744 ↗
12. Synergistic deformation mechanism in dual-phase titanium alloy: insights from microstructure, geometrical compatibility, and α/β phase interaction
13. In-situ investigation of tensile anisotropy mechanism in an advanced Ti2AlNb-based alloy associated with CRSS ratio and damage model10.1016/j.msea.2023.145894 ↗
14. Fracture toughness anisotropy of Ti17 billet processed by the β forging10.1016/j.msea.2021.140825 ↗
15. Structures and migrations of interfaces between β precipitates and α′ matrix in a Ti-2.6 wt% Mo alloy10.1016/j.actamat.2024.120429 ↗
16. Quantification of α phase strengthening in titanium alloys: crystal plasticity model incorporating α/β heterointerfaces10.1016/j.ijplas.2022.103444 ↗
17. Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation10.1016/S0921-5093(00)01904-3 ↗
18. Variant selection by dislocations during α precipitation in α/β titanium alloys10.1016/j.actamat.2014.12.044 ↗
19. Interface dislocation trajectory and long-range strain associated with the migration of semicoherent interfaces10.1016/j.actamat.2024.120167 ↗
20. Dislocation-mediated migration of the α/β interfaces in titanium10.1016/j.actamat.2023.119364 ↗
21. A study of crystallography of α precipitates in a Ti-8 wt% Fe alloy
22. Dislocation network on the curved end face of α precipitates in a Ti-8 wt.% Fe alloy
23. Challenges related to elevated temperature during creep in a PM-HIP Ti-6Al-4 V alloy: the role of dislocations and pyramidal dislocations10.1016/j.jmst.2024.05.079 ↗
24. Deformation mechanisms in the α phase of the Ti-6Al-2Sn-4Zr-2Mo titanium alloy: In situ experiments and simulations10.1016/j.ijplas.2024.103947 ↗
25. Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming10.1016/j.actamat.2017.04.026 ↗
26. Orientation effect on α/β phase interface mediated deformation mechanism in titanium alloy10.1016/j.commatsci.2023.112616 ↗
27. Effect of α texture on the tensile deformation behavior of Ti–6Al–4V alloy produced via electron beam rapid manufacturing10.1016/j.msea.2018.11.012 ↗
28. Investigation of slip transfer across HCP grain boundaries with application to cold dwell facet fatigue10.1016/j.actamat.2017.01.021 ↗
29. A study of dislocation transmission through a grain boundary in hcp Ti–6Al using micro-cantilevers10.1016/j.actamat.2015.10.023 ↗
30. A size-dependent crystal plasticity finite-element model for creep and load shedding in polycrystalline titanium alloys10.1016/j.actamat.2007.03.017 ↗
31. Understanding cross boundary {332}< 113> twins in a Ti-15Mo alloy by composite Schmid factor10.1016/j.matchar.2022.112310 ↗
32. Hierarchical anisotropic material response of directed energy deposited (DED) Ti-6Al-4V alloy
33. An in situ study of microstructural strain localization and damage evolution in an (α+ β) Ti-Al-V-Fe-Si-O alloy10.1016/j.actamat.2022.118424 ↗
34. In-situ investigation of plasticity in a Ti-Al-V-Fe (α+ β) alloy: slip mechanisms, strain localization, and partitioning10.1016/j.ijplas.2021.103131 ↗
35. Efficient molecular dynamics simulations with many-body potentials on graphics processing units10.1016/j.cpc.2017.05.003 ↗
36. General-purpose machine-learned potential for 16 elemental metals and their alloys10.1038/s41467-024-54554-x ↗
37. Structures, effect of interface type on deformation mechanisms of γ-TiAl alloy under different temperatures and strain rates by molecular dynamics simulation10.1016/j.ijsolstr.2024.113051 ↗
38. Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: a review10.1016/j.jmst.2019.07.052 ↗
39. Manipulating the interfacial structures in titanium alloys containing interstitial solutes delivers ultra-high strength and ductility10.1016/j.ijplas.2025.104288 ↗
40. The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals10.1016/j.ijplas.2008.09.002 ↗
41. Effect of content and configuration of equiaxed α and lamellar α on deformation mechanism and tensile properties of a near-α titanium alloy10.1016/j.msea.2023.145192 ↗
42. Variant selection in additively manufactured alpha-beta titanium alloys10.1016/j.jmst.2021.10.021 ↗
43. Mechanistic insights into stress localization and crack precursors during dwell fatigue: dislocation evolution from basal slip in near-α titanium alloys
44. Influence of β anisotropy on deformation processes operating in Ti-5Al-5Mo-5V-3Cr at room temperature10.1016/j.actamat.2017.09.023 ↗
45. Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4V alloy10.1016/j.actamat.2019.07.025 ↗
46. The role of grain boundary plane in slip transfer during deformation of magnesium alloys10.1016/j.actamat.2022.117662 ↗
47. Slip heterogeneity in a colony-structured titanium alloy: planar versus wavy slip traces
48. Assessment of slip transfer criteria for prismatic-to-prismatic slip in pure Ti from 3D grain boundary data10.1016/j.actamat.2023.119424 ↗
49. Heterostructure enables anomalous improvement of cryogenic mechanical properties in titanium10.1016/j.actamat.2024.119982 ↗
50. Dislocation slip and crack nucleation mechanism in dual-phase microstructure of titanium alloys: a review10.1007/s40195-022-01505-4 ↗
51. Mechanical properties of alloys consisting of two ductile phases10.1016/j.pmatsci.2005.10.003 ↗
52. Discrete slip plane analysis of ferrite microtensile tests: Influence of dislocation source distribution and non-Schmid effects on slip system activity10.1016/j.matdes.2025.113698 ↗
53. Ridge-twin boundaries as prolific dislocation sources in low stacking-fault energy metals and alloys
54. Alloys, Quantification of grain boundary effects on the geometrically necessary dislocation density evolution and strain hardening of polycrystalline Mg4Al using in situ tensile testing in scanning electron microscope and HR-EBSD10.1016/j.jma.2024.05.021 ↗
55. ECCI analysis of shear accommodations at grain boundaries in commercially pure alpha titanium10.1016/j.ijplas.2020.102731 ↗
56. Quantitative study of the effect of grain boundary parameters on the slip system level Hall-Petch slope for basal slip system in Mg-4Al10.1016/j.actamat.2020.08.079 ↗
57. Estimation of micro-Hall-Petch coefficients for prismatic slip system in Mg-4Al as a function of grain boundary parameters10.1016/j.actamat.2021.117613 ↗
58. Review on slip transmission criteria in experiments and crystal plasticity models10.1007/s10853-015-9553-4 ↗
59. Incipient slip and long range plastic strain localization in microtextured Ti-6Al-4V titanium10.1016/j.actamat.2016.04.057 ↗
60. In-situ tensile study of Fe and trace B effects on deformation behavior and strengthening mechanisms in LDED-fabricated Ti-6Al-4V alloys