journal article·2025-09

Design and preparation of a three-dimensional interface structure Al/Mg laminated composites

Tao Wang, Feng Zhong, Xin Cao, Xu Cheng, Lin Pi, Yanhui Liu, Ming Liang, Jianfeng Li

Materials & Design· Volume 257
Publisher page

Abstract

To solve the problems of low interlayer bonding strength in Al/Mg Laminated metal composites (LMCs). This work took advantage of the fact that the three-dimensional (3D) interface structure can increase the interface contact area, hinder crack propagation, and delay interface cracking, and proposed to use spark plasma sintering (SPS) to prepare Al/Mg LMCs with 3D interface structure. The influence of the sintering temperature on the interface microstructure and mechanical properties of 2A12-Al/AZ91-Mg LMCs was systematically studied. The results indicate that 2A12-Al/AZ91-Mg LMCs with 3D interface structure similar to wave shape or gear meshing shape can be obtained by SPS integrated sintering. When the SPS integrated sintering temperature increased from 420 °C to 440 °C, a typical three-layer diffusion layer was formed at the 2A12-Al/AZ91-Mg interface. Moreover, the diffusion layer gradually transformed from a solid-phase diffusion characteristic to a solid–liquid coexistence diffusion characteristic. Meanwhile, the interface shear strength at 430 °C was the largest, which was 49.4 ± 2.67 MPa. The high interfacial shear strength benefits from the hindrance and suppression of cracks by this 3D interface structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. X. Dong, B. Gao, L. Xiao, J. Hu, M. Xu, Z. Li, J. Meng, X. Han, H. Zhou, Y. Zhu, Heterostructured metallic structural materials: research methods, properties, and future perspectives, Adv. Funct. Mater. 34(51) (2024) 2410521. doi: 10.1002/adfm.202410521.10.1002/adfm.202410521 ↗
2. Preparation, structure and properties of Mg/Al laminated metal composites fabricated by roll-bonding, a review10.1016/j.jma.2022.08.001 ↗
3. Corrosion behavior of Al/Mg/Al multilayered composite elaborated by accumulated roll bonding10.1016/S1003-6326(23)66386-1 ↗
4. Preparation, interfacial regulation and strengthening of Mg/Al bimetal fabricated by compound casting: a review10.1016/j.jma.2023.09.001 ↗
5. Microstructure and mechanical properties of Ti6Al4V/AA6061/AZ31 laminated metal composites (LMCs) fabricated by hot roll bonding10.1016/j.jallcom.2020.157943 ↗
6. Gao · Effect of Intermetallic Compounds on the Mechanical Properties of Cu/al Clad Sheets with an SS304 Interlayer · 2024 · 915
7. Development of high-strength and lightweight AA5052/LZ91 laminated metallic composites through accumulative roll bonding and subsequent cryorolling10.1016/j.msea.2025.147849 ↗
8. Lei · Effect of Thickness Ratio on Microstructure Evolution and Coordinated Behavior of Mg/al Composite Plates in One-Pass Asymmetric Rolling with Differential Temperature Rolls · 2024 · 217
9. Lightweight metal laminated plates produced via (hot, cold and cryogenic) roll bonding: a review10.1016/S1003-6326(22)66111-9 ↗
10. On the microstructure and texture of intermetallics in Al/Mg/Al multi-layer composite fabricated by accumulative roll bonding10.1016/j.micron.2023.103507 ↗
11. Effects of annealing on the interfacial structures and mechanical properties of hot roll bonded Al/Mg clad sheets10.1016/j.msea.2020.139673 ↗
12. Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer10.1016/j.matdes.2014.09.020 ↗
13. Development of Al/Mg bimetal prepared by ultrasonic vibration-assisted compound casting: Effects of interface treatment temperatures10.1016/j.msea.2023.145911 ↗
14. Effect of Impact Loading and Heat Treatment on Microstructure AndProperties of Multi-Layered Az31/Aa1050 Plates Fabricated by Single-Shot Explosive Welding10.1016/j.matdes.2022.110411 ↗
15. Surface properties of friction stir welded dissimilar joints of AA7075 and Mg-WE43 alloys: effect of positional arrangement10.1016/j.jma.2024.12.022 ↗
16. A study of phase constitution near the interface of Mg/Al vacuum diffusion bonding10.1016/j.matlet.2005.02.038 ↗
17. Microstructural evolution and mechanical behavior of Mg/Al laminated composite sheet by novel corrugated rolling and flat rolling10.1016/j.msea.2019.138318 ↗
18. Advances in the design, preparation and application of biomimetic damping materials10.1016/j.giant.2024.100321 ↗
19. Lateral performance of mortise-tenon jointed traditional timber frames with wood panel infill10.1016/j.engstruct.2018.02.022 ↗
20. Wood mortise and tenon structure picture in Baidu search engine of China.https://mbd.baidu.com/newspage/data/dtlandingsuper?nid=dt_3917518170606513831, 2024 (accessed 11 April 2024).
21. Exploring the capabilities of high-pressure spark plasma sintering (HPSPS): a review of materials processing and properties10.1016/j.matdes.2023.112238 ↗
22. The mechanical properties and formation mechanism of Al/Mg composite interface prepared by spark plasma sintering under different sintering pressures10.1016/j.vacuum.2020.109300 ↗
23. A first quantitative XPS study of the surface films formed, by exposure to water, on Mg and on the Mg-Al intermetallics: Al3Mg2 and Mg17Al1210.1016/j.corsci.2009.02.017 ↗
24. Investigation on microstructure, mechanical properties and fracture mechanism of Mg/Al laminated composites10.1016/j.msea.2022.143410 ↗
25. Microstructure, bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling10.1016/j.msea.2010.10.105 ↗
26. Improvement of interfacial bonding strength in roll-bonded Mg/Al clad sheets through annealing and secondary rolling process10.1016/j.msea.2015.01.035 ↗
27. Research on corrugated interface formation mechanism and mechanical properties of the CFR flat Mg/Al clad plate10.1016/j.jmrt.2023.08.053 ↗
28. Z. Q. Chen, L. Wei, B. Yu, B. Zhou. Interfacial microstructure and mechanical properties of Al5052/Mg-9.5Li-2Al alloy clad plates. Rare Met Mater Eng.44 (2015):587-591. doi: 10.1016/S1875-5372(15)30044-8.10.1016/S1875-5372(15)30044-8 ↗
29. Effect of joining temperature on microstructure and properties of diffusion bonded Mg/Al joints10.1016/S1003-6326(11)61414-3 ↗
30. Effect of Al thin film and Ni foil interlayer on diffusion bonded Mg-Al dissimilar joints10.1016/j.jallcom.2012.12.106 ↗
31. Effect of Zn interlayer thickness on the microstructure and mechanical properties of two-step diffusion bonded joint of ZK60Mg and 5083Al10.1016/j.vacuum.2018.12.036 ↗
32. Influence of Ni Interlayer on Microstructure and Mechanical Properties of Mg/Al Bimetallic Castings10.1007/s11661-018-4688-y ↗
33. Interfacial microstructures and mechanical properties of Mg/Al bimetal produced by a novel liquid-liquid compound casting process10.1016/j.jmatprotec.2018.06.013 ↗
34. Two-step bonding process for preparing 6061/AZ31 bimetal assisted with liquid molten zinc interlayer the process and microstructure10.1080/01694243.2021.1999713 ↗
35. The interface bonding mechanism and related mechanical properties of Mg/Al compound materials fabricated by insert molding10.1016/j.msea.2015.03.074 ↗
36. Preparation of 2024-Al/AZ31-Mg Laminated Composite by Powder Metallurgy Integrated Forming and Sintering10.1007/s11837-020-04303-4 ↗
37. Effect of inert gas-shielding on the interface and mechanical properties of Mg/Al explosive welding composite plate10.1016/j.jmapro.2019.07.007 ↗
38. Effects of Zr interlayer on microstructure, mechanical property andcorrosion behavior of Al/Mg dissimilar friction stir welding lap joints10.1016/j.matchar.2023.112826 ↗