journal article·2025-12

Design strategies for Fe-based diamond composites with nanocrystalline/amorphous composite interfacial structure for high bending strength

Xinyue Mao, Qingnan Meng, Mu Yuan, Sifan Wang, Shiyin Huang, Yuting Qiu

Materials & Design· Volume 260
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Effects of different binder systems on the characteristics of metal-based diamond composites fabricated via fused deposition modeling and sintering technology10.1016/j.ijrmhm.2024.106775 ↗
2. Diamond tool bits with iron alloys as the binding matrices10.1016/S0254-0584(01)00419-9 ↗
3. Effects of rare earth and sintering temperature on the transverse rupture strength of Fe-based diamond composites10.1016/S0924-0136(02)00593-9 ↗
4. Thermal properties of tungsten/tungsten carbide-coated double-size diamond/copper composite10.1016/j.diamond.2023.109818 ↗
5. High thermal conductivity and strong interface bonding of a hot-forged Cu/Ti-coated-diamond composite10.1016/j.carbon.2020.07.001 ↗
6. Mechanical properties of Al matrix composite reinforced with diamond particles with W coatings prepared by the magnetron sputtering method10.1016/j.jallcom.2017.11.183 ↗
7. Effect of nanometer TiC coated diamond on the strength and thermal conductivity of diamond/Al composites10.1016/j.matchemphys.2016.07.030 ↗
8. Thermal expansion, molar volume and specific heat of diamond from 0 to 3000K10.1007/BF02666175 ↗
9. A systematic study on linear thermal expansion coefficient of metals based on interferometric measurement with Fresnel bimirror10.1002/mop.34178 ↗
10. Process strategy for crack-free production of diamond-reinforced metal matrix composites with minimal graphitization through laser powder bed fusion10.1016/j.diamond.2023.109788 ↗
11. Influence of B4C coating on graphitization for diamond/WC-Fe-Ni composite10.1016/j.ijrmhm.2020.105208 ↗
12. CVD synthesis of nanometer SiC coating on diamond particles10.1016/j.ceramint.2021.02.192 ↗
13. Fabrication of tungsten carbide–diamond composites using SiC-coated diamond10.1016/j.ijrmhm.2019.105053 ↗
14. Comparison of abrasive wear in diamond composites and WC-based coatings10.1016/j.wear.2011.01.049 ↗
15. The influence of morphology and composition of metal–carbide coatings deposited on the diamond surface on the properties of copper–diamond composites10.1016/j.surfcoat.2020.126272 ↗
16. Selective laser melting and mechanical behavior of Mo-coated diamond particle reinforced metal matrix composites10.1016/j.diamond.2024.110952 ↗
17. Mo2C interface layer: effect on the interface strength and cutting performance of diamond/Fe-Ni-WC composites10.1016/j.jmrt.2023.06.098 ↗
18. Preparation of copper–diamond composites with chromium carbide coatings on diamond particles for heat sink applications10.1016/j.applthermaleng.2013.05.038 ↗
19. Double layer interfacial structure of Cr3C2–Cr7C3 in copper/diamond composites for thermal management applications10.1016/j.applthermaleng.2024.123958 ↗
20. Interfacial engineering in diamond/cu composites: from W-WC single-layer optimization to W[sbnd]Cu dual-layer Interface for high-temperature thermal properties and stability10.1016/j.diamond.2025.112408 ↗
21. Preparation of the gradient Mo layers on diamond grits by spark plasma sintering and their effect on Fe-based matrix diamond composites10.1016/j.jallcom.2016.10.172 ↗
22. Effect of diffusion barrier and interfacial strengthening on the interface behavior between high entropy alloy and diamond10.1016/j.jallcom.2020.157023 ↗
23. Thermal-mechanical evolution behaviors of metal matrix diamond composite by powder bed fusion-laser beam10.1016/j.jmrt.2024.06.106 ↗
24. Nanostructure and properties of TiC/a-C:H composite coatings10.1016/j.actamat.2005.05.045 ↗
25. Amorphous thickness-dependent strengthening-softening transition in crystalline-amorphous nanocomposites10.1021/acs.nanolett.3c03848 ↗
26. Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility10.1038/ncomms10802 ↗
27. Enhancing strength and ductility via crystalline-amorphous nanoarchitectures in TiZr-based alloys10.1126/sciadv.abm2884 ↗
28. Amorphous shear bands in crystalline materials as drivers of plasticity10.1038/s41563-023-01597-y ↗
29. Ceramic TiC/a:C protective nanocomposite coatings: Structure and composition versus mechanical properties and tribology10.1016/j.ceramint.2016.04.164 ↗
30. Oxidation mechanism and high-temperature strength of Mo–B–C-coated diamonds in the 700°C–1200°C temperature range10.1016/j.jmrt.2024.10.249 ↗
31. Structure, microstructure and mechanical properties of PM Fe-Cu-Co alloys10.1016/j.matdes.2009.07.027 ↗
32. Effect of Fe: Cu ratio on microstructure and mechanical properties of Fe-Co-Cu-based diamond tools10.1016/j.jmrt.2024.01.104 ↗
33. Effect of basalt fiber particles on the holding strength and wear resistance of sintered Cu-based diamond composites10.1016/j.ceramint.2024.04.163 ↗
34. Low content and free cobalt matrixes for diamond tools10.1016/j.wear.2005.02.076 ↗
35. Interfacial characteristics and grinding performance of diamond specimens brazed with Cu-Sn-Ti alloy and Ti3AlC2-metal composite filler metal10.1016/j.diamond.2022.109637 ↗
36. Effect of Mo2B5 coating on diamond graphitization and cutting performance of Fe-based diamond composites
37. Mechanical properties and microstructural characteristics of WC-bronze-based impregnated diamond composite reinforced by nano-NbC10.1016/j.triboint.2022.107777 ↗
38. Fabrication of diamond enhanced WC-Ni composites by spark plasma sintering10.1016/j.ijrmhm.2021.105732 ↗
39. Mechanochemical synthesis of MoB2 and Mo2B510.1016/S0925-8388(00)01082-3 ↗
40. Multiphase reaction diffusion in transition metal-boron systems10.1016/S0925-8388(97)00342-3 ↗
41. Magnetic transformation of Zn-substituted Mg-Co ferrite nanoparticles: Hard magnetism → soft magnetism10.1016/j.jmmm.2020.166623 ↗
42. Effect of TiO 2 /Al 2 O 3 film coated diamond abrasive particles by sol-gel technique10.1016/j.apsusc.2011.01.101 ↗
43. Boron carbide structure by Raman spectroscopy10.1103/PhysRevB.40.5649 ↗
44. Structural, mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering10.1016/j.surfcoat.2011.07.021 ↗
45. Nanostructural and mechanical properties of nanocomposite nc-TiC/a-C:H films deposited by reactive unbalanced magnetron sputtering10.1063/1.1650898 ↗
46. Synthesis and microstructure evolution during vacuum sintering of Mo 2FeB2 based cermets10.1016/j.ijrmhm.2014.03.010 ↗
47. The evolution mechanism of an FeMo alloy catalyst for growth of single-walled carbon nanotubes10.1039/D2CP03182E ↗
48. Sintering Mechanism and Physical Properties of Mo2FeB2 Type complex Boride
49. Elastic properties and electronic structure of Mo2 FeB2 alloyed with Cr, Ni and Mn by first-principles calculations10.1142/S021798491750138X ↗
50. Anisotropic thermal conductivity and associated heat transport mechanism in roll-to-roll graphene reinforced copper matrix composites10.1016/j.actamat.2020.07.021 ↗
51. Young’s modulus of single crystalline iron and elastic stiffness
52. Thermal-expansion stresses in reinforced plastics
53. Simultaneously increasing the mechanical properties and corrosion resistance of B4C/Al composites via forming “TiO2–Al” interfacial layer10.1016/j.ceramint.2024.06.120 ↗
54. First-principles calculations of structural, electronic, magnetic and elastic properties of Mo2FeB2 under high pressure10.1098/rsos.172247 ↗
55. Effects of shape and alignment of reinforcing graphite phases on the thermal conductivity and the coefficient of thermal expansion of graphite/copper composites10.1016/j.carbon.2019.04.055 ↗
56. Nanomechanical and nanotribological properties of carbon-based thin films: a review10.1016/j.ijrmhm.2009.08.003 ↗
57. Modeling Young’s modulus of rubber-clay nanocomposites using composite theories10.1016/j.polymertesting.2004.05.004 ↗
58. Numerical investigation on stress concentration of surface notch on blades10.1016/j.engfailanal.2021.105241 ↗
59. Achieving superior matching of strength, plasticity, and strain hardening in multilayers by introducing metastable amorphous interface phase10.1016/j.scriptamat.2024.116258 ↗
60. Strain rate sensitivity of nanolayered Cu/X (X=Cr, Zr) micropillars: Effects of heterophase interface/twin boundary10.1016/j.msea.2014.06.025 ↗
61. Deformability of ultrahigh strength 5 nm Cu/Nb nanolayered composites10.1063/1.2938921 ↗
62. Effect of B2 morphology on the mechanical properties of B2-strengthened lightweight steels10.1016/j.scriptamat.2019.02.013 ↗
63. Simultaneous improvement of strength and ductility in a P-doped CrCoNi medium-entropy alloy10.1016/j.jmst.2024.05.020 ↗
64. Ductile crystalline–amorphous nanolaminates10.1073/pnas.0702344104 ↗
65. Bypassing shear band nucleation and ductilization of an amorphous-crystalline nanolaminate in tension10.1016/j.intermet.2008.06.018 ↗
66. Development of low-stress SiC coating on single crystal Si using low elastic modulus SiOC amorphous buffer layer10.1016/j.jnoncrysol.2024.122908 ↗
67. Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity10.1038/s41467-019-13087-4 ↗
68. Effect of multi-interfacial structure on fracture resistance of composite TiSiN/Ag/TiSiN multilayer coating10.1016/j.tsf.2018.03.029 ↗
69. Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening10.1016/j.msea.2012.09.076 ↗
70. Constructing a gradient modulus interface layer on the surface of carbon fibers to enhance the mechanical properties of carbon fiber/epoxy composites at different temperatures10.1016/j.compositesb.2024.111190 ↗
71. Fracture behavior of particle reinforced metal matrix composites10.1016/j.compositesa.2007.10.018 ↗