journal article·2009-10-09

Optimized La0.6Sr0.4CoO3–δ Thin‐Film Electrodes with Extremely Fast Oxygen‐Reduction Kinetics

Judith Januschewsky, Martin Ahrens, Alexander Opitz, Frank Kubel, Jürgen Fleig

Advanced Functional Materials· Volume 19· Issue 19
Publisher page

Abstract

Abstract La0.6Sr0.4CoO3–δ (LSC) thin‐film electrodes are prepared on yttria‐stabilized zirconia (YSZ) substrates by pulsed laser deposition at different deposition temperatures. The decrease of the film crystallinity, occurring when the deposition temperature is lowered, is accompanied by a strong increase of the electrochemical oxygen exchange rate of LSC. For more or less X‐ray diffraction (XRD)‐amorphous electrodes deposited between ca. 340 and 510 °C polarization resistances as low as 0.1 Ω cm2 can be obtained at 600 °C. Such films also exhibit the best stability of the polarization resistance while electrodes deposited at higher temperatures show a strong and fast degradation of the electrochemical kinetics (thermal deactivation). Possible reasons for this behavior and consequences with respect to the preparation of high‐performance solid oxide fuel cell (SOFC) cathodes are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. 10.1002/adma.20080242810.1002/adma.200802428 ↗
2. 10.1021/cr020724o10.1021/cr020724o ↗
3. 10.4028/www.scientific.net/KEM.125-126.18710.4028/www.scientific.net/KEM.125-126.187 ↗
4. 10.1016/j.solidstatesciences.2007.11.02110.1016/j.solidstatesciences.2007.11.021 ↗
5. 10.1016/S0167-2738(00)00649-410.1016/S0167-2738(00)00649-4 ↗
6. 10.1016/S0167-2738(00)00466-510.1016/S0167-2738(00)00466-5 ↗
7. Kawada T. · Proc. Electrochem. Soc. · 2001 · 16 · 529
8. 10.1063/1.139031610.1063/1.1390316 ↗
9. 10.1016/j.ssi.2006.02.04510.1016/j.ssi.2006.02.045 ↗
10. 10.1016/S0167-2738(00)00720-710.1016/S0167-2738(00)00720-7 ↗
11. 10.1016/j.apsusc.2005.01.16810.1016/j.apsusc.2005.01.168 ↗
12. 10.1016/S0167-2738(01)01031-110.1016/S0167-2738(01)01031-1 ↗
13. 10.1016/j.ssi.2004.06.01910.1016/j.ssi.2004.06.019 ↗
14. 10.1016/j.ssi.2005.12.03210.1016/j.ssi.2005.12.032 ↗
15. 10.1016/j.jpowsour.2006.03.06010.1016/j.jpowsour.2006.03.060 ↗
16. 10.1016/j.ssi.2006.01.01810.1016/j.ssi.2006.01.018 ↗
17. 10.1149/1.147972810.1149/1.1479728 ↗
18. 10.1149/1.139401010.1149/1.1394010 ↗
19. 10.1557/PROC-654-AA3.3.110.1557/PROC-654-AA3.3.1 ↗
20. 10.1149/1.275297410.1149/1.2752974 ↗
21. 10.1149/1.203452910.1149/1.2034529 ↗
22. 10.1016/j.ssi.2008.02.05910.1016/j.ssi.2008.02.059 ↗
23. 10.1039/b100180i10.1039/b100180i ↗
24. 10.1016/S0167-2738(02)00274-610.1016/S0167-2738(02)00274-6 ↗
25. 10.1016/j.ssi.2004.07.03510.1016/j.ssi.2004.07.035 ↗
26. A.Schintlmeister J.Januschewsky H.Hutter J.Fleig unpublished.
27. 10.1007/BF0113242210.1007/BF01132422 ↗
28. 10.1016/j.jpowsour.2007.10.09210.1016/j.jpowsour.2007.10.092 ↗
29. 10.1016/S0167-2738(02)00503-910.1016/S0167-2738(02)00503-9 ↗
30. M.Pechini US Patent1967 No.3.330.697.