Source abstract
Abstract
Abstract Indium antimony is a direct, narrow bandgap III–V semiconductor with ultrahigh carrier mobility and an attractive optoelectronic device candidate for use in the visible to infrared region. Here, an infrared (IR) photodetector based on high‐quality InSb nanosheets (NSs) is presented, which shows a clear photoresponse over a broad spectral range from visible (637 nm) to infrared (4.3 µm). Due to the high surface‐to‐volume ratio of nanostructured materials, defects on the sample surface can affect performance, which is a disadvantage for the ambipolar InSb photodetectors. To eliminate the impact of sample surface defects on performance, the surface of the sample is passivated with a ferroelectric film and the mechanism of increased sensitivity is explored. After covering the protective layer, the performance of the detector is greatly improved. The responsivity and detectivity of the photodetector are 311.5 AW−1 and 9.8 × 109 Jones, respectively. Compared with devices before passivation, the dark current is two orders of magnitude lower, the responsivity is 20 times higher, and the photoresponse time is shortened from seconds to the order of milliseconds. These InSb NSs with their outstanding photoelectric properties have great potential for developing next‐generation nanoscale optoelectronic devices.
Source: crossref · Quality: baseline
Affiliations
State Key Laboratory of Infrared Physics Shanghai Institute of Technical Physics Chinese Academy of Sciences 500 Yu Tian Road Shanghai 200083 China
University of Chinese Academy of Sciences 19 Yuquan Road Beijing 100049 China
State Key Laboratory of Superlattices and Microstructures Institute of Semiconductors Chinese Academy of Sciences P.O. Box 912 Beijing 100083 China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Shanghai · Youth Innovation Promotion Association of the Chinese Academy of Sciences