Source abstract
Abstract
Abstract Liquid crystalline polymers (LCPs), especially liquid crystalline elastomers (LCEs) can generate ultrahigh shape change amplitude but has lower mechanical strength. Although some attempts have been tried to improve the mechanical performance of LCE, there are still limitations including complicated fabrication and high actuation temperature. Here, a versatile method is reported to fabricate light‐driven actuator by covalently cross‐linking polyurethane (PU) into LCP networks (PULCN). This new scheme is distinct from the previous interpenetrating network strategy, the hydrogen bonds and covalent bonds are used in this study to improve the miscibility of non‐liquid‐crystalline PU and LCP materials and enhance the stability of the composite system. This material not only possesses the shape memory properties of PU but shows shape‐changing behavior of LCPs. With a shrinkage ratio of 20% at the phase transition temperature, the prepared materials reached a maximum mechanical strength of 20 MPa, higher than conventional LCP. Meanwhile, the resulting film shows diverse and programmable initial shapes by constructing crosslinking density gradient across the thickness of the film. By integration of PULCN with near‐infrared light‐responsive polydopamine, local and sequential light control is achieved. This study may provide a new route for the fabrication of programmable and mechanically robust light‐driven soft actuator.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Materials and Mechanics · Polymer composites and self-healing · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Ophthalmology Beijing Anzhen Hospital Capital Medical University Beijing 100029 P. R. China
Institute for Advanced Materials and Technology University of Science and Technology Beijing Beijing 100083 P. R. China
Beijing Advanced Innovation Center for Materials Genome Engineering&School of Materials Science and Engineering Peking University Beijing 100871 P. R. China
Key Laboratory of Polymer Chemistry and Physics of Ministry of Education Peking University Beijing 100871 P. R. China
Institute of Advanced Materials Key Lab of Fluorine and Silicon for Energy Materials and Chemistry of Ministry of Education Jiangxi Normal University Nanchang 330022 P. R. China
Funding
National Natural Science Foundation of China · China Postdoctoral Science Foundation
References (25)
Show source-provided references
11. Guo Y. · ACS Appl. Mater. Interfaces · 2022 · 4 · 6202
14. Zhang J. · Sci.Geol.Sin. · 2020 · 50 · 1546
19. Hou Y. · Chinese JLiq.Cryst.Disp. · 2022 · 37 · 241
21. Cao A. · Adv. Funct. Mater. · 2019 · 29