journal article·2022-06

Macro‐ and Nano‐Porous 3D‐Hierarchical Carbon Lattices for Extraordinarily High Capacitance Supercapacitors

Yuto Katsuyama, Nagihiro Haba, Hiroaki Kobayashi, Kazuyuki Iwase, Akira Kudo, Itaru Honma, Richard B. Kaner

Advanced Functional Materials· Volume 32· Issue 24
Publisher page

Abstract

Abstract Supercapacitors, which can be charged/discharged rapidly, play important roles in a sustainable society. Thick electrodes can reduce the ratio of inactive components in the overall cell while simultaneously improving energy and power densities. However, thick electrodes induce longer ion diffusion pathways, and capacitance drops dramatically after a certain thickness. To overcome this, precisely designed macro‐ and nano‐porous 3D‐hierarchical carbon lattices, where ions can diffuse freely inside the electrode, are prepared by combining an inexpensive stereolithography‐type 3D printer, whose resolution is 50 µm, with a simple CO2 activation process. The activated 3D carbon lattice with a 66% burn‐off ratio (3D‐CL‐A66%) has ordered macropores (≈150 µm) and uniform nanopores (2–3 nm), exhibiting a maximum areal capacitance of 5251 mF cm–2 at 3 mA cm–2. Furthermore, manganese oxide is electrochemically deposited on 3D‐CL‐A16% for 8 min (3D‐CL‐A16%‐MnO2‐8 min), increasing the areal capacitance by 2.5‐times. Finally, an all‐3D‐printed asymmetric 1.8 V supercapacitor is prepared by combining 3D‐CL‐A16%‐MnO2‐8 min and 3D‐CL‐A66% as the positive and negative electrodes, respectively, demonstrating a maximum energy density of 0.808 mWh cm–2 at a power density of 2.48 mW cm–2. The achieved values are one of the highest areal energy and power densities reported so far.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Electrocatalysts for Energy Conversion · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemistry & Biochemistry University of California Los Angeles Los Angeles California 90095‐1569 USA

Institute of Multidisciplinary Research for Advanced Materials Tohoku University Sendai Miyagi 980‐8577 Japan

Advanced Institute for Materials Research Tohoku University Sendai Miyagi 980‐8577 Japan

References (69)

Show source-provided references
1. IEA · 2020
2. 10.1109/TASE.2020.298626910.1109/TASE.2020.2986269 ↗
3. 10.1016/j.renene.2020.09.04210.1016/j.renene.2020.09.042 ↗
4. M. G.Molina in 2012 Sixth IEEE/PES Transmission and Distribution: Latin America Conference and Exposition (T D‐LA) 2012.
5. 2020
6. 2015
7. 10.1002/adfm.20180919610.1002/adfm.201809196 ↗
8. 10.1039/C6EE03716J10.1039/C6EE03716J ↗
9. 10.1002/aenm.20190145710.1002/aenm.201901457 ↗
10. 10.1039/C6EE00941G10.1039/C6EE00941G ↗
11. 10.1016/S0378-7753(98)00038-X10.1016/S0378-7753(98)00038-X ↗
12. 10.1016/j.cej.2021.12876710.1016/j.cej.2021.128767 ↗
13. 10.1016/j.jpowsour.2004.02.02710.1016/j.jpowsour.2004.02.027 ↗
14. 10.1149/2.F05081IF10.1149/2.F05081IF ↗
15. 10.1002/adma.20110429510.1002/adma.201104295 ↗
16. 10.1016/j.carbon.2020.12.05110.1016/j.carbon.2020.12.051 ↗
17. 10.1038/nenergy.2016.9910.1038/nenergy.2016.99 ↗
18. 10.1016/j.ensm.2020.07.02010.1016/j.ensm.2020.07.020 ↗
19. 10.1016/j.nanoen.2015.03.03310.1016/j.nanoen.2015.03.033 ↗
20. 10.1016/j.electacta.2019.02.00410.1016/j.electacta.2019.02.004 ↗
21. 10.1002/cssc.20160077910.1002/cssc.201600779 ↗
22. 10.1002/ange.20070272110.1002/ange.200702721 ↗
23. 10.1038/natrevmats.2016.9810.1038/natrevmats.2016.98 ↗
24. 10.1038/s41598-022-07853-610.1038/s41598-022-07853-6 ↗
25. 10.1016/j.biombioe.2018.08.01710.1016/j.biombioe.2018.08.017 ↗
26. 10.1039/C5TA02584B10.1039/C5TA02584B ↗
27. 10.1002/advs.20160040810.1002/advs.201600408 ↗
28. 10.1002/aenm.20160037710.1002/aenm.201600377 ↗
29. 10.1002/adma.20190665210.1002/adma.201906652 ↗
30. 10.1016/j.joule.2018.09.02010.1016/j.joule.2018.09.020 ↗
31. 10.1016/j.jpowsour.2017.04.04210.1016/j.jpowsour.2017.04.042 ↗
32. 10.1039/D0MA00753F10.1039/D0MA00753F ↗
33. 10.1016/j.mtnano.2020.10009410.1016/j.mtnano.2020.100094 ↗
34. “ELEGOO Mars 2 Pro Mono LCD MSLA Resin 3D Printer with Air Purifier ” can be found underhttps://www.elegoo.com/products/elegoo-mars-2-pro-mono-lcd-3d-printer (accessed: October2021).
35. 10.1038/s43246-020-00073-310.1038/s43246-020-00073-3 ↗
36. 10.3389/fmats.2019.0016910.3389/fmats.2019.00169 ↗
37. 10.1002/aenm.20200263710.1002/aenm.202002637 ↗
38. 10.1002/adem.20200008310.1002/adem.202000083 ↗
39. 10.1007/s10086-007-0879-710.1007/s10086-007-0879-7 ↗
40. 10.3390/cryst1102015310.3390/cryst11020153 ↗
41. 10.1002/adsu.20190008310.1002/adsu.201900083 ↗
42. 10.1002/aenm.20200028310.1002/aenm.202000283 ↗
43. 10.1016/j.jpowsour.2019.05.01310.1016/j.jpowsour.2019.05.013 ↗
44. 10.1002/cssc.20200183710.1002/cssc.202001837 ↗
45. 10.1016/j.jpowsour.2006.02.06510.1016/j.jpowsour.2006.02.065 ↗
46. 10.1016/j.est.2019.10098110.1016/j.est.2019.100981 ↗
47. 10.1149/2.0811908jes10.1149/2.0811908jes ↗
48. 10.1063/1.502120910.1063/1.5021209 ↗
49. 10.1063/1.502122910.1063/1.5021229 ↗
50. 10.1039/C9NA00543A10.1039/C9NA00543A ↗
51. 10.1073/pnas.142039811210.1073/pnas.1420398112 ↗
52. 10.1007/s10853-019-03998-410.1007/s10853-019-03998-4 ↗
53. Wan C. · Int. J. Electrochem. Sci. · 2014 · 9 · 15
54. 10.1007/s40820-019-0316-710.1007/s40820-019-0316-7 ↗
55. 10.1039/D1TA04850C10.1039/D1TA04850C ↗
56. 10.3390/ma1411299010.3390/ma14112990 ↗
57. 10.1149/1.181515110.1149/1.1815151 ↗
58. 10.1149/2.0091714jes10.1149/2.0091714jes ↗
59. 10.1016/j.jpowsour.2012.02.04810.1016/j.jpowsour.2012.02.048 ↗
60. 10.1149/1.355546910.1149/1.3555469 ↗
61. 10.1021/acsami.6b0488310.1021/acsami.6b04883 ↗
62. 10.1149/2.0051510jes10.1149/2.0051510jes ↗
63. 10.1002/aenm.20180040810.1002/aenm.201800408 ↗
64. 10.1016/j.carbon.2017.11.00310.1016/j.carbon.2017.11.003 ↗
65. 10.1016/j.nanoen.2018.06.07210.1016/j.nanoen.2018.06.072 ↗
66. 10.1002/adfm.20170510710.1002/adfm.201705107 ↗
67. 10.1038/nnano.2010.16210.1038/nnano.2010.162 ↗
68. 10.1016/j.materresbull.2017.04.01210.1016/j.materresbull.2017.04.012 ↗
69. “ELEGOO Standard L. C. D. UV‐Curing Photopolymer Rapid Resin for 3D Printers ” can be found underhttps://www.elegoo.com/products/elegoo-standard-resin (accessed: October2021).