journal article·2022-12Open access

Topography‐Supported Nanoarchitectonics of Hybrid Scaffold for Systematically Modulated Bone Regeneration and Remodeling

Tae‐Sik Jang, Seong Je Park, Ji Eun Lee, Jeongho Yang, Suk‐Hee Park, Martin Byung‐Guk Jun, Young Won Kim, Clodualdo Aranas, Joon Phil Choi, Yu Zou, Rigoberto C. Advincula, Yufeng Zheng, Hae Lin Jang, Nam‐Joon Cho, Hyun‐Do Jung, Sang Hoon Kim

Advanced Functional Materials· Volume 32· Issue 51

Abstract

Abstract Orthopedic implants should have sufficient strength and promote bone tissue regeneration. However, most conventional implants are optimized for use either under high mechanical load or for active osseointegration. To achieve the dual target of mechanical durability and biocompatibility, polyether ether ketone (PEEK) filaments reinforced with internal titanium dioxide (TiO2) nanoparticles via dopamine‐induced polymerization are additively manufactured into an orthopedic implant through material extrusion (ME). The exterior of the PEEK/TiO2 composite is coated with hydroxyapatite (HA) using radiofrequency (RF) magnetron sputtering to increase both the strength and biocompatibility provided by homogeneous ceramic–ceramic interactions and the protuberant nanoscale topography between the internal TiO2 nanoparticle reinforcement and external HA coating. The hardness, tensile, and compression, and scratch test results demonstrate a considerable enhancement in the mechanical strength of the hierarchical PEEK/TiO2/HA hybrid composite structure compared to that of the conventional 3D‐printed PEEK. Furthermore, PEEK with internal TiO2 reinforcement improves the proliferation and differentiation of bone cells in vitro, whereas the external HA coating leads to a more prevalent osteoblast absorption. Micro‐computed tomography and histological analyses confirm new bone formation and a high bone‐to‐implant contact ratio on the HA‐coated PEEK structure reinforced with TiO2 nanoparticles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering Chosun University Gwangju 61452 Republic of Korea

Department of Mechanical Design Engineering Hanyang University Seoul 04763 Republic of Korea

Advanced Joining and Additive Manufacturing R&D Department Korea Institute of Industrial Technology Siheung Gyeonggi‐do 15014 Republic of Korea

Advanced Textile R&D Department Korea Institute of Industrial Technology Ansan Gyeonggi‐do 15588 Republic of Korea

School of Mechanical Engineering Pusan National University Busan 46241 Republic of Korea

School of Mechanical Engineering Purdue University West Lafayette IN 47907 USA

Department of Mechanical Engineering University of New Brunswick Fredericton New Brunswick E3B 5A3 Canada

Department of 3D Printing Korea Institute of Machinery & Materials Daejeon 34103 Republic of Korea

Department of Materials Science and Engineering University of Toronto Toronto Ontario M5S 3E4 Canada

Department of Macromolecular Science and Engineering Case Western Reserve University Cleveland OH 44106 USA

Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials University of Tennessee Knoxville TN 37996 USA

Center for Nanophase Materials and Sciences Oak Ridge National Laboratory Oak Ridge TN 37830 USA

School of Materials Science and Engineering Peking University Beijing 100871 China

Center for Engineered Therapeutics Department of Medicine and Orthopedic Surgery Brigham and Women's Hospital Harvard Medical School Boston MA 02115 USA

School of Materials Science and Engineering Nanyang Technological University Singapore 637553 Singapore

Department of Biotechnology The Catholic University of Korea Bucheon Gyeonggi‐do 14662 Republic of Korea

Department of Biomedical and Chemical Engineering (BMCE) The Catholic University of Korea Bucheon Gyeonggi‐do 14662 Republic of Korea

Funding

Ministry of Education · National Research Foundation of Korea · Ministry of Health and Welfare · Catholic University of Korea

References (52)

Show source-provided references
1. 10.1002/adfm.20220353310.1002/adfm.202203533 ↗
2. 10.1002/adfm.20210624910.1002/adfm.202106249 ↗
3. 10.1002/adfm.20180791510.1002/adfm.201807915 ↗
4. 10.1038/s41563-020-0768-710.1038/s41563-020-0768-7 ↗
5. 10.1021/acs.chemrev.7b0007410.1021/acs.chemrev.7b00074 ↗
6. 10.1016/j.pmatsci.2012.03.00310.1016/j.pmatsci.2012.03.003 ↗
7. 10.1038/nm.416210.1038/nm.4162 ↗
8. 10.1038/nrrheum.2014.5710.1038/nrrheum.2014.57 ↗
9. 10.1002/adma.20190199410.1002/adma.201901994 ↗
10. 10.1016/j.biomaterials.2018.09.00910.1016/j.biomaterials.2018.09.009 ↗
11. 10.1002/adma.20200296210.1002/adma.202002962 ↗
12. 10.1016/j.pmatsci.2019.10058810.1016/j.pmatsci.2019.100588 ↗
13. 10.1002/adfm.20180448310.1002/adfm.201804483 ↗
14. 10.1088/1758-5090/ab376b10.1088/1758-5090/ab376b ↗
15. 10.1016/j.spinee.2014.12.01810.1016/j.spinee.2014.12.018 ↗
16. 10.1039/C4MT00133H10.1039/C4MT00133H ↗
17. 10.1177/002203451036367510.1177/0022034510363675 ↗
18. 10.1016/j.spinee.2018.01.00310.1016/j.spinee.2018.01.003 ↗
19. 10.1186/s40729-019-0162-x10.1186/s40729-019-0162-x ↗
20. 10.1016/S0142-9612(02)00508-210.1016/S0142-9612(02)00508-2 ↗
21. 10.1016/j.pmatsci.2008.06.00410.1016/j.pmatsci.2008.06.004 ↗
22. 10.1002/adfm.20140070610.1002/adfm.201400706 ↗
23. 10.1038/s41578-020-0204-210.1038/s41578-020-0204-2 ↗
24. 10.1002/adfm.20120161110.1002/adfm.201201611 ↗
25. 10.1021/acsami.5b0021010.1021/acsami.5b00210 ↗
26. 10.1016/j.biomaterials.2015.02.01810.1016/j.biomaterials.2015.02.018 ↗
27. 10.1016/j.biomaterials.2012.09.02110.1016/j.biomaterials.2012.09.021 ↗
28. 10.1021/acsnano.5b0391810.1021/acsnano.5b03918 ↗
29. 10.1126/scitranslmed.aaf770410.1126/scitranslmed.aaf7704 ↗
30. 10.1002/adfm.20160478410.1002/adfm.201604784 ↗
31. Ma C. · 2018 · E11741
32. 10.1002/adfm.20170343810.1002/adfm.201703438 ↗
33. 10.1021/acsnano.8b0236510.1021/acsnano.8b02365 ↗
34. 10.1021/ar500273y10.1021/ar500273y ↗
35. 10.1002/adma.20170302610.1002/adma.201703026 ↗
36. 10.1021/cr400407a10.1021/cr400407a ↗
37. 10.1039/c2jm15665b10.1039/c2jm15665b ↗
38. 10.1016/j.tca.2020.17853010.1016/j.tca.2020.178530 ↗
39. 10.1016/j.msec.2020.11140610.1016/j.msec.2020.111406 ↗
40. 10.1126/science.124247710.1126/science.1242477 ↗
41. 10.1002/admt.20200108410.1002/admt.202001084 ↗
42. 10.1016/j.msec.2014.06.03210.1016/j.msec.2014.06.032 ↗
43. 10.1016/j.matlet.2016.12.04010.1016/j.matlet.2016.12.040 ↗
44. 10.1016/j.biomaterials.2014.10.02710.1016/j.biomaterials.2014.10.027 ↗
45. 10.1016/j.biomaterials.2019.11946110.1016/j.biomaterials.2019.119461 ↗
46. 10.1016/j.bioactmat.2020.10.00710.1016/j.bioactmat.2020.10.007 ↗
47. 10.1016/j.mser.2009.05.00110.1016/j.mser.2009.05.001 ↗
48. 10.1002/adfm.20210627610.1002/adfm.202106276 ↗
49. 10.1002/smll.20180134910.1002/smll.201801349 ↗
50. 10.1080/17452759.2020.181891710.1080/17452759.2020.1818917 ↗
51. 10.1021/acsami.9b0415910.1021/acsami.9b04159 ↗
52. 10.1016/j.bioactmat.2021.07.00310.1016/j.bioactmat.2021.07.003 ↗