Source abstract
Abstract
Abstract Impurity doping at the nanoscale for silicon is becoming less efficient with conventional techniques. Here, an alternative virtual doping method is presented for silicon that can achieve an equivalent carrier density while addressing the primary limitations of traditional doping methods. The doping for silicon is carried out by placing aluminum‐induced acceptor states externally in a silicon dioxide dielectric shell. This technique can be referred to as direct modulation doping. The resistivity, carrier density, and mobility are investigated by Hall effect measurements to characterize the carrier transport using the new doping method. The results thereof are compared with carrier transport analysis of conventionally doped silicon at room‐temperature, demonstrating a 100% increase in carrier mobility at equal carrier density. The sheet density of hole carriers in silicon due to modulation doping remains nearly constant, ≈4.7 × 1012 cm−2 over a wide temperature range from 300 down to 2 K, proving that modulation‐doped devices do not undergo carrier freeze‐out at cryogenic temperatures. In addition, a mobility enhancement is demonstrated with an increase from 89 cm2 Vs−1 at 300 K to 227 cm2 Vs−1 at 10 K, highlighting the benefits of the new method for creating emerging nanoscale electronic devices or peripheral cryo‐electronics to quantum computing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Semiconductor Devices and Circuit Design · Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NaMLab gGmbH Nöthnitzer Str. 64a 01187 Dresden Germany
Technische Universität Dresden Electrical and Computer Engineering Institute of Semiconductors and Microsystems Nöthnitzer Str.64 01187 Dresden Germany
Technische Universität Bergakademie Freiberg Institute of Applied Physics (IAP) Leipziger Str. 23 09599 Freiberg Germany
Max Planck Institute for Chemical Physics of Solids Dresden Nöthnitzer Str. 40 01187 Dresden Germany
Integrated Materials Design Lab (IMDL) Australian National University (ANU) Canberra ACT 2601 Australia
Institute of Semiconductor Electronics (IHT) RWTH Aachen University 52074 Aachen Germany
Funding
Deutsche Forschungsgemeinschaft
References (32)
Show source-provided references
19. S.Nagarajan D.Hiller I.Ratschinski J.Knoch T.Mikolajick J.Trommer presented at2023 Device Research Conf. (DRC) Santa Barbara CA USA July 2023.
23. Sze S. M. · 2007