A Facilely‐Fabricated Electret‐based Flexible Vibration Sensor Featuring A Multifunctional PDMS Seismic Mass for Enhanced Sensitivity and Durability
Source abstract
Abstract
Abstract Electrets can be used to develop self‐powered vibration sensors that rely on charged dielectrics to measure vibration parameters. A critical challenge in the sensor design is to simultaneously enlarge vibration amplitude and maintain a high surface voltage of the electret. In this study, an electret‐based flexible vibration sensor (E‐FVS) featuring a multifunctional PDMS seismic mass (MPSM) is proposed. Fabricated via molding, the MPSM comprises three parts: 1) a protruded additional mass for increasing the resonance vibration amplitude to enhance peak sensitivity, 2) a perforated film that reduces air damping to improve the overall sensitivity, and 3) a micro‐protrusion stopper that improves the durability by suppressing contact discharge in case of exposure to unexpectedly large accelerations. The E‐FVS operates effectively with excellent sensitivity (up to 1.154 V·g −1 ) in a frequency range of 15–600 Hz and good linearity ( R 2 > 0.99) within an acceleration range of 0–5 g . Remarkably, the output voltage of the sensor has only attenuated by 0.75% after one million vibration tests. Combined with deep learning, the E‐FVS achieves a 99.17% accuracy in state identification of a self‐made fan. Monitoring of other vibrating machinery and human motion is also demonstrated, showing the sensor's broad application scenario.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced MEMS and NEMS Technologies · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Robotics and Systems Harbin Institute of Technology Harbin 150001 China
Zhengzhou Research Institute Harbin Institute of Technology Zhengzhou 450000 China
School of Medicine and Health Harbin Institute of Technology Harbin 150001 China
Funding
National Key Research and Development Program of China · National Natural Science Foundation of China
References (60)
Show source-provided references
1. Lee J.‐H. · Adv. Mater. · 2023 · 35
2. 10.1002/adfm.20200155310.1002/adfm.202001553 ↗
3. 10.1002/aenm.20220113210.1002/aenm.202201132 ↗
4. 10.1002/adma.20230688010.1002/adma.202306880 ↗
5. 10.1016/j.ymssp.2021.10789010.1016/j.ymssp.2021.107890 ↗
6. 10.1109/TIE.2020.304479210.1109/TIE.2020.3044792 ↗
7. 10.1021/acsami.3c0041810.1021/acsami.3c00418 ↗
8. 10.1002/advs.20230119910.1002/advs.202301199 ↗
9. 10.1021/acsaelm.4c0128310.1021/acsaelm.4c01283 ↗
10. 10.1021/acsami.2c0873410.1021/acsami.2c08734 ↗
11. 10.1021/acsami.1c0996310.1021/acsami.1c09963 ↗
12. 10.1002/smll.20220204710.1002/smll.202202047 ↗
13. 10.1039/D3MH01719B10.1039/D3MH01719B ↗
14. 10.1002/adma.20210954510.1002/adma.202109545 ↗
15. 10.1126/sciadv.abj922010.1126/sciadv.abj9220 ↗
16. 10.1109/JIOT.2024.338210110.1109/JIOT.2024.3382101 ↗
17. 10.1038/s41467-019-10465-w10.1038/s41467-019-10465-w ↗
18. 10.1016/j.matt.2022.11.02310.1016/j.matt.2022.11.023 ↗
19. 10.1038/s41586-022-04476-910.1038/s41586-022-04476-9 ↗
20. 10.1109/JSEN.2024.335240210.1109/JSEN.2024.3352402 ↗
21. 10.1109/TIE.2019.289754810.1109/TIE.2019.2897548 ↗
22. 10.1109/JSEN.2023.323419510.1109/JSEN.2023.3234195 ↗
23. 10.1038/s41378-024-00704-610.1038/s41378-024-00704-6 ↗
24. 10.1038/s41378-023-00628-710.1038/s41378-023-00628-7 ↗
25. 10.1109/JSEN.2022.315540710.1109/JSEN.2022.3155407 ↗
26. 10.1002/smll.20230975910.1002/smll.202309759 ↗
27. 10.1002/smll.20230768010.1002/smll.202307680 ↗
28. 10.1016/j.nanoen.2022.10766710.1016/j.nanoen.2022.107667 ↗
29. 10.1002/adma.20240150810.1002/adma.202401508 ↗
30. 10.1016/j.nanoen.2023.10906010.1016/j.nanoen.2023.109060 ↗
31. 10.1007/s12274-022-4363-x10.1007/s12274-022-4363-x ↗
32. 10.1016/j.nanoen.2024.11048110.1016/j.nanoen.2024.110481 ↗
33. 10.1002/adfm.20210943010.1002/adfm.202109430 ↗
34. 10.1002/9783527672943.ch810.1002/9783527672943.ch8 ↗
35. 10.1002/adma.20230382710.1002/adma.202303827 ↗
36. 10.1103/RevModPhys.20.45710.1103/RevModPhys.20.457 ↗
37. 10.1038/s41598-017-07747-y10.1038/s41598-017-07747-y ↗
38. 10.1002/tee.2063110.1002/tee.20631 ↗
39. 10.1088/1742-6596/1407/1/01202110.1088/1742-6596/1407/1/012021 ↗
40. 10.1002/adma.20220553710.1002/adma.202205537 ↗
41. 10.1016/j.nanoen.2022.10705710.1016/j.nanoen.2022.107057 ↗
42. 10.1039/C6TA09964E10.1039/C6TA09964E ↗
43. 10.1002/aelm.20150040810.1002/aelm.201500408 ↗
44. 10.1088/1742-6596/557/1/01206210.1088/1742-6596/557/1/012062 ↗
45. K.Fujii T.Onishi K.Sonoda T.Fujita K.Kanda K.Higuchi K.Maenaka in2012 Fifth Int. Conf. on Emerging Trends in Engineering and Technology IEEE Himeji Japan 2012 pp.48–51.10.1109/ICETET.2012.16 ↗
46. J.Boland Y.‐H.Chao Y.Suzuki Y. C.Tai inThe Sixteenth Annual Int. Conf. on Micro Electro Mechanical Systems 2003. MEMS‐03 Kyoto. IEEE IEEE Kyoto Japan 2003 pp.538–541.
47. 10.1109/TDEI.2010.553967010.1109/TDEI.2010.5539670 ↗
48. 10.1109/JSEN.2014.230230010.1109/JSEN.2014.2302300 ↗
49. 10.1088/1742-6596/773/1/01201310.1088/1742-6596/773/1/012013 ↗
50. Y.Tsurumi Y.Suzuki N.Kasagi in2008 IEEE 21st Int. Conf. on Micro Electro Mechanical Systems IEEE Tucson AZ USA2008 pp.511–514.
51. 10.1016/j.enconman.2019.11226410.1016/j.enconman.2019.112264 ↗
52. 10.1016/j.sna.2007.01.00810.1016/j.sna.2007.01.008 ↗
53. 10.1080/14686996.2019.156982810.1080/14686996.2019.1569828 ↗
54. 10.1016/B978-0-08-100573-6.00025-310.1016/B978-0-08-100573-6.00025-3 ↗
55. 10.1016/j.mee.2010.12.10810.1016/j.mee.2010.12.108 ↗
56. 10.1088/0960-1317/19/3/03502810.1088/0960-1317/19/3/035028 ↗
57. 10.1007/s12274-023-5802-z10.1007/s12274-023-5802-z ↗
58. 10.1016/j.nanoen.2023.10892910.1016/j.nanoen.2023.108929 ↗
59. 10.1016/j.nanoen.2024.11055010.1016/j.nanoen.2024.110550 ↗
60. 10.1126/sciadv.160118510.1126/sciadv.1601185 ↗