The Impact of Interfacial Mixing on Förster Transfer at Conjugated Polymer Heterojunctions
Source abstract
Abstract
Abstract Neutron reflectivity and photoluminescence measurements are reported on bilayers of polyfluorene‐based conjugated polymers. By using a novel thermal processing procedure it is possible to control the width of the interface between poly(9,9‐dioctylfluorene) (F8) and poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole) (F8BT), and measure the impact of interfacial roughness on the resonant energy transfer of excitons at the interface (Förster transfer). It is found that increasing the root mean square (rms) roughness of the F8/F8BT interface over the range of ∼1 nm to ∼5 nm leads to a greatly enhanced Förster transfer from F8 to F8BT molecules. By comparing photoluminescence measurements with simple calculations it is concluded that the level of enhancement of the F8BT peak at rough interfaces can only be adequately explained if mixing of F8 and F8BT at a molecular level dominates over the interfacial roughness due to thermally excited capillary waves.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. 10.1021/ma010240e10.1021/ma010240e ↗
2. 10.1002/(SICI)1521-4095(200004)12:7<498::AID-ADMA498>3.0.CO;2-H10.1002/(SICI)1521-4095(200004)12:7<498::AID-ADMA498>3.0.CO;2-H ↗
3. 10.1038/nmat95910.1038/nmat959 ↗
4. 10.1063/1.145655010.1063/1.1456550 ↗
5. 10.1063/1.153704910.1063/1.1537049 ↗
6. 10.1038/nmat147610.1038/nmat1476 ↗
7. 10.1088/0953-8984/17/8/01010.1088/0953-8984/17/8/010 ↗
8. 10.1063/1.189975110.1063/1.1899751 ↗
9. 10.1021/ma060072w10.1021/ma060072w ↗
10. 10.1016/S0009-2614(01)00359-110.1016/S0009-2614(01)00359-1 ↗
11. 10.1002/1521-4095(200106)13:11<810::AID-ADMA810>3.0.CO;2-C10.1002/1521-4095(200106)13:11<810::AID-ADMA810>3.0.CO;2-C ↗
12. 10.1016/S0379-6779(03)00283-210.1016/S0379-6779(03)00283-2 ↗
13. 10.1016/j.orgel.2005.02.00210.1016/j.orgel.2005.02.002 ↗
14. 10.1002/adma.20060171510.1002/adma.200601715 ↗
15. 10.1103/PhysRevLett.78.369310.1103/PhysRevLett.78.3693 ↗
16. 10.1002/adma.20070091710.1002/adma.200700917 ↗
17. Rowlinson J. S. · 1982
18. 10.1017/CBO978051162319610.1017/CBO9780511623196 ↗
19. 10.1098/rspa.1982.005610.1098/rspa.1982.0056 ↗
20. 10.1103/PhysRevLett.56.88910.1103/PhysRevLett.56.889 ↗
21. 10.1088/0305-4470/22/16/00210.1088/0305-4470/22/16/002 ↗
22. 10.1103/PhysRevB.72.04520910.1103/PhysRevB.72.045209 ↗
23. 10.1088/0022-3727/36/4/10110.1088/0022-3727/36/4/101 ↗
24. UV‐vis absorption measurements on annealed dF8 films gave very similar extinction coefficients to literature values for protonated F8 [22] and showed no systematic dependence on annealing temperature. The extinction coefficient of F8BT also remains unchanged after annealing [23].
25. A more complete treatment would calculate the angular dependence of the emission intensity of blue photons from the F8 molecules in region 1 and their subsequent re‐absorption in the F8BT layer. We estimate that if all totally internally reflected blue light is re‐absorbed this would increase the F8BT/F8 ratio by about 30%. This would affect all samples systematically and would be equivalent to an increase in Δxof approximately 2–4 nm compared to the calculation (Fig. 5) where only emission and re‐ absorption normal to the film is considered.
26. A precise value for F8 is not available in the literature. The range of values for other conjugated polymers is from 5nm to 14nm. However the study by Markov et al. [27] claims that the higher end of this range is an overestimation due to interdiffusion within the sample architecture.
27. 10.1021/jp050966310.1021/jp0509663 ↗
28. 10.1103/PhysRevB.59.1534610.1103/PhysRevB.59.15346 ↗
29. 10.1063/1.11579710.1063/1.115797 ↗
30. 10.1021/ja051891j10.1021/ja051891j ↗
31. 10.1103/PhysRevB.77.11533810.1103/PhysRevB.77.115338 ↗
32. 10.1103/PhysRevLett.96.11740310.1103/PhysRevLett.96.117403 ↗
33. 10.1016/S0920-2307(05)80002-710.1016/S0920-2307(05)80002-7 ↗