journal article·2007-05-07

Structural and Electronic Properties of the First Monolayers of Spin‐Cast Poly(fluorene)‐Based Conjugated‐ Polymer Films

H. Plank, R. Güntner, U. Scherf, E. J. W. List

Advanced Functional Materials· Volume 17· Issue 7
Publisher page

Abstract

Abstract This study is an extended investigation on the formation of the first few monolayers of conjugated poly(fluorene)‐based polymer films prepared from solution on defined polar and nonpolar surfaces. In particular, a symmetrical A–B–A triblock copolymer consisting of poly(2‐alkylaniline) as A blocks and poly(9,9‐dialkylfluorene) as B blocks and a poly(9,9‐dialkylfluorene) homopolymer is used for this study. The dependence on drying conditions by means of solvent selection, the influence of a subsequent heat treatment, and the influence of the substrate polarity are investigated for ultrathin films as well as the transition from the first monolayers to the bulk polymer. The study is performed with optical absorption and photoluminescence spectroscopy, and atomic force microscopy to obtain complementary information of optical properties and morphological details. We find that ultrathin films (ca. 1–2 nm) prepared on mica from various solvents form highly defined, flat monolayers at the interface without lateral regularities indicating a dipole–dipole interaction between conjugated‐polymer segments and mica surface dipoles. This is further confirmed by bathochromic photoluminescence shifts observed for the ultrathin layers compared to the bulk polymer. Complementary experiments on nonpolar surfaces, highly oriented pyrolytic graphite (HOPG), show a total absence of defined flat films supporting the assumption of a dipole–dipole assisted formation on mica. For increased film thickness on mica (5 nm and more) the homopolymer does not form any regular structures or ordered layers on top of the monolayer. In contrast, the triblock copolymer, shorter in length, revealed a tendency to form a less‐defined layer‐type growth (3–3.5 nm thick) above the monolayer that was of higher order for higher‐boiling‐point solvents, indicating that the polymers are found in a different conformation. Moreover, one finds that some solvents that show partial immiscibility with the polymer strongly alter the formation of the film. The observations made for the two different types of polymers allow for an assignment of film‐formation driving forces to individual polymer segments and allow for the formulation of a growth model that explains the observed results and indicates the importance of appropriate substrate selection for organic electronic/optoelectronic devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. 10.1002/1521-4095(20020116)14:2<99::AID-ADMA99>3.0.CO;2-910.1002/1521-4095(20020116)14:2<99::AID-ADMA99>3.0.CO;2-9 ↗
2. 10.1016/S1369-7021(02)00637-510.1016/S1369-7021(02)00637-5 ↗
3. 10.1038/1639310.1038/16393 ↗
4. C. J. Brabec V. Dyakonov J. Parisi N. S. Sariciftci Organic Photovoltaics Concepts and Realization Springer London2003.10.1007/978-3-662-05187-0 ↗
5. 10.1002/(SICI)1521-4095(199903)11:5<363::AID-ADMA363>3.0.CO;2-Y10.1002/(SICI)1521-4095(199903)11:5<363::AID-ADMA363>3.0.CO;2-Y ↗
6. 10.1002/adma.20030504710.1002/adma.200305047 ↗
7. 10.1038/2287510.1038/22875 ↗
8. 10.1088/0022-3727/32/24/20110.1088/0022-3727/32/24/201 ↗
9. 10.1016/S0009-2614(00)00635-710.1016/S0009-2614(00)00635-7 ↗
10. 10.1103/PhysRevE.59.329310.1103/PhysRevE.59.3293 ↗
11. 10.1038/419353a10.1038/419353a ↗
12. 10.1002/(SICI)1521-4095(199801)10:2<93::AID-ADMA93>3.0.CO;2-F10.1002/(SICI)1521-4095(199801)10:2<93::AID-ADMA93>3.0.CO;2-F ↗
13. D. Fichou Handb. Oligo‐ Polythiophenes Wiley‐VCH Weinheim Germany1999 17.10.1002/9783527611713 ↗
14. 10.1103/PhysRevB.61.748910.1103/PhysRevB.61.7489 ↗
15. 10.1016/S1010-6030(01)00517-210.1016/S1010-6030(01)00517-2 ↗
16. 10.1021/jp983945010.1021/jp9839450 ↗
17. 10.1021/nl034317j10.1021/nl034317j ↗
18. 10.1109/16.60547110.1109/16.605471 ↗
19. 10.1063/1.12194010.1063/1.121940 ↗
20. 10.1063/1.131063710.1063/1.1310637 ↗
21. W. R. Salaneck K. Seki A. Kahn J.‐J. Pireaux Conjugated Polymer and Molecular Interfaces: Science and Technology for Photonic and Optoelectronic Applications Marcel Dekker New York 2001.10.1201/9780203910870 ↗
22. 10.1063/1.133374010.1063/1.1333740 ↗
23. 10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
24. 10.1063/1.153210210.1063/1.1532102 ↗
25. 10.1063/1.156550610.1063/1.1565506 ↗
26. 10.1021/cr030070z10.1021/cr030070z ↗
27. 10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
28. 10.1103/PhysRevB.67.12540610.1103/PhysRevB.67.125406 ↗
29. 10.1002/polb.1064210.1002/polb.10642 ↗
30. 10.1103/PhysRevLett.91.13610210.1103/PhysRevLett.91.136102 ↗
31. 10.1016/j.apsusc.2004.10.12810.1016/j.apsusc.2004.10.128 ↗
32. 10.1103/PhysRevB.52.1486810.1103/PhysRevB.52.14868 ↗
33. 10.1103/PhysRevB.49.1129710.1103/PhysRevB.49.11297 ↗
34. 10.1103/PhysRevB.61.1129710.1103/PhysRevB.61.11297 ↗
35. 10.1038/3508753210.1038/35087532 ↗
36. 10.1021/ma991216s10.1021/ma991216s ↗
37. 10.1002/1521-4095(200007)12:14<1042::AID-ADMA1042>3.0.CO;2-J10.1002/1521-4095(200007)12:14<1042::AID-ADMA1042>3.0.CO;2-J ↗
38. 10.1021/cm980445a10.1021/cm980445a ↗
39. 10.1016/S0079-6700(02)00033-310.1016/S0079-6700(02)00033-3 ↗
40. Spin‐casting was performed in a laminar flow box in ambient conditions with the following parameters: 1500 rev/18 s and 3000 rev/60 s.
41. 10.1002/1521-3927(20010501)22:8<624::AID-MARC624>3.0.CO;2-310.1002/1521-3927(20010501)22:8<624::AID-MARC624>3.0.CO;2-3 ↗
42. 10.1016/S0040-6090(02)00635-110.1016/S0040-6090(02)00635-1 ↗
43. Software packages: http:www.mdli.com/; http:www.accelrys.com(accessed January 2007).
44. 10.1021/ma020630g10.1021/ma020630g ↗
45. 10.1103/PhysRevB.39.1295810.1103/PhysRevB.39.12958 ↗
46. 10.1016/0379-6779(88)90216-010.1016/0379-6779(88)90216-0 ↗
47. 10.1021/ma00117a01610.1021/ma00117a016 ↗
48. 10.1103/PhysRevB.41.1067410.1103/PhysRevB.41.10674 ↗
49. 10.1016/0039-6028(69)90044-210.1016/0039-6028(69)90044-2 ↗
50. Gerlach R. · Surf. Sci. · 1996 · 485 · 352
51. J. R. Lakowicz Principles of Fluorescence Spectroscopy Kluwer Academic/Plenum New York1999.10.1007/978-1-4757-3061-6 ↗
52. Different image ranges were tested both by using FFT and PSD to cover a large range of lateral frequencies. Morever a highpass filter was applied to some images prior to FFT and PSD to enhance the sensitivity for eventual lateral regularities.
53. Differential scanning calorimetry measurements revealed the most viscous state of both polymers around 210 °C.
54. 10.1002/1521-4095(20020304)14:5<374::AID-ADMA374>3.0.CO;2-U10.1002/1521-4095(20020304)14:5<374::AID-ADMA374>3.0.CO;2-U ↗
55. The monolayer character of the main layer was confirmed by measurement on pinholes which show the same characteristics as the monolayer before thermal annealing.
56. See the Experimental.
57. Performed on film pinholes by means of section analysis together with phase images.
58. To provide comparability to the previously presented triblock‐copolymer film's the experimental parameters (solvents stirring and filtering conditions substrate and film preparation post‐treatment and storage conditions prior to the measurements) are kept identical.
59. 10.1063/1.142407110.1063/1.1424071 ↗
60. 10.1146/annurev.ms.26.080196.00244110.1146/annurev.ms.26.080196.002441 ↗
61. 10.1146/annurev.pc.41.100190.00252110.1146/annurev.pc.41.100190.002521 ↗
62. I. W. Hamley The Physics of Block Copolymers Oxford University Press1998.10.1093/oso/9780198502180.001.0001 ↗
63. E. Helfand Z. R. Wasserman inDevelopments in Block Copolymers (Ed. I. Goodman) Vol. 1 Applied Science London1982.
64. 10.1002/1521-4095(200108)13:16<1217::AID-ADMA1217>3.0.CO;2-D10.1002/1521-4095(200108)13:16<1217::AID-ADMA1217>3.0.CO;2-D ↗
65. 10.1002/(SICI)1521-4095(199802)10:3<195::AID-ADMA195>3.0.CO;2-V10.1002/(SICI)1521-4095(199802)10:3<195::AID-ADMA195>3.0.CO;2-V ↗
66. 10.1002/1521-4095(20020404)14:7<477::AID-ADMA477>3.0.CO;2-910.1002/1521-4095(20020404)14:7<477::AID-ADMA477>3.0.CO;2-9 ↗
67. 10.1021/la00002a00910.1021/la00002a009 ↗
68. 10.1021/ma00126a02910.1021/ma00126a029 ↗
69. 10.1021/ma00122a00410.1021/ma00122a004 ↗
70. 10.1021/ma00046a04310.1021/ma00046a043 ↗
71. 10.1021/ma00091a03610.1021/ma00091a036 ↗
72. 10.1016/S0022-3697(99)00102-X10.1016/S0022-3697(99)00102-X ↗
73. 10.1063/1.151264610.1063/1.1512646 ↗
74. 10.1002/1521-4095(20020404)14:7<477::AID-ADMA477>3.0.CO;2-910.1002/1521-4095(20020404)14:7<477::AID-ADMA477>3.0.CO;2-9 ↗