journal article·2024-07Open access

Integration of Mechatronic Functions on Additively Manufactured Components via Laser‐Assisted Selective Metal Deposition

Tobias Vieten, Sascha Weser, Alexander Schilling, Kerstin Gläser, André Zimmermann

Advanced Functional Materials· Volume 34· Issue 27

Abstract

Abstract The current industrial revolution derives much of its momentum from value creation based on interconnected products and related data based services. Such products must fulfill both mechanical and electrical requirements, making them mechatronic systems. The production of such systems via additive manufacturing (AM) processes offers advantages in achievable complexity, reduction of the amount of individual components, and cost‐effective as well as sustaina ble production of small quantities. In this work, a process chain is presented that allows for refining additively manufactured 3D structures made from industry‐standard materials into mechatronic components by creating electrically conductive structures directly on their surfaces. The process chain is based on masking the component's surface and selectively removing the masking according to the circuit geometry using laser radiation. In a wet–chemical bath process, the surface is then exposed to palladium nuclei, the masking is fully removed and metal layers (copper/nickel/gold) are deposited by electroless plating. The procedure is developed using stereolithography as a model process for AM and transferred to four additional AM methods. In all cases, despite markedly different surface properties, good selectivity of metal deposition is observed as well as adhesion strength and conductivity comparable to industrially common injection‐molded laser direct structured mechatronic interconnect devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty for Engineering Design Production Engineering and Automotive Engineering Institute for Micro Integration (IFM) University of Stuttgart Allmandring 9b 70569 Stuttgart Germany

Hahn‐Schickard Allmandring 9 b 70569 Stuttgart Germany

Funding

AiF Projekt

References (48)

Show source-provided references
1. 10.1007/s00170-017-1221-110.1007/s00170-017-1221-1 ↗
2. Calvert P. D. · 1999 · 128
3. Franke J. · 2013
4. 10.1038/s41598-023-29261-010.1038/s41598-023-29261-0 ↗
5. 10.1016/j.cirp.2008.09.00610.1016/j.cirp.2008.09.006 ↗
6. 10.1063/1.164490710.1063/1.1644907 ↗
7. 10.1088/0957-4484/18/34/34520210.1088/0957-4484/18/34/345202 ↗
8. 10.1143/JJAP.49.05EC0310.1143/JJAP.49.05EC03 ↗
9. 10.1002/adma.20110071710.1002/adma.201100717 ↗
10. 10.1002/adma.20190552710.1002/adma.201905527 ↗
11. 10.1002/admt.20160022210.1002/admt.201600222 ↗
12. 10.1002/aelm.20160027710.1002/aelm.201600277 ↗
13. 10.1021/jp205281a10.1021/jp205281a ↗
14. 10.1039/C4TA07120D10.1039/C4TA07120D ↗
15. 10.1016/j.tca.2012.03.00410.1016/j.tca.2012.03.004 ↗
16. 10.1002/adfm.20180689510.1002/adfm.201806895 ↗
17. 10.1039/c3nr34346d10.1039/c3nr34346d ↗
18. 10.1186/1556-276X-8-48910.1186/1556-276X-8-489 ↗
19. W.John inProceedings of 9th Int. Congress Molded Interconnect Devices MID 2010 Fuerth Künzelsau Germany2010.
20. Goth C. · 2019
21. Müller H. · 2018
22. T.Mager C.Jürgenhake R.Dumitrescu In 13th Int. Congress Molded Interconnect Devices (MID) IEEE Piscataway NJ2018 pp.1.10.1109/ICMID.2018.8527014 ↗
23. Klein S. · 2020
24. 10.1002/adfm.20170445110.1002/adfm.201704451 ↗
25. 10.1007/s00170-010-3051-210.1007/s00170-010-3051-2 ↗
26. T.Kordass PhD Thesis FAU University Press Erlangen 2021.
27. 10.1021/acsaelm.1c0119310.1021/acsaelm.1c01193 ↗
28. S.Weser B.Freisinger Werkzeuglose Fertigung von funktionalisierten 3D‐Kunststoffbauteilen durch die Kombination von generativen Verfahren und laserbasierter selektiver Metallisierung (LasMet3D)Hahn‐Schickard‐Gesellschaft für angewandte Forschung e.V. https://www.hahn‐schickard.de/projekt‐detail/lasmet3d November 2020.
29. 10.1016/j.rinp.2020.10294310.1016/j.rinp.2020.102943 ↗
30. P.Ninz PhD Thesis University of Stuttgart Shaker Verlag Düren 2021.
31. E.Hirt K.Ruzicka in 2018 7th Electronic System‐Integration Technology Conf. (ESTC) IEEE Piscataway NJ2018 p.1.10.1109/ESTC.2018.8546449 ↗
32. Goth C. · 2014 · 115
33. AiF IGF project report · 2015
34. P.Amend C.Goth J.Franke T.Frick M.Schmidt inProc. of the 10th Int. Congress Molded Interconnect Devices 3D‐MID e.V. Fuerth Germany2012.
35. 10.1016/j.addma.2018.08.01610.1016/j.addma.2018.08.016 ↗
36. Suchentrunk R. · 2000
37. N.Kanani Kupferschichten Leuze Verlag Bad Saulgau2000.
38. 2016
39. 2016
40. 10.1016/j.engfailanal.2017.05.03810.1016/j.engfailanal.2017.05.038 ↗
41. 10.1007/BF0321506610.1007/BF03215066 ↗
42. 10.1007/978-3-642-45427-1_810.1007/978-3-642-45427-1_8 ↗
43. Eberhardt W. · Elektronik Sonderausgabe Räumliche elektronische Baugruppen · 2011 · 24
44. 2013
45. 2008
46. 2017
47. J.Friedrich PhD Thesis Friedrich‐Alexander‐Univerisity Fürth 2006.
48. 10.1088/1361-6439/abf84310.1088/1361-6439/abf843 ↗