Dipole‐Engineered Conductive Additives for Ultrastable Interphase Evolution in High‐Areal‐Capacity Silicon Anodes
Source abstract
Abstract
ABSTRACT Ensuring electrical integrity and interfacial stability in silicon (Si) anodes critically relies on conductive carbon additives; however, their potential role in modulating interphase evolution has rarely been systematically considered, and the mechanistic interplay between additive functionality and electrolyte chemistry remains insufficiently understood, thereby limiting the realization of high‐areal‐capacity operation. Here, a dipole‐engineered molecular design of an ionically/electronically conductive sulfonated carbon nanofiber (SC) additive is introduced, which establishes sulfonyl dipole‐mediated interfacial domains that preferentially direct fluoroethylene carbonate reduction toward the formation of a compact and LiF‐rich interphase. Incorporation of sulfonic acid functionalities enables robust hydrogen bonding with Si, promoting a spatially homogeneous electrode architecture with intimate interfacial contact and efficient charge percolation pathways that accelerate lithiation/delithiation dynamics. As a result, the Si–SC anode achieves an ultrahigh‐areal‐capacity of 10.2 mAh cm −2 and delivers 1784 mAh g −1 at a high current density of 10 A g −1 , while maintaining 94.2% capacity over 300 cycles at 1 A g −1 . Full‐cell evaluation with Ni‐rich layered cathodes further demonstrates stable capacity retention, underscoring practical applicability. This work introduces dipole‐directed conductive additive engineering as a new guiding paradigm that redefines them as chemically active interphase regulators for scalable, high‐energy‐density Si‐based next‐generation lithium‐ion batteries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering Pohang University of Science and Technology (POSTECH) Pohang‐si Gyeongsangbuk‐do Republic of Korea
Department of Battery Engineering Graduate Institute of Ferrous & Eco Materials Technology (GIFT) Pohang University of Science and Technology (POSTECH) Pohang‐si Gyeongsangbuk‐do Republic of Korea
References (100+)
Show source-provided references
1. 30 Years of Lithium‐Ion Batteries10.1002/adma.201800561 ↗
2. Guidelines and Trends for Next‐Generation Rechargeable Lithium and Lithium‐Ion Batteries10.1039/C7CS00863E ↗
3. Issues and Challenges Facing Rechargeable Lithium Batteries10.1038/35104644 ↗
4. Magneto‐Conversion Anode Design for Unlocking High Energy Density and Dendrite‐Free Hybrid Lithium–Ion/Lithium–Metal Batteries10.1039/D5EE02644J ↗
5. Promise and Reality of Post‐Lithium‐Ion Batteries with High Energy Densities
6. Lamellar Sulfonated Acid Polymer‐Initiated In Situ Construction of Robust LiF‐Rich SEI Enabling Superior Charge Transport for Ultrastable and Fast Charging Silicon Anodes10.1016/j.jechem.2024.06.025 ↗
7. Confronting Issues of the Practical Implementation of Si Anode in High‐Energy Lithium‐Ion batteries10.1016/j.joule.2017.07.006 ↗
8. High‐Performance Lithium Battery Anodes Using Silicon Nanowires10.1038/nnano.2007.411 ↗
9. Failure Mechanisms of Single‐Crystal Silicon Electrodes in Lithium‐Ion Batteries10.1038/ncomms11886 ↗
10. Nanostructured Silicon for High Capacity Lithium Battery Anodes10.1039/C0EE00281J ↗
11. Designing Nanostructured Si Anodes for High Energy Lithium Ion Batteries10.1016/j.nantod.2012.08.004 ↗
12. 25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium‐Ion Batteries10.1002/adma.201301795 ↗
13. Calendar Aging of Silicon‐Containing Batteries10.1038/s41560-021-00883-w ↗
14. Situ Measurement of Solid Electrolyte Interphase Evolution on Silicon Anodes Using Atomic Force Microscopy10.1002/aenm.201600099 ↗
15. Progressive Growth of the Solid–Electrolyte Interphase Towards the Si Anode Interior Causes Capacity Fading10.1038/s41565-021-00947-8 ↗
16. Polar Polymer‐Solvent Interaction Derived Favorable Interphase for Stable Lithium Metal Batteries10.1039/C9EE02558H ↗
17. Interfacial‐Catalysis‐Enabled Layered and Inorganic‐Rich SEI on Hard Carbon Anodes in Ester Electrolytes for Sodium‐Ion Batteries10.1002/adma.202300002 ↗
18. How Can the Electrode Influence the Formation of the Solid Electrolyte Interface?10.1021/acsenergylett.1c01359 ↗
19. Electrolyte Design for LiF‐Rich Solid–Electrolyte Interfaces to Enable High‐Performance Microsized Alloy Anodes for Batteries10.1038/s41560-020-0601-1 ↗
20. Asymmetric Electrolyte Design for High‐Energy Lithium‐Ion Batteries with Micro‐Sized Alloying Anodes10.1038/s41560-024-01619-2 ↗
21. Localized High‐Concentration Electrolytes Get More Localized through Micelle‐Like Structures10.1038/s41563-023-01700-3 ↗
22. Designing Better Electrolytes10.1126/science.abq3750 ↗
23. Ionically Conductive Self‐Healing Binder for Low Cost Si Microparticles Anodes in Li‐Ion Batteries10.1002/aenm.201703138 ↗
24. Binder‐Enabled Cross‐Scale Stabilization of High‐Areal‐Capacity Micro‐Sized Silicon Anodes for High‐Voltage Lithium‐Ion Batteries10.1016/j.ensm.2025.104029 ↗
25. Regulating Anode‐Electrolyte Interphasial Reactions by Zwitterionic Binder Chemistry in Lithium‐Ion Batteries with High‐Nickel Layered Oxide Cathodes and Silicon‐Graphite Anodes
26. Catalysis‐Induced Highly‐Stable Interface on Porous Silicon for High‐Rate Lithium‐Ion Batteries10.1007/s40820-025-01701-8 ↗
27. Transgenic Engineering on Silicon Surfaces Enables Robust Interface Chemistry10.1021/acsenergylett.2c01202 ↗
28. Regulating the Inner Helmholtz Plane for Stable Solid Electrolyte Interphase on Lithium Metal Anodes10.1021/jacs.9b05029 ↗
29. Specific Adsorption‐Oxidation Strategy in Cathode Inner Helmholtz Plane Enabling 4.6 V Practical Lithium‐Ion Full Cells10.1021/acs.nanolett.3c01700 ↗
30. Multiscale Carbon‐Integrated Silicon Anode for Stable Cycling under Practical Lithium‐Ion Battery Conditions
31. A High Tap Density Secondary Silicon Particle Anode Fabricated by Scalable Mechanical Pressing for Lithium‐Ion Batteries10.1039/C5EE01363A ↗
32. Application of High‐Strength, High‐Density, Isotropic Si/C Composites in Commercial Lithium‐Ion Batteries10.1016/j.ensm.2023.102857 ↗
33. A Rapid, Scalable Laser‐Scribing Process to Prepare Si/Graphene Composites for Lithium‐Ion Batteries10.1002/smll.202305921 ↗
34. Stable Cycling of Double‐Walled Silicon Nanotube Battery Anodes through Solid–Electrolyte Interphase Control10.1038/nnano.2012.35 ↗
35. Silicon Carbide‐Free Graphene Growth on Silicon for Lithium‐Ion Battery with High Volumetric Energy Density10.1038/ncomms8393 ↗
36. Growth of Conformal Graphene Cages on Micrometre‐Sized Silicon Particles as Stable Battery Anodes
37. A Pomegranate‐Inspired Nanoscale Design for Large‐Volume‐Change Lithium Battery Anodes10.1038/nnano.2014.6 ↗
38. Supercritical CO2‐Assisted SiOx/Carbon Multi‐Layer Coating on Si Anode for Lithium‐Ion Batteries10.1002/adfm.202104135 ↗
39. Silicon Anode with High Initial Coulombic Efficiency by Modulated Trifunctional Binder for High‐Areal‐Capacity Lithium‐Ion Batteries10.1002/aenm.201903110 ↗
40. Spatially Uniform Lithiation Enabled by Single‐Walled Carbon Nanotubes10.1021/acsenergylett.3c01060 ↗
41. The Mitigation of Pitch‐Derived Carbon with Different Structures on the Volume Expansion of Silicon in Si/C Composite Anode10.1016/j.jechem.2023.04.004 ↗
42. Interfacially Induced Cascading Failure in Graphite‐Silicon Composite Anodes10.1002/advs.201801007 ↗
43. Structural Design and Challenges of Micron‐Scale Silicon‐Based Lithium‐Ion Batteries10.1002/advs.202407540 ↗
44. Scalable Synthesis of Ant‐Nest‐Like Bulk Porous Silicon for High‐Performance Lithium‐Ion Battery Anodes10.1038/s41467-019-09510-5 ↗
45. Surface and Interface Engineering of Silicon‐Based Anode Materials for Lithium‐Ion Batteries10.1002/aenm.201701083 ↗
46. Mechanical Properties of Vapor Grown Carbon Nanofibers10.1016/j.carbon.2009.09.011 ↗
47. Electrospun Carbon Nanofibers and Their Applications in Several Areas10.1021/acsomega.3c01114 ↗
48. Recent Progress in Utilizing Carbon Nanotubes and Graphene to Relieve Volume Expansion and Increase Electrical Conductivity of Si‐Based Composite Anodes for Lithium‐Ion Batteries10.1016/j.carbon.2024.118800 ↗
49. What Is the Real Origin of Single‐Walled Carbon Nanotubes for the Performance Enhancement of Si‐Based Anodes?10.1021/jacs.4c01677 ↗
50. Ionically Conductive Elastic Polymer Binder for Ultrahigh Loading Electrode in High‐Energy‐Density Lithium Batteries10.1002/adma.202506266 ↗
51. A Charge Confinement Strategy for Boosting Interfacial Space Charge Storage in Manganese Ferrites Enabled by Highly Polarized Fluorinated‐Interfacial Layer for High‐Energy‐Density and Ultrafast Rechargeable Lithium‐Ion Batteries10.1002/adfm.202408986 ↗
52. Oxidation of Alkenes to 1, 2‐Diols: FT‐IR and UV Studies of Silica‐Supported Sulfonic Acid Catalysts and Their Interaction with H2O and H2O210.1016/j.jcat.2012.06.014 ↗
53. Three‐Dimensional Network of Nitrogen‐Doped Carbon Matrix‐Encapsulated Si Nanoparticles/Carbon Nanofibers Hybrids for Lithium‐Ion Battery Anodes with Excellent Capability10.1038/s41598-022-20026-9 ↗
54. Simultaneous Tuning of Methanol Crossover and Ionic Conductivity of SPEEK Membrane Electrolyte by Incorporation of PSSA Functionalized MWCNTs: A Comparative Study in DMFCs10.1016/j.cej.2014.01.030 ↗
55. The Surface Analytical Characterization of Carbon Fibers Functionalized by H2SO4/HNO3 Treatment10.1016/j.carbon.2007.11.002 ↗
56. A Facile Approach Toward Preparation of Sulfonated Multi‐Walled Carbon Nanotubes and Their Dispersibility in Various Solvents10.1016/j.colsurfa.2015.07.005 ↗
57. Synthesis and Characterization of Sulfonated Single‐Walled Carbon Nanotubes and Their Performance as Solid Acid Catalyst10.1016/j.jssc.2007.12.017 ↗
58. Pyridinic N‐Dominated Hard Carbon with Accessible Carbonyl Groups Enabling 98% Initial Coulombic Efficiency for Sodium‐Ion Batteries10.1002/adfm.202403144 ↗
59. Silicon in Hollow Carbon Nanospheres Assembled Microspheres Cross‐Linked with N‐Doped Carbon Fibers toward a Binder Free, High Performance, and Flexible Anode for Lithium‐Ion Batteries10.1002/adfm.202101487 ↗
60. OH‐Induced Surface Reconstitution in Single Atoms and Clusters Integrated Electrocatalysts for Self‐Adaptive Oxygen Electrocatalysis10.1002/adfm.202410700 ↗
61. Tailoring a Multilayer Fine‐Grained Solid Electrolyte Interphase by Pulse Electrochemical Activation Maneuver for Stable Si/C Anodes10.1039/D5EE02060C ↗
62. Metallurgical Refractory Lining‐Guided Inorganic Binder for Stable Lithium Storage in Silicon Microparticle Anodes10.1039/D5EE03194J ↗
63. Electrolyte Chemistry Modulation toward High‐Performance and Ultralow‐Temperature Silicon Anode10.1002/adma.202417981 ↗
64. Hydrolysis‐Engineered Robust Porous Micron Silicon Anode for High‐Energy Lithium‐Ion Batteries10.1007/s40820-025-01808-y ↗
65. An Additive‐Assisted Hydrolysis‐Blocking Route Enables Thermally Stable Interfacial Chemistry of Silicon‐Based Anode Materials in a Rechargeable Lithium Battery10.1002/aenm.202501637 ↗
66. Beyond Mechanics: Inherently HF‐Phobic Si with Minimized Corrosion for Stable Li Storage10.1002/aenm.202501679 ↗
67. Bio‐Inspired Toughening Elastomer as an Innovative Self‐Healing Binder for Si‐Based Electrode10.1002/aenm.202501991 ↗
68. Molecular Engineering of Coacervate Network Binders for Stable Silicon‐Based Anodes in Lithium‐Ion Batteries
69. In Situ Reconstruction and Anion Blocking Interphase Strategy for High‐Performance Silicon‐Based Anodes in Liquid and Solid‐State Batteries10.1002/adfm.202424137 ↗
70. Inner Helmholtz Plane Constructing LiF‐Rich Solid Electrolyte Interphase of Silicon Anodes10.1016/j.nanoen.2025.110951 ↗
71. Edge‐Surface‐Inter Carbon Nanoarchitecture on Silicon10.1021/acsnano.5c00371 ↗
72. Stabilizing the Bulk‐Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient‐Hierarchically Ordered Conductive Networks10.1002/adma.202404360 ↗
73. Interface Engineering of Si‐Based Anodes with Fluorinated Binder Enabling Lean‐Additive Lithium‐Ion Batteries10.1016/j.ensm.2024.103176 ↗
74. Promoting Homogeneous Lithiation of Silicon Anodes Via the Application of Bifunctional PEDOT:PSS/PEG Composite Binders10.1016/j.ensm.2023.103074 ↗
75. “Faraday Cage” Induced Anion‐Confined Interface Enables Industrially Compatible Microsized Silicon Anodes10.1021/acsenergylett.4c01517 ↗
76. Physicochemical Dual Cross‐Linking Conductive Polymeric Networks Combining High Strength and High Toughness Enable Stable Operation of Silicon Microparticle Anodes10.1002/adma.202301320 ↗
77. Tailoring Chemical Composition of Solid Electrolyte Interphase by Selective Dissolution for Long‐Life Micron‐Sized Silicon Anode10.1038/s41467-023-43093-6 ↗
78. Integrating SEI into Layered Conductive Polymer Coatings for Ultrastable Silicon Anodes10.1002/adma.202203617 ↗
79. Host–Guest Interlocked Complex Binder for Silicon–Graphite Composite Electrodes in Lithium Ion Batteries10.1002/aenm.202103718 ↗
80. An Ion‐Conductive Grafted Polymeric Binder with Practical Loading for Silicon Anode with High Interfacial Stability in Lithium‐Ion Batteries10.1002/aenm.202201197 ↗
81. Accelerated Conversion of Polysulfides for Ultra Long‐Cycle of Li‐S Battery at High‐Rate over Cooperative Cathode Electrocatalyst of Ni0.261Co0.739S2/N‐Doped CNTs10.1002/advs.202402389 ↗
82. Exceeding Theoretical Capacity in Exfoliated Ultrathin Manganese Ferrite Nanosheets Via Galvanic Replacement‐Derived Self‐Hybridization for Fast Rechargeable Lithium‐Ion Batteries10.1002/adfm.202300143 ↗
83. Conversion of Photovoltaic Waste Silicon into Amorphous Silicon Nanowire Anodes10.1039/D5EE00020C ↗
84. Self‐Pressure Silicon–Carbon Anodes for Low‐External‐Pressure Solid‐State Li‐Ion Batteries10.1021/acsnano.5c03017 ↗
85. A Stress‐Buffering Hierarchically Porous Silicon/Carbon Composite for High‐Energy Lithium‐Ion Batteries10.1002/adfm.202505207 ↗
86. Subnano‐Sized Silicon Anode Via Crystal Growth Inhibition Mechanism and Its Application in a Prototype Battery Pack10.1038/s41560-021-00945-z ↗
87. A Micrometer‐Sized Silicon/Carbon Composite Anode Synthesized by Impregnation of Petroleum Pitch in Nanoporous Silicon10.1002/adma.202103095 ↗
88. Solid Electrolyte Interphase Growth and Capacity Loss in Silicon Electrodes10.1021/jacs.6b02882 ↗
89. Overcoming Chemical and Mechanical Instabilities in Lithium Metal Anodes with Sustainable and Eco‐Friendly Artificial SEI Layer10.1002/adma.202407381 ↗
90. Artificial LiF‐Rich Interface Enabled by in Situ Electrochemical Fluorination for Stable Lithium‐Metal Batteries10.1002/anie.202319600 ↗
91. Self‐Assembled Monolayers Direct a LiF‐Rich Interphase toward Long‐Life Lithium Metal Batteries10.1126/science.abn1818 ↗
92. Lithium Ion Diffusion Mechanism on the Inorganic Components of the Solid–Electrolyte Interphase10.1039/D0TA11444H ↗
93. Borate–Pyran Lean Electrolyte‐Based Li‐Metal Batteries with Minimal Li Corrosion10.1038/s41560-023-01405-6 ↗
94. Hierarchical Sulfide‐Rich Modification Layer on SiO/C Anode for Low‐Temperature Li‐Ion Batteries10.1002/advs.202104531 ↗
95. Shrinking of C–S Bonds of Organosulfonic Acids in Superacidic Media—Investigation of the Protonation of Methanesulfonic Acid and Benzenesulfonic Acid and Their Limits10.1039/D5DT00864F ↗
96. Polar Interaction of Polymer Host–Solvent Enables Stable Solid Electrolyte Interphase in Composite Lithium Metal Anodes10.1016/j.jechem.2021.04.045 ↗
97. Quantitative Investigation of the Decomposition of Organic Lithium Ion Battery Electrolytes with LC‐MS/MS10.1039/C7RA03839A ↗
98. Quantitative and Qualitative Determination of Polysulfide Species in the Electrolyte of a Lithium‐Sulfur Battery Using HPLC ESI/MS with One‐Step Derivatization10.1002/aenm.201401888 ↗
99. Separation and Quantification of Organic Electrolyte Components in Lithium‐Ion Batteries Via a Developed HPLC Method10.1149/2.0401504jes ↗
100. Uniform Lithium Ion Flux and Robust Interphase Enabled by Anion Anchoring Additive for High Energy Density Si‐Based Anodes10.1039/D6TA01386D ↗