journal article·2025-02-03

Reversibly Switchable Topography Enabled by Melting and Crystallization of Melt-Electrowritten Polymer Fibers

Ilia Sadilov, Gissela Constante, Martin Dulle, Dennis Schönfeld, Thorsten Pretsch, Leonid Ionov

ACS Materials Letters· Volume 7· Issue 2
Publisher page

Abstract

We report the fabrication of topographically structured surfaces with reversibly switchable topography by using melt electrowriting (MEW). In particular, MEW was used to produce continuous high aspect ratio lamellae of semicrystalline polyester urethane with a poly(1,10-decylene adipate) soft segment. The switching of topography is achieved by the expansion and contraction of the polymer caused by the melting and crystallization of the soft segment that results in the buckling of lamellae. In the molten stage, lamellae can be buckled in a certain direction by capillary forces caused by water droplets between two lamellae. In addition, the interlamellar distance between neighbors’ lamellae can be managed by water droplets. Finally, we have demonstrated the possibility of creating electrically conductive surfaces with switchable conductivity achieved by the reversible buckling of the lamellae.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Materials and Mechanics · Advanced Sensor and Energy Harvesting Materials · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering Science, University of Bayreuth, Ludwig Thoma Str, 36A, Bayreuth 95447, Germany

Jülich Centre for Neutron Science, Forschungszentrum Jülich

Wilhelm-Johnen-Straße

Shape Memory Polymers Group, Synthesis and Polymer Technology, Fraunhofer Institute for Applied Polymer Research IAP, Geiselbergstr. 69, Potsdam 14476, Germany

Bavarian Polymer Institute

University of Bayreuth

Funding

European Regional Development Fund · Deutsche Forschungsgemeinschaft · Fraunhofer-Gesellschaft

References (30)

Show source-provided references
1. 10.1016/j.cis.2021.10258410.1016/j.cis.2021.102584 ↗
2. 10.1007/s10853-020-05116-110.1007/s10853-020-05116-1 ↗
3. 10.34133/2022/987307510.34133/2022/9873075 ↗
4. 10.1002/sstr.20220028410.1002/sstr.202200284 ↗
5. 10.1021/acsnano.1c1138810.1021/acsnano.1c11388 ↗
6. 10.3390/nano1310168810.3390/nano13101688 ↗
7. 10.1016/j.solmat.2024.11273110.1016/j.solmat.2024.112731 ↗
8. 10.1016/j.apenergy.2021.11739410.1016/j.apenergy.2021.117394 ↗
9. 10.1016/j.seppur.2019.11569410.1016/j.seppur.2019.115694 ↗
10. 10.1002/mma.846210.1002/mma.8462 ↗
11. 10.1021/acs.chemrev.1c0045310.1021/acs.chemrev.1c00453 ↗
12. 10.1039/d1ra04434f10.1039/d1ra04434f ↗
13. 10.1021/acs.chemmater.8b0000810.1021/acs.chemmater.8b00008 ↗
14. 10.1002/cjoc.20230018510.1002/cjoc.202300185 ↗
15. 10.1002/1521-3773(20020617)41:12<2034::Aid-Anie2034>3.0.Co;2-M10.1002/1521-3773(20020617)41:12<2034::Aid-Anie2034>3.0.Co;2-M ↗
16. 10.1016/j.cej.2019.12298910.1016/j.cej.2019.122989 ↗
17. 10.1021/acs.macromol.1c0156210.1021/acs.macromol.1c01562 ↗
18. 10.1038/srep2476110.1038/srep24761 ↗
19. 10.1039/c3ta13414h10.1039/c3ta13414h ↗
20. 10.1002/mame.20220021410.1002/mame.202200214 ↗
21. 10.1002/mame.20210061910.1002/mame.202100619 ↗
22. 10.3390/molecules2603052210.3390/molecules26030522 ↗
23. 10.1021/acsami.5b0268810.1021/acsami.5b02688 ↗
24. 10.1021/am501970d10.1021/am501970d ↗
25. 10.1021/acsami.2c0107810.1021/acsami.2c01078 ↗
26. 10.1002/sstr.20230004010.1002/sstr.202300040 ↗
27. 10.1021/acsami.0c1860810.1021/acsami.0c18608 ↗
28. 10.1007/978-3-540-36352-110.1007/978-3-540-36352-1 ↗
29. 10.1016/C2009-0-25539-510.1016/C2009-0-25539-5 ↗
30. 10.1016/j.jmps.2019.01.01910.1016/j.jmps.2019.01.019 ↗