Crosslinked Bicontinuous Cubic Lyotropic Liquid‐Crystal/Butyl‐Rubber Composites: Highly Selective, Breathable Barrier Materials for Chemical Agent Protection
Source abstract
Abstract
A breathable material that can act as a barrier to chemical agents is presented. The material is composed of butyl rubber and a crosslinkable lyotropic liquid crystal. Under the right synthesis conditions, a cubic phase with the desired selectivity properties results (see figure). The material is highly permeable to water vapor, but strongly impermeable to a mustard gas simulant. Application of the material for effective personal protection against such chemical agents is envisaged.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Polymer Synthesis and Characterization · Synthesis and properties of polymers · Liquid Crystal Research Advancements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. N. J. Abbott inCoatings Technology Handbook 2nd ed. (Eds: D. Satas A. A. Tracton) Marcel Dekker New York2001 819–823.
2. E. Kresge H.‐C. Wang inKirk–Othmer Encyclopedia of Chemical Technology 4th ed. Vol. 8 Wiley New York1993 934–955.
3. H. Nagano Exxon Butyl Rubber Compounding and Applications Exxon Chemical Japan Polymers Technical Center Yokohama Japan2001.
4. Strategies to Protect the Health of Deployed U. S. Forces: Force Protection and Decontamination (Eds: M. A. Wartell M. T. Kleinman B. H. Huey L. M. Duffy) National Academy Press Washington DC1999 Ch. 4 67–107.
5. The U. S. Dept. of Defense currently uses protective garments made with 3 layers of open‐cell polyurethane loaded with activated carbon but these garments are bulky and heavy and lighter membranes are considered a high priority. The currently used gloves over‐boots and mask components are made with BR because these areas require greater protection.
6. 10.1557/mrs2003.16810.1557/mrs2003.168 ↗
7. 10.1021/cm040342u10.1021/cm040342u ↗
8. B. J.Elliott US Patent 7 090 788 2006.10.1088/1126-6708/2006/01/090 ↗
9. Yang Y. C. · Chem. Ind. · 1995 · 9 · 334
10. 10.1002/adma.20050044410.1002/adma.200500444 ↗
11. 10.1007/BF0149025110.1007/BF01490251 ↗
12. 10.1016/0022-2836(88)90607-910.1016/0022-2836(88)90607-9 ↗
13. 10.1021/ja020810610.1021/ja0208106 ↗
14. 10.1021/ja00125a01910.1021/ja00125a019 ↗
15. 10.1021/la970897m10.1021/la970897m ↗
16. 10.1021/ja026085g10.1021/ja026085g ↗
17. 10.1016/0370-1573(80)90041-110.1016/0370-1573(80)90041-1 ↗
18. The entire2/BR/H2O phase diagram at 70 °C was not determined at this time. Only the Q‐phase region of interest and the phases immediately bordering it were elucidated.
19. Depending on the amount of LLC monomer BR and H2O added the resulting LLC blend can either be homogeneous or contain phase‐separated LLC and BR domains. This phenomenon has been observed previously in the1/BR/H2O system [7].
20. The characteristic strong C–H wagging band of the terminal CH2CH– unit of ω‐alkyl‐1 3‐diene units is found at 1004 cm–1 based ontrans‐1 3‐pentadiene as a model compound. This diene IR band decreases with increasing amounts of 1 4‐ or 1 2‐polymerization.
21. The absolute CEES vapor flux through the LLC‐BR membranes can be lowered even more by using thicker films and/or by more heavily cross‐linking the BR domains via vulcanization or electron‐beam curing [7].
22. According to gravimetric analysis the LLC‐BR membranes exposed to low relative humidity (10 % or dynamic vacuum) lost a small amount of water compared to the original membranes whereas those exposed to high relative humidity (71 %) gained a small amount of water. However it was not possible to completely dehydrate the2‐BR membranes (or disrupt the Q‐phase structure) even after exposure to dynamic vacuum for 24 h at ambient temperature. See the Supporting Information for complete details.