Source abstract
Abstract
Abstract The detection of ultratrace analytes is highly desirable for the non‐invasive monitoring of human diseases. However, a major challenge is fast, naked‐eye, high‐resolution ultratrace detection. Herein, a rectangular 3D composite photonic crystal (PC)‐based optoelectronic device is first designed that combines the sensitivity‐enhancing effects of PCs and optoelectronic devices with fast and real‐time digital monitoring. A crack‐free, centimeter‐scale, mechanically robust ellipsoidal composite PCs with sufficient hardness and modulus, even exceeding most plastics and aluminum alloys, are developed. The high mechanical strength of ellipsoidal composite PCs allows them to be hand‐machined into rectangular geometries that can be conformally covered with the centimeter‐scale flat light‐detection area without interference from ambient light, easily integrating 3D composite PC‐based optoelectronic devices. The PC‐based device's signal‐to‐noise ratio increases dramatically from original 30–40 to ≈60–70 dB. Droplets of ultratrace analytes on the device are identified by fast digital readout within seconds, with detection limits down to 5 µL, enabling rapid identification of ultratrace glucose in artificial sweat and diabetes risk. The developed 3D PC‐based sensor offers the advantages of small size, low cost, and high reliability, paving the way for wider implementation in other portable optoelectronic devices.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Photonic Crystals and Applications · Advanced Fluorescence Microscopy Techniques · Photonic and Optical Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Biomedical Engineering City University of Hong Kong Hong Kong 999077 P. R. China
Department of Mechanical Engineering The University of Hong Kong Hong Kong 999077 P. R. China
Department of Electrical and Electronic Engineering The University of Hong Kong Hong Kong 999077 P. R. China
Center for Advanced Materials (CAM) Heidelberg University 69120 Heidelberg Germany
Department of Electrical and Computer Engineering New Jersey Institute of Technology Newark NJ 07102 USA
Funding
City University of Hong Kong · National Natural Science Foundation of China
References (36)
Show source-provided references