Optoelectronic strain measurement for flywheels
Source abstract
Abstract
Conceptual improvements to a non-contact optical strain measurement technique for high-speed flywheels are presented. The improvements include a novel reflective pattern that allows for greater displacement sensitivity, the ability to measure rigid body vibrations and separate the associated vibration-induced displacement from the strain-induced displacement, and the ability to compensate for potential sensor drift during flywheel operation. The effects of rigid body rotor vibrations and sensor drift have been modeled and techniques to compensate for the errors associated with such effects are presented. Experimental results validate the ability of the technique to separate such vibrations from axisymmetric flexible body displacements, and to compensate for errors due to in-plane and out-of-plane pattern misalignment and sensor drift. Displacement measurements made on an aluminum rotor operating at a maximum speed of 16 krpm (255 m/s at the point of measurement) were made with ±1 μm accuracy. At this speed, hoop strains were found to be within 40–125 με of theoretical predictions, provided a proper accounting is made for thermal strains. Relative to the theoretical hoop strains, the measured hoop strains differed by 5.0 to 6.4% at 16 krpm.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced Sensor Technologies Research · Sensor Technology and Measurement Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Simpson, M.L. andWelch, D.E., “Optoelectronic Strain Measurement System for Rotating Disks,” EXPERIMENTAL MECHANICS,27 (1),37–43 (1987).10.1007/BF02318861 ↗
2. Preater, R., “Non-Contact Method of In-Plane Strain Measurement on Rotating Structures,”Proc. Society of Photo-Optical Instrumentation Engineers 1980 European Conference on Optical Systems and Applications,236,58–61 (1980).10.1117/12.958985 ↗
3. Preater, R. andSwain, R., “Preliminary Assessment of the Requirements to Transfer In-Plane ESPI to an Industrial Spinning Pit Facility,”Proc. SPIE—The International Society for Optical Engineering Interferometry VI: Applications, July 14–15, 1993, San Diego, CA,2004,142–149 (1993).
4. Ferrero, C., Genta, G., andMarinari, C., “Experimental Strain Measurements on Bare Filament Flywheels,”Composites,14 (4),359–364 (1983).10.1016/0010-4361(83)90155-6 ↗
5. Ferrero, C., Genta, G., Marinari, C., andRonco, C., “Experimental Study of the Stress Distribution in the Spokes of Bare Filament Flywheels,”Composites,16 (4),286–292 (1985).10.1016/0010-4361(85)90281-2 ↗
6. Morganthaler, G. F. and Bonk, S. P., “Composite Flywheel Stress Analysis and Material Study,” Proc. 12th Natl. SAMPE Symp., Soc. for Advancement of Materials and Process Engrg., Covina, CA, paper no. D5 (1967).
7. Hoeltzel, D.A., Stark, R., and Ali, S., “Voltage to Frequency Conversion for Telemetric Strain Measurements in Rotating Mechanical Systems” Experimental Techniques, 18–24, July/August (1993).10.1111/j.1747-1567.1993.tb00758.x ↗
8. Saito, Y., Kato, H., andYoshikawa, K., “Strain Analysis of a Rotating Plate with X-Ray Diffraction Techniques,” EXPERIMENTAL MECHANICS,33 (1)21–24 (1993).10.1007/BF02322545 ↗
9. Gabrys, C.W. andBakis, C.E., “Design and Manufacturing of Filament Wound Elastomeric Matrix Composite Flywheels,”J. Reinforced Plastics and Composites,16 (6),488–502 (1997).10.1177/073168449701600601 ↗
10. Ehrich, F., Handbook of Rotordynamics, Krieger Publishing Co., Malabar, FL, 3.55–3.57 (1999).
11. Timoshenko, S.P., Theory of Elasticity, 3rd Edition, McGraw Hill Book Co., New York, 81–82 (1934).
12. Emerson, R.P., “Viscoelastic Behavior of Composite Flywheel Rotors,” Ph.d. dissertation (in progress), Dept. of Engineering Science and Mechanics, The Pennsylvania State University (2002).