journal article·2011-06

Influence of Storage Duration on Retention of Original Fracture Toughness

N. W. Smith, S. Ekwaro-Osire, M. Khandaker, J. Hashemi

Experimental Mechanics· Volume 51· Issue 5
Publisher page

Abstract

Accurate knowledge of bone properties is central in the prediction of failure and the development of injury treatment protocols. Often when bone properties are measured experimentally, bone specimens have to be chemically preserved prior to or during testing. Understanding the effect of the bone preservation method on the material properties is important. Degradation of properties due to preservation methods may lead to incorrect reporting of values of the bone properties. A salient question is, therefore, whether the preservation of bovine cortical bone in ethanol for extended periods of time affects fracture toughness; and if so, whether that affect is reversible. To answer these questions, a three-point bending test set-up was constructed to perform experiments over a period of 9 weeks. A total of 109 specimens of cortical bone of the same orientation were manufactured from the mid-diaphysis of the femur. These specimens were separated into three groups based on location in the femur; namely, medial, lateral, and posterior. The specimens were preserved in ethanol. At the end of each week, a sample of specimens was selected for testing, with the last sample tested after 9 weeks of preservation. It was shown that after 9 weeks of preservation in ethanol, followed by rehydration with physiological saline, the fracture toughness of the specimen was unchanged from that of the control specimen. Omission of rehydration in saline resulted in to an increased fracture toughness of up to 17%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Ritchie RO, Kinney JH, Kruzic JJ, Nalla RK (2005) A fracture mechanics and mechanistic approach to the failure of cortical bone. Fatigue Fract Eng Mater Struct 28:345–37110.1111/j.1460-2695.2005.00878.x ↗
2. Currey JD (1999) The design of mineralised hard tissues for their mechanical functions. J Exp Biol 202:3285–329410.1242/jeb.202.23.3285 ↗
3. George WT, Vashishth D (2005) Damage mechanisms and failure modes of cortical bone under components of physiological loading. J Orthop Res 23:1047–105310.1016/j.orthres.2005.02.008 ↗
4. Nalla RK, Kinney JH, Ritchie RO (2003) On the fracture of human dentin: is it stress- or strain-controlled? J Biomed Mater Res A 67A:484–49510.1002/jbm.a.10079 ↗
5. Nalla RK, Kruzic JJ, Ritchie RO (2004) On the origin of the toughness of mineralized tissue: microcracking or crack bridging? Bone 34:790–79810.1016/j.bone.2004.02.001 ↗
6. Akkus O, Yeni YN, Wasserman N (2004) Fracture mechanics of cortical bone: a hierarchical perspective. Crit Rev Biomed Eng 32:379–42510.1615/CritRevBiomedEng.v32.i56.10 ↗
7. Gao H (2006) Application of fracture mechanics concepts to hierarchical biomechanics of bone and bone-like materials. Int J Fract 138:101–13710.1007/s10704-006-7156-4 ↗
8. Peterlik H, Roschger P, Klaushofer K, Fratzl P (2006) From brittle to ductile fracture of bone. Nat Mater 5:52–5510.1038/nmat1545 ↗
9. Mullins LP, Bruzzi MS, McHugh PE (2007) Measurement of the microstructural fracture toughness of cortical bone using indentation fracture. J Biomech 40:3285–328810.1016/j.jbiomech.2007.04.020 ↗
10. Kulin RM, Jiang F, Vecchio KS (2008) Aging and loading rate effects on the mechanical behavior of equine bone. Jom 60:39–4410.1007/s11837-008-0069-0 ↗
11. Yan JH, Clifton KB, Mecholsky JJ, Gower LA (2007) Effect of temperature on the fracture toughness of compact bone. J Biomech 40:1641–164510.1016/j.jbiomech.2006.07.011 ↗
12. Koester KJ, Ager JW, Ritchie RO (2008) The effect of aging on crack-growth resistance and toughening mechanisms in human dentin. Biomaterials 29:1318–132810.1016/j.biomaterials.2007.12.008 ↗
13. Lucksanasombool P, Higgs WAJ, Higgs R, Swain MV (2001) Fracture toughness of bovine bone: influence of orientation and storage media. Biomaterials 22:3127–313210.1016/S0142-9612(01)00062-X ↗
14. Brown CU, Yeni YN, Norman TL (2000) Fracture toughness is dependent on bone location—a study of the femoral neck, femoral shaft, and the tibial shaft. J Biomed Mater Res 49:380–38910.1002/(SICI)1097-4636(20000305)49:3<380::AID-JBM11>3.0.CO;2-W ↗
15. Setubal Andrade MG, Sa CN, Teixeira Marchionni AM, dos Santos Calmon de Bittencourt TCB, Sadigursky M (2008) Effects of freezing on bone histological morphology. Cell Tissue Bank 9:279–28710.1007/s10561-008-9065-4 ↗
16. Yan JH, Daga A, Kumar R, Mecholsky JJ (2008) Fracture toughness and work of fracture of hydrated, dehydrated, and ashed bovine bone. J Biomech 41:1929–193610.1016/j.jbiomech.2008.03.037 ↗
17. Ohman C, Dall’Ara E, Baleani M, Jan SVS, Viceconti M (2008) The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone. Clin Biomech 23:1294–129810.1016/j.clinbiomech.2008.07.007 ↗
18. Kikugawa H, Asaka T, Miyake M (2007) Effect of preservative solution on fracture characteristics of bovine femoral cortical bone. Mater Trans 48:1417–142110.2320/matertrans.MRA2006368 ↗
19. Sasaki N, Nozoe T, Nishihara R, Fukui A (2008) Effect of mineral dissolution from bone specimens on the viscoelastic properties of cortical. J Biomech 41:3511–351410.1016/j.jbiomech.2008.09.019 ↗
20. Nalla RK, Balooch M, Ager JW, Kruzic JJ, Kinney JH, Ritchie RO (2005) Effects of polar solvents on the fracture resistance of dentin: role of water hydration. Acta Biomater 1:31–4310.1016/j.actbio.2004.08.002 ↗
21. Nalla RK, Kinney JH, Tomsia AP, Ritchie RO (2006) Role of alcohol in the fracture resistance of teeth. J Dent Res 85:1022–102610.1177/154405910608501109 ↗
22. Beaupied H, Dupuis A, Arlettaz A, Brunet-Imbault B, Bonnet N, Jaffre C, Benhamou CL, Courteix D (2006) The mode of bone conservation does not affect the architecture and the tensile properties of rat femurs. Biomed Mater Eng 16:253–259
23. ASTM (2006) Annual book of astm standards. Section 8, in D790-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. Philadelphia, PA
24. ASTM (2001) Annual book of astm standards. Section 3, in E399-90 Metals test methods and analytical procedures. Philadelphia, PA
25. Milton JS, Arnold JC (2003) Introduction to probability and statistics: principles and applications for engineering and the computing sciences. McGraw-Hill, Boston
26. Johnson RA (2005) Miller & freund’s probability and statistics for engineers. Pearson Prentice Hall, Upper Saddle River
27. Yeni YN, Brown CU, Norman TL (1998) Influence of bone composition and apparent density on fracture toughness of the human femur and tibia. Bone 22:79–8410.1016/S8756-3282(97)00227-5 ↗
28. Currey JD (2003) Role of collagen and other organics in the mechanical properties of bone. Osteoporos Int 14:S29–S3610.1007/s00198-003-1470-8 ↗
29. Wang XD, Bank RA, TeKoppele JM, Hubbard GB, Athanasiou KA, Agrawal CM (2000) Effect of collagen denaturation on the toughness of bone. Clin Orthop Relat Res 228–23910.1097/00003086-200002000-00027 ↗
30. Burr DB (2002) The contribution of the organic matrix to bone’s material properties. Bone 31:8–1110.1016/S8756-3282(02)00815-3 ↗
31. Pashley DH, Agee KA, Carvalho RM, Lee KW, Tay FR, Callison TE (2003) Effects of water and water-free polar solvents on the tensile properties of demineralized dentin. Dent Mater 19:347–35210.1016/S0109-5641(02)00065-9 ↗
32. Kruzic J, Nalla RK, Kinney JH, Ritchie RO (2003) Crack blunting, crack bridging and resistance-curve fracture mechanics in dentin: Effect of hydration. Biomaterials 24:5209–522110.1016/S0142-9612(03)00458-7 ↗