Support of Dynamic Measurements Through Similitude Formulations
Source abstract
Abstract
Abstract Up to now, similitude methods have been used in order to overcome the typical drawbacks of experimental testing and numerical simulations by reconstructing the full-scale model behavior from that of the scaled model. The novelty of this work is the application of similitude theory not as a tool for predicting the prototype dynamic response, but for supporting, and eventually validating, experimental measurements polluted by noise. Two Aluminium Foam Sandwich (AFS) plates are analyzed with Digital Image Correlation (DIC) cameras. First, an algorithm for blind source separation problems is used to extract information about the excitation; then, SAMSARA (Similitude and Asymptotic Models for Structural-Acoustic Research Applications) similitude method is applied to both the force spectra and velocity responses of prototype and model. The reconstruction of force and velocity curves demonstrates that the similitude results are coherent with the quality of the experimental measurements: when the spatial pattern in resonance is recognizable, then the curves overlap. Instead, when the displacement field of just one model is not well identified, the reconstruction exhibits discrepancies. Therefore, similitude methods reveal to be an interesting tool for understanding if a set of measurements is reliable or not and their application should not be underestimated, especially in the light of the expanding range of approaches which can extract important information from noisy observations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Optical measurement and interference techniques · Vehicle Noise and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Adams C, Bös J, Slomski EM, Melz T (2018) Scaling laws obtained from a sensitivity analysis and applied to thin vibrating structures. Mech Syst Signal Process 110:590–61010.1016/j.ymssp.2018.03.032 ↗
2. Asl M, Niezrecki C, Sherwood J, Avitabile P (2016) Similitude analysis of the strain field for loaded composite I–beams emulating wind turbine blades
3. Asl ME, Niezrecki C, Sherwood J, Avitabile P (2017) Similitude analysis of the frequency response function for scaled structures. In: Barthorpe R, Platz R, Lopez I, Moaveni B, Papadimitriou C (eds) Model validation and uncertainty quantification, vol 3. conference proceedings of the society fro experimental mechanics series. Springer, Cham10.1007/978-3-319-54858-6_21 ↗
4. Asl ME, Niezrecki C, Sherwood J, Avitabile P (2017) Vibration prediction of thin-walled composite I–beams using scaled models. Thin-Walled Struct 113:151–16110.1016/j.tws.2017.01.020 ↗
5. Becker T, Splitthof K, Siebert T, Kletting P (2006) Error estimations of 3D digital image correlation measurements. Proc. SPIE, 6341:63410F–1–63410F–610.1117/12.695277 ↗
6. Belouchrani A, Abed-Meraim K, Cardoso J, Moulines E (1997) A blind source separation technique using second.order statistics. IEEE Trans Signal Process 45(2):434–44410.1109/78.554307 ↗
7. Blevins RD (2016) Formulas for dynamics, acoustics and vibration. In: The atrium, southern gate, chichester, west sussex, PO19 8SQ. Wiley, United Kingdom
8. Casaburo A, Petrone G, Franco F, De Rosa S (2019) A review of similitude methods for structural engineering. Appl Mechan Rev 71(3)10.1115/1.4043787 ↗
9. Casaburo A, Petrone G, Meruane V, Franco F, De Rosa S (2019) Prediction of the dynamic behavior of beams in similitude using machine learning methods. Aerotecnica Missili e Spazio 98(4):283–29110.1007/s42496-019-00029-y ↗
10. Chen Y, Avitabile P, Dodson J (2020) Data consistency assessment function (dcaf). Mech Syst Signal Process 14110.1016/j.ymssp.2020.106688 ↗
11. Chen Y, Logan P, Avitabile P, Dodson J (2019) Non-model based expansion from limited points to augmented set of points using chebyshev polynomials. Exp Tech 43(5):521–54310.1007/s40799-018-00300-0 ↗
12. Coutinho CP, Baptista AJ, Rodrigues JD (2016) Reduced scale models based on similitude theory: A review up to 2015. Eng Struct 119:81–9410.1016/j.engstruct.2016.04.016 ↗
13. Cremer L, Heckl M, Petersson BAT (2005) Structural vibrations and sound radiation at audio frequencies, 3rd edn. Springer, New York
14. D’Alessandro V, Petrone G, De Rosa S, Franco F (2014) Modelling of aluminium foam sandwich panels. Smart Struct Syst 13(4):615–63610.12989/sss.2014.13.4.615 ↗
15. De Rosa S, Franco F, Li X, Polito T (2012) A similitude for structural acoustic enclosures. Mech Syst Signal Process 30:330–34210.1016/j.ymssp.2012.01.018 ↗
16. De Rosa S, Franco F, Mace BR (2005) The asymptotic scaled modal analysis for the response of a 2-plate assembly. Volterra (PI), Italy, pp 19–22. XVIII AIDAA National Congress
17. De Rosa S, Franco F, Meruane V (2015) Similitudes for structural response of flexural plates. Proc Instit MEchanical Eng Part C J MEchanical Eng Sci 230(3):174–188
18. Ewins DJ (2000) Modal testing: Theory, practice and application, 2nd edn. Wiley, Eastbourne (UK)
19. Franco F, Robin O, Ciappi E, De Rosa S, Berry A, Petrone G (2019) Similitude laws for the structural response of flat plates under a turbulent boundary layer excitation. Mech Syst Signal Process 129:590–61310.1016/j.ymssp.2019.04.045 ↗
20. Goodier JN, Thomson WT (1944) Applicability of similarity principles to structural models. Technical Report NACA Technical Report CR-4068, National Advisory Committee for Aeronautics Washington (DC) USA
21. Jia Y, Yang Z, Liu E, Fan Y, Yang X (2020) Prediction of random dynamic loads using second-order blind source identification algorithm. Proc IMechE Part C J Mechan Eng Sci 234(9):1720–173210.1177/0954406219899412 ↗
22. Jones EMC, Quintana EC, Reu PL, Wagner JL (2019) X-ray stereo digital image correlation. Exp Tech 44(2):159–17410.1007/s40799-019-00339-7 ↗
23. Kasivitamnuay J, Singhatanadgid P (2005) Application of an energy theorem to derive a scaling law for structural behaviors. Thammasat. Int. J. Sc Tech. 10(4):33–40
24. Kline SJ (1965) Similitude and approximation theory. McGraw-Hill, New York
25. Li BJ, Wang QB, Duan DP (2019) Displacement measurement errors in digital image correlation due to displacement mapping function. Exp Tech 43(4):445–45610.1007/s40799-018-00301-z ↗
26. Luo Z, Wang Y, Zhu Y, Zhao X, Wang D (2015) The similitude design method of thin-walled annular plates and determination of structural size intervals. Proc Instit Mechan Eng Part C J Mechan Eng Sci 230(13):2158–216810.1177/0954406215592055 ↗
27. McNeill SI, Zimmerman DC (2008) A framework for blind modal identification using joint approximate diagonalization. Mech Syst Signal Process 22:1526–154810.1016/j.ymssp.2008.01.010 ↗
28. Petrone G, D’Alessandro V, Franco F, De Rosa S (2014) Numerical and experimental investigations on the acoustic power radiated by aluminium foam sandwich panels. Compos Struct 118:170–17710.1016/j.compstruct.2014.07.031 ↗
29. Powell CA, Stephens DG (1966) Vibrational characteristics of sandwich panels in a reduced-pressure environment. Technical Report NASA TN D-3549, National Aeronautics and Space Administration, Langley Research Center, Langley Station, Hampton (VA) USA
30. Rezaeepazhand J, Simitses GJ, Starnes JH Jr (1996) Design of scaled down models for predicting shell vibration response. J Sound Vib 195(2):301–31110.1006/jsvi.1996.0423 ↗
31. Sarrafi A, Mao Z, Niezrecki C, Poozesh P (2018) Vibration-based damage detection in wind turbine blades using phase-based motion estimation and motion magnification. J Sound Vib 421:300–31810.1016/j.jsv.2018.01.050 ↗
32. Siebert T, Becker T, Splitthof K, Neumann I, Krupka R (2007) Error estimations in digital image correlation technique. Appl Mechan Mater 7–8:265–27010.4028/www.scientific.net/AMM.7-8.265 ↗
33. Siebert T, Becker T, Splitthof K, Neumann I, Krupka R (2007) High-speed digital image correlation: Error estimations and applications. Opt Eng 46(5):051004–1–051004–710.1117/1.2741217 ↗
34. Simitses GJ, Rezaeepazhand J (1993) Structural similitude for laminated structures. Compos Eng 3(7–8):751–76510.1016/0961-9526(93)90094-Z ↗
35. Simitses GJ, Starnes JH Jr, Rezaeepazhand J (2000) Structural similitude and scaling laws for plates and shells: A review. pp 1–11, Atlanta (GA), USA, 3–6 April. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit10.2514/6.2000-1383 ↗
36. Torkamani S, Jafari AA, Navazi HM, Bagheri M (2009) Structural similitude in free vibration of orthogonally stiffened cylindrical shells. Thin-Walled Struct 47:1316–133010.1016/j.tws.2009.03.013 ↗
37. Vinson JR (1999) The behavior of sandwich structures of isotropic and composite materials. Taylor and Francis Technomic Publishing Co, Lancaster
38. Zhihui Z, Sihui L, Qianshuo F, Yuanchang C, Fan W, Lizhong J (2020) A hybrid dic-efg method for strain field characterization and stress intensity factor evaluation of a fatigue crack. Measurement 15410.1016/j.measurement.2020.107498 ↗
39. Zhu Y, Luo Z, Zhao X, Wang D (2017) Similitude design for the vibration problems of plates and shells: A review. Front Mech Eng 12(2):253–26410.1007/s11465-017-0418-1 ↗