Fan-Blade-out Experiment at Small Scale
Source abstract
Abstract
This paper describes a low cost, small scale spin rig. The rig is housed in a steel vacuum chamber of 203 mm (8 in) diameter and powered by a 3HP variable speed DC electric motor. The small rig was developed to test the experimental procedure and data acquisition techniques and to investigate the dynamic characteristics of a high speed rotating system. Using this rig, fan-blade-out (FBO) experiments were carried out. The notched blade releasing mechanism was investigated. The relationship between the notch depth and the release speed was modified with the consideration of the notch concentration factor. The predicted release speed agreed reasonably well with the experimental data. A simple wire trigger method for data acquisition was developed. Synchronized high speed video images and sensor signals during FBO events were obtained. The observed phenomena were similar to those reported using larger spin rigs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Bearings and Levitation Dynamics · Tribology and Lubrication Engineering · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Carney KS, Lawrence C, Carney DV (2002) “Aircraft engine blade-out dynamics,” 7th International LS-DYNA User Conference, Dearborn, Michigan
2. Sinka SK, Dorbala S (2009) Dynamic loads in the fan containment structure of a turbine engine. J Aerosp Eng 22:260–26910.1061/(ASCE)0893-1321(2009)22:3(260) ↗
3. Heermann KF, Kriksson RH and McClure KR (1977) “Study to Improve Turbine Engine Rotor Blade Containment,” DTIC Document
4. Carter TJ (2005) Common failures in gas turbine blades. Eng Fail Anal 12(2):237–24710.1016/j.engfailanal.2004.07.004 ↗
5. Mathis JA (1997) DOT/FAA/AR-96/121, Design and analysis of turbine rotor fragment hazard containment
6. General Electric Company, Impact Resistance of Composite Fan Blades, NASA CR-134707, 1974
7. Lane AD (1989) Development of an Advanced Fan Blade Containment System, DTIC Document
8. Xuan H, Wu R (2006) Aeroengine turbine blade containment tests using high-speed rotor spin testing facility. Aerosp Sci Technol 10(6):501–50810.1016/j.ast.2006.04.006 ↗
9. He Q, Xuan H, Liao L, Hong W, Wu R (2012) Simulation methodology development for rotating blade containment analysis. J Zhejiang Univ Sci A 13(4):239–25910.1631/jzus.A1100294 ↗
10. Naik D, Sankaran S, Mobasher B, Rajan SD, Pereira JM (2009) Development of reliable modeling methodologies for fan blade out containment analysis – part I: experimental studies. Int J Impact Eng 36(1):1–1110.1016/j.ijimpeng.2008.03.007 ↗
11. Carney KS, Pereira JM, Revilock DM, Matheny P (2009) Jet engine fan blade containment using an alternate geometry. Int J Impact Eng 36:720–72810.1016/j.ijimpeng.2008.10.002 ↗
12. Roberts GD, Braley MS, Arnold WA, Dorer JD, Watson WR (2009) Design and testing of braided composite fan case materials and components, NASA/TM-2009-215811
13. Hagg AC, Sankey GO (1974) The containment of disk burst fragments by cylindrical shells, Journal of Engineering for Power, Transaction of the ASME, 11410.1115/1.3445758 ↗
14. Sarkar S, Atluri SN (1996) Effects of multiple blade interaction on the containment of blade fragments during a rotor failure. Finite Elem Anal Des 23(2):211–22310.1016/S0168-874X(96)80008-4 ↗
15. Jain R (2010) “Prediction of transient loads and perforation of engine casing during blade-off event of fan rotor assembly,” Proceedings of the IMPLAST 2010 Conference
16. Roberts G.D, Private communication
17. Lucy M, Hardy R, Kist E, Watson J and Wise S (1996) “Report on alternative devices to pyrotechnics on spacecraft,” DTIC Document
18. Dixon S (2005) Fluid mechanics and thermodynamics of Turbomachinery. Pergamon Press Ltd., Burlington
19. Hertzberg RW (1996) Deformation and fracture mechanics of engineering materials, 4th edn. Wiley, New York