journal article·2020-11

Prediction of quasistatic constitutive equations of moisture-absorbed epoxy polymers using atomistic simulations

Hyungbum Park, Seunghwa Yang, Jangwoo Han, Maenghyo Cho

Publisher page

Abstract

Abstract The quasistatic constitutive equations of moisture-absorbed epoxy polymers were predicted from molecular dynamics (MD) simulations based on the Argon theory and cooperative model to overcome the timescale limitation of classical MD simulations. A nonlinear degradation of the elasto-plastic mechanical behavior corresponding to moisture uptake, which arose from the involvement of water molecules on the accommodation of deformation, was identified and reflected in the proposed method to derive the quasistatic deformation behaviors. The influence of the moisture uptake on the glass transition temperature ( T g ) was also evaluated by the Kelly–Bueche equation to determine the uncertainty of the T g predicted by typical MD cooling-down simulations. It was revealed that the one-dimensional constitutive equations constructed by contemporary methods exhibited a severe stress reduction in stress–strain relations after the 8 wt% moisture content. The proposed method can provide a means to construct a multiscale model while considering changes in the mechanical properties according to the microstructural variation from polymer–solvent interactions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Polymer crystallization and properties · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Effect of thermal history on water sorption, elastic properties and the glass transition of epoxy resins10.1016/0032-3861(79)90307-0 ↗
2. Moisture sorption–desorption–resorption characteristics and its effect on the mechanical behavior of the epoxy system10.1016/j.polymer.2005.10.002 ↗
3. Effect of the hardener to epoxy monomer ratio on the water absorption behavior of the DGEBA/TETA epoxy system10.1590/0104-1428.2106 ↗
5. Investigation of moisture diffusion in epoxy system: Experiments and molecular dynamics simulations10.1016/j.cplett.2005.07.022 ↗
6. Atomistic simulation study of absorbed water influence on structure and properties of crosslinked epoxy resin10.1016/j.polymer.2007.06.038 ↗
7. Molecular modeling for calculation of mechanical properties of epoxies with moisture ingress10.1016/j.polymer.2009.04.021 ↗
8. Investigation of hygroscopic properties in electronic packages using molecular dynamics simulation10.1016/j.polymer.2011.05.056 ↗
9. Molecular dynamics and micromechanics study of hygroelastic behavior in graphene oxide-epoxy nanocomposites10.1016/j.compositesb.2019.01.059 ↗
10. A molecular dynamics study of water transport inside an epoxy polymer matrix10.1016/j.commatsci.2015.04.032 ↗
11. Investigation of moisture diffusion in cross-linked epoxy moulding compound by molecular dynamics simulation10.1080/08927022.2012.725204 ↗
12. Effects of moisture exposure on the crosslinked epoxy system: an atomistic study10.1088/0965-0393/24/3/035011 ↗
13. Effects of water on epoxy cure kinetics and glass transition temperature utilizing molecular dynamics simulations10.1002/polb.24357 ↗
14. Toward the constitutive modeling of high performance epoxy matrix: temperature-accelerated quasi-static molecular simulations consistent with the experimental test10.1016/j.compositesb.2018.01.018 ↗
15. A multiscale model for the quasi-static thermo-plastic behavior of highly cross-linked glassy polymers10.1021/acs.macromol.5b01236 ↗
16. Molecular dynamics simulations of compressive yielding in cross-linked epoxies in the context of Argon theory10.1016/j.ijplas.2013.01.004 ↗
17. A multiscale framework for the elasto-plastic constitutive equations of crosslinked epoxy polymers considering the effects of temperature, strain rate, hydrostatic pressure, and crosslinking density10.1016/j.jmps.2020.103962 ↗
18. Systematic method for thermomechanically consistent coarse-graining: A universal model for methacrylate-based polymers10.1021/ct500080h ↗
19. A theory for the low-temperature plastic deformation of glassy polymers10.1080/14786437308220987 ↗
20. Comment on the compression yield behaviour of polymethyl methacrylate over a wide range of temperatures and strain-rates10.1007/BF00545162 ↗
21. The role of recovery forces in the deformation of linear polyethylene10.1007/BF00544690 ↗
22. Viscosity and glass temperature relations for polymer-diluent systems10.1002/pol.1961.1205015421 ↗
23. Atomistic simulation based prediction of the solvent effect on the molecular mobility and glass transition of poly (methyl methacrylate)10.1063/1.4788744 ↗
24. Computing thermomechanical properties of crosslinked epoxy by molecular dynamic simulations10.1016/j.polymer.2012.08.045 ↗
25. Material properties of the cross-linked epoxy resin compound predicted by molecular dynamics simulation10.1016/j.polymer.2007.02.007 ↗
26. Effect of molecular structure of curing agents on cyclic creep in highly crosslinked epoxy polymers10.1002/pol.20200130 ↗
27. Einstein · 1956
28. The mechanisms of elevated temperature property losses in high performance structural epoxy resin matrix materials after exposures to high humidity environments10.1002/pen.760180104 ↗
29. Epoxy resin based nanocomposites: 1. diglycidylether of bisphenol A (DGEBA) with triethylenetetramine (TETA)10.1002/pi.1638 ↗
30. Yield conditions for deformation of amorphous polymer glasses10.1103/PhysRevE.64.051801 ↗
31. Molecular dynamics predictions of thermal and mechanical properties of thermoset polymer EPON862/DETDA10.1016/j.polymer.2011.04.041 ↗
32. Crack blunting mechanisms in polymers10.1007/BF00552112 ↗
33. Ageing of the DGEBA/TETA epoxy system with off-stoichiometric compositions10.1590/S1516-14392003000300017 ↗
34. Studies on the characterization of piassava fibers and their epoxy composites10.1016/j.compositesa.2011.12.004 ↗
35. Yielding behaviour in model epoxy thermosets—I. Effect of strain rate and composition10.1016/S0032-3861(97)10334-2 ↗
36. Temperature and strain rate dependence of yield strain and deformation behavior in polyethylene10.1002/(SICI)1099-0488(199703)35:4<545::AID-POLB2>3.0.CO;2-P ↗
37. Effects of curing program on mechanical behavior and water absorption of DGEBA/TETA epoxy network10.1002/app.38843 ↗
38. Impact of polar groups concentration and free volume on water sorption in model epoxy free films and coatings10.1016/j.porgcoat.2015.12.011 ↗
39. Failure surfaces in principal stress space10.1002/polc.5070320113 ↗