Buckling-driven periodic wrinkle patterns in a film-lattice structure
Source abstract
Abstract
Abstract Film structures have been widely used in flexible electronics, material science, metrology, biomedical engineering and aerospace engineering. When a thin film is loaded with compressive stresses, buckling accompanied by wrinkles is likely to occur under constrained boundaries. Many previous studies have focused on the wrinkling mechanism of a free-standing film or a film–substrate structure, in which compressive stresses in the film are caused by the mismatch between the film and the imposed constrains from its boundaries or the substrate. Instead of using the homogeneous substrate, here we propose a film-lattice structure consisting of a thin film bonded to a bottom-supported lattice. By controlling the buckling of the lattice structure, a distribution of compressive loads can be applied to the film, finally resulting in the generation of periodic wrinkles. Physical mechanism on the buckling-driven wrinkle pattern is investigated with the increasing loading. Dimensionless parameters and their effect on governing the wrinkling mode are also analyzed numerically. The exploration on features of the wrinkles on the film shows that the wrinkle pattern can be controlled by designing the lattice substrate. Our works could help understand the wrinkling caused by the buckling of a complex substrate and guide the harnessing of wrinkles in the design of new materials and structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials and Mechanics · Structural Analysis and Optimization · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Recent studies on super-hydrophobic films
2. On the growth and form of the gut10.1038/nature10277 ↗
3. Dynamic display of biomolecular patterns through an elastic creasing instability of stimuli-responsive hydrogels10.1038/nmat2606 ↗
4. Materials and mechanics for stretchable electronics10.1126/science.1182383 ↗
5. Wrinkled membranes I: experiments10.2140/jomms.2006.1.3 ↗
6. Theory of buckling and post-buckling behavior of elastic structures10.1016/S0065-2156(08)70030-9 ↗
7. Geometry and physics of wrinkling10.1103/PhysRevLett.90.074302 ↗
8. Corner wrinkling of a square membrane due to symmetric mechanical loads10.2514/2.3870 ↗
9. A stretchable form of single-crystal silicon for high-performance electronics on rubber substrates10.1126/science.1121401 ↗
10. Capillary wrinkling of floating thin polymer films10.1126/science.1144616 ↗
11. Wagner · 1931
12. Wagner · 1931
13. Wagner · 1931
14. Wrinkling of an elastic sheet under tension10.1038/419579b ↗
15. Buckling of stretched strips10.1016/S0045-7949(00)00072-9 ↗
16. Stretch-induced stress patterns and wrinkles in hyperelastic thin sheets10.1016/j.ijsolstr.2011.09.004 ↗
17. Stretch-induced wrinkling of polyethylene thin sheets: Experiments and modeling10.1016/j.ijsolstr.2014.01.028 ↗
18. Physical self-assembly of microstructures by anisotropic buckling10.1002/1521-4095(20021002)14:19<1383::AID-ADMA1383>3.0.CO;2-D ↗
19. Ordering of spontaneously formed buckles on planar surfaces10.1021/la991302l ↗
20. Nonlinear analyses of wrinkles in a film bonded to a compliant substrate10.1016/j.jmps.2005.03.007 ↗
21. Spontaneous formation of ordered structures in thin films of metals supported on an elastomeric polymer10.1038/30193 ↗
22. Evolution of wrinkles in hard films on soft substrates10.1103/PhysRevE.70.030601 ↗
23. Tailoring the wrinkle pattern of a microstructured membrane10.1063/1.4893596 ↗
24. Wrinkling of structured thin films via contrasted materials10.1039/C6SM00228E ↗
25. Buckling-induced reversible symmetry breaking and amplification of chirality using supported cellular structures10.1002/adma.201300617 ↗